The documentation is erroneously stating that spi-cpha is required, and the example is erroneously setting both spi-cpol and spi-cpha. According to the datasheet, only cpol should be set. On zedboard for instance, setting the devicetree as in the example will simply not work. Fixes: 416f882c3b40 ("dt-bindings: iio: adc: Migrate AD7606 documentation to yaml") Fixes: 6e33a125df66 ("dt-bindings: iio: adc: Add docs for AD7606 ADC") Reviewed-by: Rob Herring (Arm) <robh@xxxxxxxxxx> Signed-off-by: Guillaume Stols <gstols@xxxxxxxxxxxx> --- Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml index bec7cfba52a7..47081c79a1cf 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml @@ -39,6 +39,11 @@ properties: "#size-cells": const: 0 + # According to the datasheet, "Data is clocked in from SDI on the falling + # edge of SCLK, while data is clocked out on DOUTA on the rising edge of + # SCLK". Also, even if not stated textually in the datasheet, it is made + # clear on the diagrams that sclk idles at high. Subsequently, in case SPI + # interface is used, the correct way is to only set spi-cpol. spi-cpha: true spi-cpol: true @@ -168,7 +173,6 @@ patternProperties: required: - compatible - reg - - spi-cpha - avcc-supply - vdrive-supply - interrupts @@ -255,7 +259,6 @@ examples: reg = <0>; spi-max-frequency = <1000000>; spi-cpol; - spi-cpha; avcc-supply = <&adc_vref>; vdrive-supply = <&vdd_supply>; @@ -288,7 +291,6 @@ examples: spi-max-frequency = <1000000>; spi-cpol; - spi-cpha; avcc-supply = <&adc_vref>; vdrive-supply = <&vdd_supply>; -- 2.34.1