Re: [PATCH 2/3] misc: bmp085: Add DT bindings for EOC gpio line and direct irq.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Mark,

On Fri, Nov 15, 2013 at 4:30 PM, Mark Rutland <mark.rutland@xxxxxxx> wrote:
> On Thu, Nov 14, 2013 at 09:46:48PM +0000, Marek Belisko wrote:
>> Signed-off-by: Marek Belisko <marek@xxxxxxxxxxxxx>
>> ---
>>  Documentation/devicetree/bindings/misc/bmp085.txt |  8 ++++
>>  drivers/misc/bmp085.c                             | 53 ++++++++++++++++++++---
>>  2 files changed, 55 insertions(+), 6 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/misc/bmp085.txt b/Documentation/devicetree/bindings/misc/bmp085.txt
>> index 91dfda2..c6033d5 100644
>> --- a/Documentation/devicetree/bindings/misc/bmp085.txt
>> +++ b/Documentation/devicetree/bindings/misc/bmp085.txt
>> @@ -8,6 +8,9 @@ Optional properties:
>>  - temp-measurement-period: temperature measurement period (milliseconds)
>>  - default-oversampling: default oversampling value to be used at startup,
>>    value range is 0-3 with rising sensitivity.
>> +- gpio: if device is using EOC irq line gpio can be specified to setup interrupt
>> +  handling
>> +- irq: interrupt with no gpio
>>
>>  Example:
>>
>> @@ -17,4 +20,9 @@ pressure@77 {
>>       chip-id = <10>;
>>       temp-measurement-period = <100>;
>>       default-oversampling = <2>;
>> +     gpio = <&gpio0 17 0>;
>> +
>> +     OR
>> +
>> +     irq = <75>;
>
> There's some contention over the description of gpio-based IRQs in DT.
> From the point of view of the device there is a logical IRQ output; the
> fact that this happens to be wired up to a GPIO pin that can happen to
> generate interrupts isn't anything to do with the device itself. There
> are plenty of device we have now whose interrupt lines could be wired to
> GPIOs. I see no reason to extend their bindings to support explicit
> GPIOs for IRQs, and I see no reason the driver should have to handle
> this.
>
> It would be far nicer for the device binding to just have the interrupts
> property, and for the gpio controller to act as an interrupt-controller,
> with the appropriate pin management.
OK. Can you please give me some example in current bindings tree?
Something like in:
Documentation/devicetree/bindings/fb/mxsfb.txt ? So if I understand
correctly we define only property
interrupts = <xxx> which will be exact interrupt number for cpu gpio
connected to bmp085 irq line.
>
> Thanks,
> Mark.

Thanks,

marek

-- 
as simple and primitive as possible
-------------------------------------------------
Marek Belisko - OPEN-NANDRA
Freelance Developer

Ruska Nova Ves 219 | Presov, 08005 Slovak Republic
Tel: +421 915 052 184
skype: marekwhite
twitter: #opennandra
web: http://open-nandra.com
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux