Hi Andrew, Thanks for reviewing the patches. On 06/03/24 6:53 pm, Andrew Lunn wrote: > EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe > >> +NORX (Bit 29) - No Receive flag. The SPI host may set this bit to prevent >> + the MAC-PHY from conveying RX data on the MISO for the >> + current chunk (DV = 0 in the footer), indicating that the >> + host would not process it. Typically, the SPI host should >> + set NORX = 0 indicating that it will accept and process >> + any receive frame data within the current chunk. >> + >> +RSVD (Bit 28..24) - Reserved: All reserved bits shall be ‘0’. >> + >> +VS (Bit 23..22) - Vendor Specific. These bits are implementation specific. >> + If the MAC-PHY does not implement these bits, the host >> + shall set them to ‘0’. >> + >> +DV (Bit 21) - Data Valid flag. The SPI host uses this bit to indicate >> + whether the current chunk contains valid transmit frame data >> + (DV = 1) or not (DV = 0). When ‘0’, the MAC-PHY ignores the >> + chunk payload. Note that the receive path is unaffected by >> + the setting of the DV bit in the data header. > > There is some odd indentation going on here. Maybe tab vs spaces? Yes, there is a mixture of tab and spaces. I will correct this indentation in the next version. > > Otherwise, this is nice documentation. Thanks. Thanks. Best regards, Parthiban V > > Andrew
