On Wed, Jan 29, 2014 at 03:34:13PM +0100, Boris BREZILLON wrote: > nand-ecc-level property statically defines NAND chip's ECC requirements. > > Signed-off-by: Boris BREZILLON <b.brezillon.dev@xxxxxxxxx> > --- > Documentation/devicetree/bindings/mtd/nand.txt | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/Documentation/devicetree/bindings/mtd/nand.txt b/Documentation/devicetree/bindings/mtd/nand.txt > index 03855c8..0c962296 100644 > --- a/Documentation/devicetree/bindings/mtd/nand.txt > +++ b/Documentation/devicetree/bindings/mtd/nand.txt > @@ -3,5 +3,8 @@ > - nand-ecc-mode : String, operation mode of the NAND ecc mode. > Supported values are: "none", "soft", "hw", "hw_syndrome", "hw_oob_first", > "soft_bch". > +- nand-ecc-level : Two cells property defining the ECC level requirements. > + The first cell represent the strength and the second cell the ECC block size. > + E.g. : nand-ecc-level = <4 512>; /* 4 bits / 512 bytes */ > - nand-bus-width : 8 or 16 bus width if not present 8 > - nand-on-flash-bbt: boolean to enable on flash bbt option if not present false Hm.. when was this proposal agreed? It seems I've missed the discussion... FWIW, we've already proposed an equivalent one, but it received no feedback from the devicetree maintainers: http://comments.gmane.org/gmane.linux.drivers.devicetree/58764 Maybe we can discuss about it now? nand-ecc-strength : integer ECC required strength. nand-ecc-size : integer step size associated to the ECC strength. vs. nand-ecc-level : Two cells property defining the ECC level requirements. The first cell represent the strength and the second cell the ECC block size. E.g. : nand-ecc-level = <4 512>; /* 4 bits / 512 bytes */ It's really the same proposal but with a different format, right? IMHO, the former is more human-readable, but other than that I see no difference. Brian? DT-guys? -- Ezequiel García, Free Electrons Embedded Linux, Kernel and Android Engineering http://free-electrons.com -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
