[RFC PATCH v2 07/14] of: mtd: add documentation for the ONFI NAND timing mode property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add documentation for the ONFI NAND timing mode property.

Signed-off-by: Boris BREZILLON <b.brezillon.dev@xxxxxxxxx>
---
 Documentation/devicetree/bindings/mtd/nand.txt |    5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/mtd/nand.txt b/Documentation/devicetree/bindings/mtd/nand.txt
index 0c962296..75e46f3 100644
--- a/Documentation/devicetree/bindings/mtd/nand.txt
+++ b/Documentation/devicetree/bindings/mtd/nand.txt
@@ -8,3 +8,8 @@
   E.g. : nand-ecc-level = <4 512>; /* 4 bits / 512 bytes */
 - nand-bus-width : 8 or 16 bus width if not present 8
 - nand-on-flash-bbt: boolean to enable on flash bbt option if not present false
+- onfi,nand-timing-mode: an integer encoding the ONFI timing mode of the NAND
+  chip. This is only used when the chip does not support the ONFI standard.
+  Choose the closest mode fulfilling the NAND chip timings.
+  For a full description of the different timing modes see this document:
+  www.onfi.org/~/media/ONFI/specs/onfi_3_1_spec.pdf‎
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux