[RFC PATCH V2 02/12] dt-bindings: misc: Tegra configuration settings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Config framework parses device tree and provides a list of register
settings with mask per mode to be applied by the controller.

Add binding document for config settings framework. Config settings
are defined as a property per field and have different modes per device.

Signed-off-by: Krishna Yarlagadda <kyarlagadda@xxxxxxxxxx>
---
 .../misc/nvidia,tegra-config-settings.yaml    | 62 +++++++++++++++++++
 MAINTAINERS                                   |  1 +
 2 files changed, 63 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/misc/nvidia,tegra-config-settings.yaml

diff --git a/Documentation/devicetree/bindings/misc/nvidia,tegra-config-settings.yaml b/Documentation/devicetree/bindings/misc/nvidia,tegra-config-settings.yaml
new file mode 100644
index 000000000000..4e5d52504c01
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/nvidia,tegra-config-settings.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/nvidia,tegra-config-settings.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Config properties for a device
+
+description:
+  Config setting is the configuration based on chip/board/system
+  characterization on interface/controller settings. This is needed for
+  - making the controller internal configuration to better perform
+  - making the interface to work proper by setting drive strength, slew
+    rates etc
+  - making the low power leakage.
+  There are two types of recommended configuration settings
+  - Controller register specific for internal operation of controller.
+  - Pad control/Pinmux/pincontrol registers for interfacing.
+  These configurations can further be categorized as static and dynamic.
+  - Static config does not change until a controller is reset.
+  - Dynamic config changes based on mode or condition, controller is
+    operating in.
+
+maintainers:
+  - Thierry Reding <thierry.reding@xxxxxxxxx>
+
+properties:
+  $nodename:
+    const: configsettings
+
+patternProperties:
+  "config-[a-z0-9_]+$":
+    description:
+      Config node representing properties of a device. Properties of
+      each device are listed under a unique subnode and referenced from
+      device node.
+    type: object
+    additionalProperties: false
+
+    patternProperties:
+      "^[a-z0-9_]+-cfg$":
+        description:
+          Config profiles applied conditionally.
+        type: object
+        patternProperties:
+	  "nvidia,[a-z0-9_]+$":
+	    description:
+	      Register field configuration.
+	    $ref: /schemas/types.yaml#/definitions/uint32
+
+additionalProperties: true
+
+examples:
+  - |
+    configsettings {
+        configi2c1: config-i2c3160000 {
+            i2c-common-cfg {
+                nvidia,i2c-hs-sclk-high-period = <0x03>;
+                nvidia,i2c-hs-sclk-low-period = <0x08>;
+            };
+        };
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index 8a60c98ac755..ac8410ed421f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -22260,6 +22260,7 @@ M:	Thierry Reding <thierry.reding@xxxxxxxxx>
 R:	Laxman Dewangan <ldewangan@xxxxxxxxxx>
 R:	Krishna Yarlagadda <kyarlagadda@xxxxxxxxxx>
 S:	Supported
+F:	Documentation/devicetree/bindings/misc/nvidia,tegra-config-settings.yaml
 F:	Documentation/misc-devices/tegra-cfg.rst
 
 TEGRA PWM DRIVER
-- 
2.43.2





[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux