On Tue, Nov 05, 2013 at 11:05:15AM +0800, Shawn Guo wrote:
> On Tue, Nov 05, 2013 at 09:49:43AM +0800, Peter Chen wrote:
> > We need this to keep PHY's power on or off during the system
> > suspend mode. If we need to enable USB wakeup, then we
> > must keep PHY's power being on during the system suspend mode.
> > Otherwise, we need to keep PHY's power being off to save power.
> >
> > Signed-off-by: Peter Chen <peter.chen@xxxxxxxxxxxxx>
> > ---
> > drivers/usb/phy/phy-mxs-usb.c | 66 +++++++++++++++++++++++++++++++++++++++--
> > 1 files changed, 63 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
> > index ff8b98c..4588c72 100644
> > --- a/drivers/usb/phy/phy-mxs-usb.c
> > +++ b/drivers/usb/phy/phy-mxs-usb.c
> > @@ -55,11 +55,18 @@
> > #define BM_USBPHY_DEBUG_CLKGATE BIT(30)
> >
> > /* Anatop Registers */
> > +#define ANADIG_ANA_MISC0 0x150
> > +#define ANADIG_ANA_MISC0_SET 0x154
> > +#define ANADIG_ANA_MISC0_CLR 0x158
> > +
> > #define ANADIG_USB1_VBUS_DET_STAT 0x1c0
> >
> > #define ANADIG_USB1_LOOPBACK_SET 0x1e4
> > #define ANADIG_USB1_LOOPBACK_CLR 0x1e8
> >
> > +#define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG BIT(12)
> > +#define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG_SL BIT(11)
> > +
> > #define BM_ANADIG_USB1_VBUS_DET_STAT_VBUS_VALID BIT(3)
> >
> > #define BM_ANADIG_USB1_LOOPBACK_UTMI_DIG_TST1 BIT(2)
> > @@ -83,6 +90,15 @@
> > */
> > #define MXS_PHY_SENDING_SOF_TOO_FAST BIT(2)
> >
> > +/* imx23 style PHY */
> > +#define MXS_PHY_IMX23 BIT(3)
> > +
> > +/* imx6q style PHY */
> > +#define MXS_PHY_IMX6Q BIT(4)
> > +
> > +/* imx6sl style PHY */
> > +#define MXS_PHY_IMX6SL BIT(5)
> > +
>
> We will not need these, if we do what I suggested to carry a pointer
> to mxs_phy_data in mxs_phy.
>
> struct mxs_phy {
> ...
> struct mxs_phy_data *data;
> };
>
> The check then can be done like below.
>
> static inline int is_imx6q_phy(struct mxs_phy *mxs_phy)
> {
> return mxs_phy->data == &imx6q_phy_data;
> }
>
What's the benefit compared to current one?
Peter
> Shawn
>
> > /*
> > * IC fix for MXS_PHY_ABNORAML_IN_SUSPEND, bit 17 is the effective bit
> > * in HW_USBPHY_IP.
> > @@ -100,19 +116,23 @@ struct mxs_phy_platform_flag {
> > };
> >
> > static const struct mxs_phy_platform_flag imx23_phy_data = {
> > - .flags = MXS_PHY_ABNORAML_IN_SUSPEND | MXS_PHY_SENDING_SOF_TOO_FAST,
> > + .flags = MXS_PHY_ABNORAML_IN_SUSPEND |
> > + MXS_PHY_SENDING_SOF_TOO_FAST |
> > + MXS_PHY_IMX23,
> > };
> >
> > static const struct mxs_phy_platform_flag imx6q_phy_data = {
> > .flags = MXS_PHY_SENDING_SOF_TOO_FAST |
> > MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS |
> > - MXS_PHY_FIX_ABNORAML_IN_SUSPEND,
> > + MXS_PHY_FIX_ABNORAML_IN_SUSPEND |
> > + MXS_PHY_IMX6Q,
> > };
> >
> > static const struct mxs_phy_platform_flag imx6sl_phy_data = {
> > .flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS |
> > MXS_PHY_FIX_ABNORAML_IN_SUSPEND |
> > - MXS_PHY_FIX_SENDING_SOF_TOO_FAST,
> > + MXS_PHY_FIX_SENDING_SOF_TOO_FAST |
> > + MXS_PHY_IMX6SL,
> > };
> >
> > static const struct of_device_id mxs_phy_dt_ids[] = {
> > @@ -210,6 +230,22 @@ static void mxs_phy_disconnect_line(struct mxs_phy *mxs_phy, bool on)
> > ? "disconnected" : "connected");
> > }
> >
> > +static void mxs_phy_enable_ldo_in_suspend(struct mxs_phy *mxs_phy, bool on)
> > +{
> > + unsigned int reg = on ? ANADIG_ANA_MISC0_SET : ANADIG_ANA_MISC0_CLR;
> > +
> > + /* If the SoCs don't have anatop, quit */
> > + if (!mxs_phy->regmap_anatop)
> > + return;
> > +
> > + if (mxs_phy->flags & MXS_PHY_IMX6Q)
> > + regmap_write(mxs_phy->regmap_anatop, reg,
> > + BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG);
> > + else if (mxs_phy->flags & MXS_PHY_IMX6SL)
> > + regmap_write(mxs_phy->regmap_anatop,
> > + reg, BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG_SL);
> > +}
> > +
> > static int mxs_phy_init(struct usb_phy *phy)
> > {
> > struct mxs_phy *mxs_phy = to_mxs_phy(phy);
> > @@ -395,6 +431,7 @@ static int mxs_phy_probe(struct platform_device *pdev)
> >
> > platform_set_drvdata(pdev, &mxs_phy->phy);
> >
> > + device_set_wakeup_capable(&pdev->dev, true);
> > ret = usb_add_phy_dev(&mxs_phy->phy);
> > if (ret)
> > return ret;
> > @@ -411,6 +448,28 @@ static int mxs_phy_remove(struct platform_device *pdev)
> > return 0;
> > }
> >
> > +static int mxs_phy_system_suspend(struct device *dev)
> > +{
> > + struct mxs_phy *mxs_phy = dev_get_drvdata(dev);
> > +
> > + if (device_may_wakeup(dev))
> > + mxs_phy_enable_ldo_in_suspend(mxs_phy, true);
> > +
> > + return 0;
> > +}
> > +
> > +static int mxs_phy_system_resume(struct device *dev)
> > +{
> > + struct mxs_phy *mxs_phy = dev_get_drvdata(dev);
> > +
> > + if (device_may_wakeup(dev))
> > + mxs_phy_enable_ldo_in_suspend(mxs_phy, false);
> > +
> > + return 0;
> > +}
> > +
> > +SIMPLE_DEV_PM_OPS(mxs_phy_pm, mxs_phy_system_suspend, mxs_phy_system_resume);
> > +
> > static struct platform_driver mxs_phy_driver = {
> > .probe = mxs_phy_probe,
> > .remove = mxs_phy_remove,
> > @@ -418,6 +477,7 @@ static struct platform_driver mxs_phy_driver = {
> > .name = DRIVER_NAME,
> > .owner = THIS_MODULE,
> > .of_match_table = mxs_phy_dt_ids,
> > + .pm = &mxs_phy_pm,
> > },
> > };
> >
> > --
> > 1.7.1
> >
> >
--
Best Regards,
Peter Chen
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
