This patch series contain the below updates, - Adds support for OPEN Alliance 10BASE-T1x MACPHY Serial Interface in the net/ethernet/oa_tc6.c. Link to the spec: ----------------- https://opensig.org/download/document/OPEN_Alliance_10BASET1x_MAC-PHY_Serial_Interface_V1.1.pdf - Adds driver support for Microchip LAN8650/1 Rev.B1 10BASE-T1S MACPHY Ethernet driver in the net/ethernet/microchip/lan865x/lan865x.c. Link to the product: -------------------- https://www.microchip.com/en-us/product/lan8650 Testing Details: ---------------- The driver performance was tested using iperf3 in the below two setups separately. Setup 1: -------- Node 0 - Raspberry Pi 4 with LAN8650 MAC-PHY Node 1 - Raspberry Pi 4 with EVB-LAN8670-USB USB Stick Setup 2: -------- Node 0 - SAMA7G54-EK with LAN8650 MAC-PHY Node 1 - Raspberry Pi 4 with EVB-LAN8670-USB USB Stick Achieved maximum of 9.4 Mbps. Some systems like Raspberry Pi 4 need performance mode enabled to get the proper clock speed for SPI. Refer below link for more details. https://github.com/raspberrypi/linux/issues/3381#issuecomment-1144723750 Changes: v2: - Removed RFC tag. - OA TC6 framework configured in the Kconfig and Makefile to compile as a module. - Kerneldoc headers added for all the API methods exposed to MAC driver. - Odd parity calculation logic updated from the below link, https://elixir.bootlin.com/linux/latest/source/lib/bch.c#L348 - Control buffer memory allocation moved to the initial function. - struct oa_tc6 implemented as an obaque structure. - Removed kthread for handling mac-phy interrupt instead threaded irq is used. - Removed interrupt implementation for soft reset handling instead of that polling has been implemented. - Registers name in the defines changed according to the specification document. - Registers defines are arranged in the order of offset and followed by register fields. - oa_tc6_write_register() implemented for writing a single register and oa_tc6_write_registers() implemented for writing multiple registers. - oa_tc6_read_register() implemented for reading a single register and oa_tc6_read_registers() implemented for reading multiple registers. - Removed DRV_VERSION macro as git hash provided by ethtool. - Moved MDIO bus registration and PHY initialization to the OA TC6 lib. - Replaced lan865x_set/get_link_ksettings() functions with phy_ethtool_ksettings_set/get() functions. - MAC-PHY's standard capability register values checked against the user configured values. - Removed unnecessary parameters validity check in various places. - Removed MAC address configuration in the lan865x_net_open() function as it is done in the lan865x_probe() function already. - Moved standard registers and proprietary vendor registers to the respective files. - Added proper subject prefixes for the DT bindings. - Moved OA specific properties to a separate DT bindings and corrected the types & mistakes in the DT bindings. - Inherited OA specific DT bindings to the LAN865x specific DT bindings. - Removed sparse warnings in all the places. - Used net_err_ratelimited() for printing the error messages. - oa_tc6_process_rx_chunks() function and the content of oa_tc6_handler() function are split into small functions. - Used proper macros provided by network layer for calculating the MAX_ETH_LEN. - Return value of netif_rx() function handled properly. - Removed unnecessary NULL initialization of skb in the oa_tc6_rx_eth_ready() function removed. - Local variables declaration ordered in reverse xmas tree notation. v3: - Completely redesigned all the patches. - Control and data interface patches are divided into multiple small patches. - Device driver APIs added in the oa-tc6-framework.rst file. - Code readability improved in all the patches. - Defined macros wherever is possible. - Changed RESETC to STATUS0_RESETC for improving the readability. - Removed OA specific DT bindings. - Used default configurations defined in the OA spec. - All variables are named properly as per OA spec for more redability. - Bigger functions are split into multiple smaller functions. - DT binding check is done. - Phy mask is removed in phy scanning. - Used NET_RX_DROP to compare the rx packet submission status. - Indentation in the Kconfig file corrected. - Removed CONFIG_OF and CONFIG_ACPI ifdefs. - Removed MODULE_ALIAS(). Parthiban Veerasooran (12): Documentation: networking: add OPEN Alliance 10BASE-T1x MAC-PHY serial interface net: ethernet: oa_tc6: implement register write operation net: ethernet: oa_tc6: implement register read operation net: ethernet: oa_tc6: implement software reset net: ethernet: oa_tc6: implement error interrupts unmasking net: ethernet: oa_tc6: implement internal PHY initialization net: ethernet: oa_tc6: enable open alliance tc6 data communication net: ethernet: oa_tc6: implement transmit path to transfer tx ethernet frames net: ethernet: oa_tc6: implement receive path to receive rx ethernet frames net: ethernet: oa_tc6: implement mac-phy interrupt microchip: lan865x: add driver support for Microchip's LAN865X MAC-PHY dt-bindings: net: add Microchip's LAN865X 10BASE-T1S MACPHY .../bindings/net/microchip,lan865x.yaml | 80 ++ Documentation/networking/oa-tc6-framework.rst | 491 +++++++ MAINTAINERS | 15 + drivers/net/ethernet/Kconfig | 15 + drivers/net/ethernet/Makefile | 1 + drivers/net/ethernet/microchip/Kconfig | 1 + drivers/net/ethernet/microchip/Makefile | 1 + .../net/ethernet/microchip/lan865x/Kconfig | 19 + .../net/ethernet/microchip/lan865x/Makefile | 6 + .../net/ethernet/microchip/lan865x/lan865x.c | 350 +++++ drivers/net/ethernet/oa_tc6.c | 1235 +++++++++++++++++ include/linux/oa_tc6.h | 23 + 12 files changed, 2237 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/microchip,lan865x.yaml create mode 100644 Documentation/networking/oa-tc6-framework.rst create mode 100644 drivers/net/ethernet/microchip/lan865x/Kconfig create mode 100644 drivers/net/ethernet/microchip/lan865x/Makefile create mode 100644 drivers/net/ethernet/microchip/lan865x/lan865x.c create mode 100644 drivers/net/ethernet/oa_tc6.c create mode 100644 include/linux/oa_tc6.h -- 2.34.1
