On Tue, Oct 22, 2013 at 01:58:47PM +0800, Peter Chen wrote:
> When we need the PHY can be waken up by external signals,
> we can call this API. Besides, we call mxs_phy_disconnect_line
> at this API to close the connection between USB PHY and
> controller, after that, the line state from controller is SE0.
> Once the PHY is out of power, without calling mxs_phy_disconnect_line,
> there are unknown wakeups due to dp/dm floating at device mode.
>
> Signed-off-by: Peter Chen <peter.chen@xxxxxxxxxxxxx>
> ---
> drivers/usb/phy/phy-mxs-usb.c | 84 ++++++++++++++++++++++++++++++++++++++++-
> 1 files changed, 83 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
> index af2a9cf..5bd53ec 100644
> --- a/drivers/usb/phy/phy-mxs-usb.c
> +++ b/drivers/usb/phy/phy-mxs-usb.c
> @@ -31,6 +31,9 @@
> #define HW_USBPHY_CTRL_SET 0x34
> #define HW_USBPHY_CTRL_CLR 0x38
>
> +#define HW_USBPHY_DEBUG_SET 0x54
> +#define HW_USBPHY_DEBUG_CLR 0x58
> +
> #define HW_USBPHY_IP 0x90
> #define HW_USBPHY_IP_SET 0x94
> #define HW_USBPHY_IP_CLR 0x98
> @@ -39,6 +42,9 @@
> #define BM_USBPHY_CTRL_CLKGATE BIT(30)
> #define BM_USBPHY_CTRL_ENAUTOSET_USBCLKS BIT(26)
> #define BM_USBPHY_CTRL_ENAUTOCLR_USBCLKGATE BIT(25)
> +#define BM_USBPHY_CTRL_ENVBUSCHG_WKUP BIT(23)
> +#define BM_USBPHY_CTRL_ENIDCHG_WKUP BIT(22)
> +#define BM_USBPHY_CTRL_ENDPDMCHG_WKUP BIT(21)
> #define BM_USBPHY_CTRL_ENAUTOCLR_PHY_PWD BIT(20)
> #define BM_USBPHY_CTRL_ENAUTOCLR_CLKGATE BIT(19)
> #define BM_USBPHY_CTRL_ENAUTO_PWRON_PLL BIT(18)
> @@ -46,7 +52,20 @@
> #define BM_USBPHY_CTRL_ENUTMILEVEL2 BIT(14)
> #define BM_USBPHY_CTRL_ENHOSTDISCONDETECT BIT(1)
>
> -#define BM_USBPHY_IP_FIX (BIT(17) | BIT(18))
> +#define BM_USBPHY_IP_FIX (BIT(17) | BIT(18))
> +
> +#define BM_USBPHY_DEBUG_CLKGATE BIT(30)
> +
> +/* Anatop Registers */
> +#define ANADIG_USB1_VBUS_DET_STAT 0x1c0
> +
> +#define ANADIG_USB1_LOOPBACK_SET 0x1e4
> +#define ANADIG_USB1_LOOPBACK_CLR 0x1e8
> +
> +#define BM_ANADIG_USB1_VBUS_DET_STAT_VBUS_VALID BIT(3)
> +
> +#define BM_ANADIG_USB1_LOOPBACK_UTMI_DIG_TST1 BIT(2)
> +#define BM_ANADIG_USB1_LOOPBACK_TSTI_TX_EN BIT(5)
>
> #define to_mxs_phy(p) container_of((p), struct mxs_phy, phy)
>
> @@ -61,6 +80,7 @@ struct mxs_phy {
> struct clk *clk;
> enum imx_phy_type devtype;
> struct regmap *regmap_anatop;
> + bool disconnect_line_without_vbus_is_needed;
> };
>
> static inline int is_mx6q_phy(struct mxs_phy *data)
> @@ -134,6 +154,44 @@ static int mxs_phy_hw_init(struct mxs_phy *mxs_phy)
> return 0;
> }
>
> +static void mxs_phy_disconnect_line(struct mxs_phy *mxs_phy, bool on)
> +{
> + void __iomem *base = mxs_phy->phy.io_priv;
> + bool vbus_is_on = false;
> + static bool line_is_disconnected;
> + unsigned int vbus_value = 0;
> +
> + /* Only the SoCs have anatop need below operation */
> + if (!mxs_phy->disconnect_line_without_vbus_is_needed)
> + return;
As per the comment, shouldn't the if-clause be the following? Or is the
comment incorrect?
if (!mxs_phy->regmap_anatop)
Shawn
> +
> + regmap_read(mxs_phy->regmap_anatop, ANADIG_USB1_VBUS_DET_STAT,
> + &vbus_value);
> + if (vbus_value & BM_ANADIG_USB1_VBUS_DET_STAT_VBUS_VALID)
> + vbus_is_on = true;
> +
> + if (on && !vbus_is_on) {
> + writel_relaxed(BM_USBPHY_DEBUG_CLKGATE,
> + base + HW_USBPHY_DEBUG_CLR);
> + regmap_write(mxs_phy->regmap_anatop, ANADIG_USB1_LOOPBACK_SET,
> + BM_ANADIG_USB1_LOOPBACK_UTMI_DIG_TST1 |
> + BM_ANADIG_USB1_LOOPBACK_TSTI_TX_EN);
> + /* Delay some time, and let Linestate be SE0 for controller */
> + usleep_range(500, 1000);
> + line_is_disconnected = true;
> + } else if (line_is_disconnected) {
> + regmap_write(mxs_phy->regmap_anatop, ANADIG_USB1_LOOPBACK_CLR,
> + BM_ANADIG_USB1_LOOPBACK_UTMI_DIG_TST1 |
> + BM_ANADIG_USB1_LOOPBACK_TSTI_TX_EN);
> + writel_relaxed(BM_USBPHY_DEBUG_CLKGATE,
> + base + HW_USBPHY_DEBUG_SET);
> + line_is_disconnected = false;
> + }
> +
> + dev_dbg(mxs_phy->phy.dev, "line is %s\n", line_is_disconnected
> + ? "disconnected" : "connected");
> +}
> +
> static int mxs_phy_init(struct usb_phy *phy)
> {
> struct mxs_phy *mxs_phy = to_mxs_phy(phy);
> @@ -171,6 +229,23 @@ static int mxs_phy_suspend(struct usb_phy *x, int suspend)
> return 0;
> }
>
> +static int mxs_phy_set_wakeup(struct usb_phy *x, bool enabled)
> +{
> + struct mxs_phy *mxs_phy = to_mxs_phy(x);
> + u32 value = BM_USBPHY_CTRL_ENVBUSCHG_WKUP |
> + BM_USBPHY_CTRL_ENDPDMCHG_WKUP |
> + BM_USBPHY_CTRL_ENIDCHG_WKUP;
> + if (enabled) {
> + mxs_phy_disconnect_line(mxs_phy, true);
> + writel_relaxed(value, x->io_priv + HW_USBPHY_CTRL_SET);
> + } else {
> + writel_relaxed(value, x->io_priv + HW_USBPHY_CTRL_CLR);
> + mxs_phy_disconnect_line(mxs_phy, false);
> + }
> +
> + return 0;
> +}
> +
> static int mxs_phy_on_connect(struct usb_phy *phy,
> enum usb_device_speed speed)
> {
> @@ -289,6 +364,7 @@ static int mxs_phy_probe(struct platform_device *pdev)
> const struct of_device_id *of_id =
> of_match_device(mxs_phy_dt_ids, &pdev->dev);
> struct device_node *np = pdev->dev.of_node;
> + struct property *disconnect_property;
>
> /* This driver is DT-only version now */
> if (!of_id || !np)
> @@ -325,6 +401,11 @@ static int mxs_phy_probe(struct platform_device *pdev)
> }
> }
>
> + disconnect_property = of_find_property
> + (np, "disconnect-line-without-vbus", NULL);
> + if (disconnect_property && mxs_phy->regmap_anatop)
> + mxs_phy->disconnect_line_without_vbus_is_needed = true;
> +
> mxs_phy->phy.io_priv = base;
> mxs_phy->phy.dev = &pdev->dev;
> mxs_phy->phy.label = DRIVER_NAME;
> @@ -334,6 +415,7 @@ static int mxs_phy_probe(struct platform_device *pdev)
> mxs_phy->phy.notify_connect = mxs_phy_on_connect;
> mxs_phy->phy.notify_disconnect = mxs_phy_on_disconnect;
> mxs_phy->phy.type = USB_PHY_TYPE_USB2;
> + mxs_phy->phy.set_wakeup = mxs_phy_set_wakeup;
>
> ATOMIC_INIT_NOTIFIER_HEAD(&mxs_phy->phy.notifier);
>
> --
> 1.7.1
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
