Re: [PATCH net-next v6 11/17] dt-bindings: net: pse-pd: Add another way of describing several PSE PIs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 26 Mar 2024 15:04:48 +0100, Kory Maincent wrote:
> From: Kory Maincent (Dent Project) <kory.maincent@xxxxxxxxxxx>
> 
> PSE PI setup may encompass multiple PSE controllers or auxiliary circuits
> that collectively manage power delivery to one Ethernet port.
> Such configurations might support a range of PoE standards and require
> the capability to dynamically configure power delivery based on the
> operational mode (e.g., PoE2 versus PoE4) or specific requirements of
> connected devices. In these instances, a dedicated PSE PI node becomes
> essential for accurately documenting the system architecture. This node
> would serve to detail the interactions between different PSE controllers,
> the support for various PoE modes, and any additional logic required to
> coordinate power delivery across the network infrastructure.
> 
> The old usage of "#pse-cells" is unsuficient as it carries only the PSE PI
> index information.
> 
> Signed-off-by: Kory Maincent <kory.maincent@xxxxxxxxxxx>
> ---
> 
> Changes in v3:
> - New patch
> 
> Changes in v4:
> - Remove $def
> - Fix pairset-names item list
> - Upgrade few properties description
> - Update the commit message
> 
> Changes in v5:
> - Fix yamllint error.
> - Replace underscore by dash in properties names.
> - Add polarity-supported property.
> 
> Changes in v6:
> - Reorder the pairset pinout table documentation to shrink the lines size.
> - Remove pairset and polarity as required fields.
> - Add vpwr-supply regulator supply.
> ---
>  .../bindings/net/pse-pd/pse-controller.yaml        | 102 ++++++++++++++++++++-
>  1 file changed, 99 insertions(+), 3 deletions(-)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:


doc reference errors (make refcheckdocs):
Warning: Documentation/devicetree/bindings/net/pse-pd/pse-controller.yaml references a file that doesn't exist: Documentation/networking/pse-pd/pse-pi.rst
Documentation/devicetree/bindings/net/pse-pd/pse-controller.yaml: Documentation/networking/pse-pd/pse-pi.rst

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240326-feature_poe-v6-11-c1011b6ea1cb@xxxxxxxxxxx

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.





[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux