From: Navneet Singh <navneet.singh@xxxxxxxxx>
Per the CXL 3.1 specification software must check the Command Effects
Log (CEL) for dynamic capacity command support.
Detect support for the DCD commands while reading the CEL, including:
Get DC Config
Get DC Extent List
Add DC Response
Release DC
Signed-off-by: Navneet Singh <navneet.singh@xxxxxxxxx>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
Reviewed-by: Fan Ni <fan.ni@xxxxxxxxxxx>
Reviewed-by: Dave Jiang <dave.jiang@xxxxxxxxx>
Reviewed-by: Davidlohr Bueso <dave@xxxxxxxxxxxx>
Co-developed-by: Ira Weiny <ira.weiny@xxxxxxxxx>
Signed-off-by: Ira Weiny <ira.weiny@xxxxxxxxx>
---
Changes:
[iweiny: Keep tags for this early simple patch]
[Davidlohr: update commit message]
[djiang: Fix misalignment]
---
drivers/cxl/core/mbox.c | 33 +++++++++++++++++++++++++++++++++
drivers/cxl/cxlmem.h | 15 +++++++++++++++
2 files changed, 48 insertions(+)
diff --git a/drivers/cxl/core/mbox.c b/drivers/cxl/core/mbox.c
index e5cdeafdf76e..8eb196858abe 100644
--- a/drivers/cxl/core/mbox.c
+++ b/drivers/cxl/core/mbox.c
@@ -164,6 +164,34 @@ static void cxl_set_security_cmd_enabled(struct cxl_security_state *security,
}
}
+static bool cxl_is_dcd_command(u16 opcode)
+{
+#define CXL_MBOX_OP_DCD_CMDS 0x48
+
+ return (opcode >> 8) == CXL_MBOX_OP_DCD_CMDS;
+}
+
+static void cxl_set_dcd_cmd_enabled(struct cxl_memdev_state *mds,
+ u16 opcode)
+{
+ switch (opcode) {
+ case CXL_MBOX_OP_GET_DC_CONFIG:
+ set_bit(CXL_DCD_ENABLED_GET_CONFIG, mds->dcd_cmds);
+ break;
+ case CXL_MBOX_OP_GET_DC_EXTENT_LIST:
+ set_bit(CXL_DCD_ENABLED_GET_EXTENT_LIST, mds->dcd_cmds);
+ break;
+ case CXL_MBOX_OP_ADD_DC_RESPONSE:
+ set_bit(CXL_DCD_ENABLED_ADD_RESPONSE, mds->dcd_cmds);
+ break;
+ case CXL_MBOX_OP_RELEASE_DC:
+ set_bit(CXL_DCD_ENABLED_RELEASE, mds->dcd_cmds);
+ break;
+ default:
+ break;
+ }
+}
+
static bool cxl_is_poison_command(u16 opcode)
{
#define CXL_MBOX_OP_POISON_CMDS 0x43
@@ -745,6 +773,11 @@ static void cxl_walk_cel(struct cxl_memdev_state *mds, size_t size, u8 *cel)
enabled++;
}
+ if (cxl_is_dcd_command(opcode)) {
+ cxl_set_dcd_cmd_enabled(mds, opcode);
+ enabled++;
+ }
+
dev_dbg(dev, "Opcode 0x%04x %s\n", opcode,
enabled ? "enabled" : "unsupported by driver");
}
diff --git a/drivers/cxl/cxlmem.h b/drivers/cxl/cxlmem.h
index afb53d058d62..f2f8b567e0e7 100644
--- a/drivers/cxl/cxlmem.h
+++ b/drivers/cxl/cxlmem.h
@@ -238,6 +238,15 @@ struct cxl_event_state {
struct mutex log_lock;
};
+/* Device enabled DCD commands */
+enum dcd_cmd_enabled_bits {
+ CXL_DCD_ENABLED_GET_CONFIG,
+ CXL_DCD_ENABLED_GET_EXTENT_LIST,
+ CXL_DCD_ENABLED_ADD_RESPONSE,
+ CXL_DCD_ENABLED_RELEASE,
+ CXL_DCD_ENABLED_MAX
+};
+
/* Device enabled poison commands */
enum poison_cmd_enabled_bits {
CXL_POISON_ENABLED_LIST,
@@ -454,6 +463,7 @@ struct cxl_dev_state {
* (CXL 2.0 8.2.9.5.1.1 Identify Memory Device)
* @mbox_mutex: Mutex to synchronize mailbox access.
* @firmware_version: Firmware version for the memory device.
+ * @dcd_cmds: List of DCD commands implemented by memory device
* @enabled_cmds: Hardware commands found enabled in CEL.
* @exclusive_cmds: Commands that are kernel-internal only
* @total_bytes: sum of all possible capacities
@@ -482,6 +492,7 @@ struct cxl_memdev_state {
size_t lsa_size;
struct mutex mbox_mutex; /* Protects device mailbox and firmware */
char firmware_version[0x10];
+ DECLARE_BITMAP(dcd_cmds, CXL_DCD_ENABLED_MAX);
DECLARE_BITMAP(enabled_cmds, CXL_MEM_COMMAND_ID_MAX);
DECLARE_BITMAP(exclusive_cmds, CXL_MEM_COMMAND_ID_MAX);
u64 total_bytes;
@@ -555,6 +566,10 @@ enum cxl_opcode {
CXL_MBOX_OP_UNLOCK = 0x4503,
CXL_MBOX_OP_FREEZE_SECURITY = 0x4504,
CXL_MBOX_OP_PASSPHRASE_SECURE_ERASE = 0x4505,
+ CXL_MBOX_OP_GET_DC_CONFIG = 0x4800,
+ CXL_MBOX_OP_GET_DC_EXTENT_LIST = 0x4801,
+ CXL_MBOX_OP_ADD_DC_RESPONSE = 0x4802,
+ CXL_MBOX_OP_RELEASE_DC = 0x4803,
CXL_MBOX_OP_MAX = 0x10000
};
--
2.45.2
