Hi Kamil, On Tue, Nov 5, 2013 at 3:06 PM, Kamil Debski <k.debski@xxxxxxxxxxx> wrote: > Hi, > >> From: Vivek Gautam [mailto:gautamvivek1987@xxxxxxxxx] >> Sent: Tuesday, November 05, 2013 8:20 AM >> To: Kishon Vijay Abraham I >> Cc: Kamil Debski; Vivek Gautam; Linux USB Mailing List; linux-samsung- >> soc@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; >> devicetree@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; >> linux-doc@xxxxxxxxxxxxxxx; Greg KH; Kukjin Kim; Sylwester Nawrocki; >> Tomasz Figa; Felipe Balbi; Julius Werner; Jingoo Han >> Subject: Re: [PATCH RFC 1/4] phy: Add new Exynos5 USB 3.0 PHY driver >> >> Hi Kishon, >> >> >> >> On Mon, Nov 4, 2013 at 6:42 PM, Kishon Vijay Abraham I <kishon@xxxxxx> >> wrote: >> > Hi, >> > >> > >> > On Monday 04 November 2013 03:45 PM, Kamil Debski wrote: >> >> >> >> Hi Kishon, >> >> >> >>> From: Kishon Vijay Abraham I [mailto:kishon@xxxxxx] >> >>> Sent: Monday, November 04, 2013 7:55 AM >> >>> >> >>> Hi Vivek, >> >>> >> >>> On Thursday 31 October 2013 01:15 PM, Vivek Gautam wrote: >> >>>> >> >>>> Add a new driver for the USB 3.0 PHY on Exynos5 series of SoCs. >> >>>> The new driver uses the generic PHY framework and will interact >> >>>> with >> >>>> DWC3 controller present on Exynos5 series of SoCs. >> >>> >> >>> >> >>> In Exynos, you have a single IP that supports both USB3 and USB2 >> PHY >> >>> right? I think that needs to be mentioned here. >> >> >> >> >> >> As far as I know the IP is different. >> > >> > >> > Ok. Sometime back Vivek was mentioning about a single IP for both >> USB3 >> > and USB2. Thought it should be this driver. Anyway thanks for the >> clarification. >> >> Right Kishon, I had mentioned that Exynos5's dwc3 controller have a >> single IP for USB2 and USB3 phy. >> From what i see, on exynos5 systems the dwc3 controller uses a combo of >> usb 2 (utmi+) and usb 3 (pipe 3) phy (with base address starting >> 0x12100000). >> >> Kamil, Tomasz, >> >> Please correct me if i am wrong. > > I have the Exynos 5250 documentation and I found two phy register ranges: > 1) USB 2.0 PHY having the base address of 0x1213 0000 > Chapter 33. USB 2.0 Host Controller > Subchapter 33.5.2 Phy Control Register p. 1696 > First register's description is > "USB2.0 phy control register" > 2) USB 3.0 PHY (I guess) with the base address 0x1210 0000 > Chapter 35. USB 3.0 DRD Controller > Subchapter 35.4.6 PHY Control Register p. 1872 > > Jingoo, could you comment on the above? You may know more than we do :) > > In addition, I have a question to you Vivek - does your USB 3.0 > PHY support both host and device? Yes, this PHY driver supports both Host as well as device type of operations of DWC3 controller. This driver is a straight port from older driver available at drivers/usb/phy/phy-samsung-usb3.c which also had been tested for host as well as device operation of DWC3. > > [snip] > > Best wishes, > Kamil Debski > -- Best Regards Vivek Gautam Samsung R&D Institute, Bangalore India -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
