The ams AS3722 is a compact system PMU suitable for mobile phones,
tablets etc. It has 4 DC/DC step-down regulators, 3 DC/DC step-down
controller, 11 LDOs, RTC, automatic battery, temperature and
over-current monitoring, 8 GPIOs, ADC and a watchdog.
Add MFD core driver for the AS3722 to support core functionality.
Signed-off-by: Laxman Dewangan <ldewangan@xxxxxxxxxx>
Signed-off-by: Florian Lobmaier <florian.lobmaier@xxxxxxx>
---
Changes from V1:
- Remove compatible string from DT for subnode.
- Nit cleanups in driver and use module_i2c_driver
Changes from V2:
- Change DT file to reflect the changes in gpio/pincntrl driver.
Now there is no extra subnode.
Changes from V3:
- Combine DT of pincontrol and regulator to mfd.
- Nits cleanups.
- AMS to ams.
Documentation/devicetree/bindings/mfd/as3722.txt | 174 +++++++++
drivers/mfd/Kconfig | 12 +
drivers/mfd/Makefile | 1 +
drivers/mfd/as3722.c | 449 ++++++++++++++++++++++
include/linux/mfd/as3722.h | 423 ++++++++++++++++++++
5 files changed, 1059 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mfd/as3722.txt
create mode 100644 drivers/mfd/as3722.c
create mode 100644 include/linux/mfd/as3722.h
diff --git a/Documentation/devicetree/bindings/mfd/as3722.txt b/Documentation/devicetree/bindings/mfd/as3722.txt
new file mode 100644
index 0000000..885ca4c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/as3722.txt
@@ -0,0 +1,174 @@
+* ams AS3722 Power management IC.
+
+Required properties:
+-------------------
+- compatible: Must be "ams,as3722".
+- reg: I2C device address.
+- interrupt-controller: AS3722 has internal interrupt controller which takes the
+ interrupt request from internal sub-blocks like RTC, regulators, GPIOs as well
+ as external input.
+- #interrupt-cells: Should be set to 2 for IRQ number and flags.
+ The first cell is the IRQ number.
+ The second cell is the flags, encoded as the trigger masks from binding document
+ interrupts.txt, using dt-bindings/irq.
+
+Optional submodule and their properties:
+---------------------------------------
+
+Pinmux and GPIO:
+---------------
+Device has 8 GPIO pins which can be configured as GPIO as well as the special IO
+functions.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+Following are properties which is needed if GPIO and pinmux functionality
+is required:
+- gpio-controller: Marks the device node as a GPIO controller.
+- #gpio-cells: Number of GPIO cells. Refer to binding document gpio/gpio.txt
+- pinctrl-names: A pinctrl state named "default" must be defined, using the
+ bindings in pinctrl/pinctrl-binding.txt.
+- pinctrl[0...n]: Nodes for pin control to represents state 0 to state n.
+ Each of these nodes contains different subnodes to represents
+ some desired configuration for a list of pins. This configuration can
+ include the mux function to select on those pin(s), and various pin
+ configuration parameters, such as pull-up, open drain.
+
+Each subnode have following properties:
+Required properties:
+ pins: List of pins. Valid options for pins properties are
+ gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7
+
+Optional properties:
+ Optional properties are
+ function, bias-disable, bias-pull-up, bias-pull-down,
+ bias-high-impedance, drive-open-drain.
+
+ Valid options for funtion properties are:
+ gpio, interrupt-out, gpio-in-interrupt,
+ vsup-vbat-low-undebounce-out, vsup-vbat-low-debounce-out,
+ voltage-in-standby, oc-pg-sd0, oc-pg-sd6, powergood-out,
+ pwm-in, pwm-out, clk32k-out, watchdog-in, soft-reset-in
+
+Regulators:
+-----------
+Device has multiple DCDC and LDOs. The node "regulators" is require if regulator
+functionality is needed.
+
+Following are properties of regulator subnode.
+
+Optional properties:
+-------------------
+The input supply of regulators are the optional properties on the
+regulator node. The input supply of these regulators are provided
+through following properties:
+vsup-sd2-supply: Input supply for SD2.
+vsup-sd3-supply: Input supply for SD3.
+vsup-sd4-supply: Input supply for SD4.
+vsup-sd5-supply: Input supply for SD5.
+vin-ldo0-supply: Input supply for LDO0.
+vin-ldo1-6-supply: Input supply for LDO1 and LDO6.
+vin-ldo2-5-7-supply: Input supply for LDO2, LDO5 and LDO7.
+vin-ldo3-4-supply: Input supply for LDO3 and LDO4.
+vin-ldo9-10-supply: Input supply for LDO9 and LDO10.
+vin-ldo11-supply: Input supply for LDO11.
+
+Optional sub nodes:
+-----------------
+ The subnodes name is the name of regulator and it must be one of:
+ sd[0-6], ldo[0-7], ldo[9-11]
+
+ Each sub-node should contain the constraints and initialization
+ information for that regulator. See regulator.txt for a description
+ of standard properties for these sub-nodes.
+ Additional custom properties are listed below.
+ ams,ext-control: External control of the rail. The option of
+ this properties will tell which external input is
+ controlling this rail. Valid values are 0, 1, 2 ad 3.
+ 0: There is no external control of this rail.
+ 1: Rail is controlled by ENABLE1 input pin.
+ 2: Rail is controlled by ENABLE2 input pin.
+ 3: Rail is controlled by ENABLE3 input pin.
+ ams,enable-tracking: Enable tracking with SD1, only supported
+ by LDO3.
+
+Example:
+--------
+ams3722 {
+ compatible = "ams,as3722";
+ reg = <0x48>;
+
+ interrupt-parent = <&intc>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&as3722_default>;
+
+ as3722_default: pinmux {
+ gpio0 {
+ pins = "gpio0";
+ function = "gpio";
+ bias-pull-down;
+ };
+
+ gpio1_2_4_7 {
+ pins = "gpio1", "gpio2", "gpio4", "gpio7";
+ function = "gpio";
+ bias-pull-up;
+ };
+
+ gpio5 {
+ pins = "gpio5";
+ function = "clk32k_out";
+ };
+ }
+
+ regulators {
+ vsup-sd2-supply = <...>;
+ ...
+
+ sd0 {
+ regulator-name = "vdd_cpu";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ ams,ext-control = <2>;
+ };
+
+ sd1 {
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ ams,ext-control = <1>;
+ };
+
+ sd2 {
+ regulator-name = "vddio_ddr";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ };
+
+ sd4 {
+ regulator-name = "avdd-hdmi-pex";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-always-on;
+ };
+
+ sd5 {
+ regulator-name = "vdd-1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+ ....
+ };
+};
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index d078fe4..b7c74a7 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -27,6 +27,18 @@ config MFD_AS3711
help
Support for the AS3711 PMIC from AMS
+config MFD_AS3722
+ bool "ams AS3722 Power Management IC"
+ select MFD_CORE
+ select REGMAP_I2C
+ select REGMAP_IRQ
+ depends on I2C && OF
+ help
+ The ams AS3722 is a compact system PMU suitable for mobile phones,
+ tablets etc. It has 4 DC/DC step-down regulators, 3 DC/DC step-down
+ controllers, 11 LDOs, RTC, automatic battery, temperature and
+ over current monitoring, GPIOs, ADC and a watchdog.
+
config PMIC_ADP5520
bool "Analog Devices ADP5520/01 MFD PMIC Core Support"
depends on I2C=y
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 656cec9..8a28dc9 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -162,4 +162,5 @@ obj-$(CONFIG_MFD_LM3533) += lm3533-core.o lm3533-ctrlbank.o
obj-$(CONFIG_VEXPRESS_CONFIG) += vexpress-config.o vexpress-sysreg.o
obj-$(CONFIG_MFD_RETU) += retu-mfd.o
obj-$(CONFIG_MFD_AS3711) += as3711.o
+obj-$(CONFIG_MFD_AS3722) += as3722.o
obj-$(CONFIG_MFD_STW481X) += stw481x.o
diff --git a/drivers/mfd/as3722.c b/drivers/mfd/as3722.c
new file mode 100644
index 0000000..cd8ee59
--- /dev/null
+++ b/drivers/mfd/as3722.c
@@ -0,0 +1,449 @@
+/*
+ * Core driver for ams AS3722 PMICs
+ *
+ * Copyright (C) 2013 AMS AG
+ * Copyright (c) 2013, NVIDIA Corporation. All rights reserved.
+ *
+ * Author: Florian Lobmaier <florian.lobmaier@xxxxxxx>
+ * Author: Laxman Dewangan <ldewangan@xxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/as3722.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#define AS3722_DEVICE_ID 0x0C
+
+static const struct resource as3722_rtc_resource[] = {
+ {
+ .name = "as3722-rtc-alarm",
+ .start = AS3722_IRQ_RTC_ALARM,
+ .end = AS3722_IRQ_RTC_ALARM,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static const struct resource as3722_adc_resource[] = {
+ {
+ .name = "as3722-adc",
+ .start = AS3722_IRQ_ADC,
+ .end = AS3722_IRQ_ADC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct mfd_cell as3722_devs[] = {
+ {
+ .name = "as3722-pinctrl",
+ },
+ {
+ .name = "as3722-regulator",
+ },
+ {
+ .name = "as3722-rtc",
+ .num_resources = ARRAY_SIZE(as3722_rtc_resource),
+ .resources = as3722_rtc_resource,
+ },
+ {
+ .name = "as3722-adc",
+ .num_resources = ARRAY_SIZE(as3722_adc_resource),
+ .resources = as3722_adc_resource,
+ },
+ {
+ .name = "as3722-power-off",
+ },
+};
+
+static const struct regmap_irq as3722_irqs[] = {
+ /* INT1 IRQs */
+ [AS3722_IRQ_LID] = {
+ .mask = AS3722_INTERRUPT_MASK1_LID,
+ },
+ [AS3722_IRQ_ACOK] = {
+ .mask = AS3722_INTERRUPT_MASK1_ACOK,
+ },
+ [AS3722_IRQ_ENABLE1] = {
+ .mask = AS3722_INTERRUPT_MASK1_ENABLE1,
+ },
+ [AS3722_IRQ_OCCUR_ALARM_SD0] = {
+ .mask = AS3722_INTERRUPT_MASK1_OCURR_ALARM_SD0,
+ },
+ [AS3722_IRQ_ONKEY_LONG_PRESS] = {
+ .mask = AS3722_INTERRUPT_MASK1_ONKEY_LONG,
+ },
+ [AS3722_IRQ_ONKEY] = {
+ .mask = AS3722_INTERRUPT_MASK1_ONKEY,
+ },
+ [AS3722_IRQ_OVTMP] = {
+ .mask = AS3722_INTERRUPT_MASK1_OVTMP,
+ },
+ [AS3722_IRQ_LOWBAT] = {
+ .mask = AS3722_INTERRUPT_MASK1_LOWBAT,
+ },
+
+ /* INT2 IRQs */
+ [AS3722_IRQ_SD0_LV] = {
+ .mask = AS3722_INTERRUPT_MASK2_SD0_LV,
+ .reg_offset = 1,
+ },
+ [AS3722_IRQ_SD1_LV] = {
+ .mask = AS3722_INTERRUPT_MASK2_SD1_LV,
+ .reg_offset = 1,
+ },
+ [AS3722_IRQ_SD2_LV] = {
+ .mask = AS3722_INTERRUPT_MASK2_SD2345_LV,
+ .reg_offset = 1,
+ },
+ [AS3722_IRQ_PWM1_OV_PROT] = {
+ .mask = AS3722_INTERRUPT_MASK2_PWM1_OV_PROT,
+ .reg_offset = 1,
+ },
+ [AS3722_IRQ_PWM2_OV_PROT] = {
+ .mask = AS3722_INTERRUPT_MASK2_PWM2_OV_PROT,
+ .reg_offset = 1,
+ },
+ [AS3722_IRQ_ENABLE2] = {
+ .mask = AS3722_INTERRUPT_MASK2_ENABLE2,
+ .reg_offset = 1,
+ },
+ [AS3722_IRQ_SD6_LV] = {
+ .mask = AS3722_INTERRUPT_MASK2_SD6_LV,
+ .reg_offset = 1,
+ },
+ [AS3722_IRQ_RTC_REP] = {
+ .mask = AS3722_INTERRUPT_MASK2_RTC_REP,
+ .reg_offset = 1,
+ },
+
+ /* INT3 IRQs */
+ [AS3722_IRQ_RTC_ALARM] = {
+ .mask = AS3722_INTERRUPT_MASK3_RTC_ALARM,
+ .reg_offset = 2,
+ },
+ [AS3722_IRQ_GPIO1] = {
+ .mask = AS3722_INTERRUPT_MASK3_GPIO1,
+ .reg_offset = 2,
+ },
+ [AS3722_IRQ_GPIO2] = {
+ .mask = AS3722_INTERRUPT_MASK3_GPIO2,
+ .reg_offset = 2,
+ },
+ [AS3722_IRQ_GPIO3] = {
+ .mask = AS3722_INTERRUPT_MASK3_GPIO3,
+ .reg_offset = 2,
+ },
+ [AS3722_IRQ_GPIO4] = {
+ .mask = AS3722_INTERRUPT_MASK3_GPIO4,
+ .reg_offset = 2,
+ },
+ [AS3722_IRQ_GPIO5] = {
+ .mask = AS3722_INTERRUPT_MASK3_GPIO5,
+ .reg_offset = 2,
+ },
+ [AS3722_IRQ_WATCHDOG] = {
+ .mask = AS3722_INTERRUPT_MASK3_WATCHDOG,
+ .reg_offset = 2,
+ },
+ [AS3722_IRQ_ENABLE3] = {
+ .mask = AS3722_INTERRUPT_MASK3_ENABLE3,
+ .reg_offset = 2,
+ },
+
+ /* INT4 IRQs */
+ [AS3722_IRQ_TEMP_SD0_SHUTDOWN] = {
+ .mask = AS3722_INTERRUPT_MASK4_TEMP_SD0_SHUTDOWN,
+ .reg_offset = 3,
+ },
+ [AS3722_IRQ_TEMP_SD1_SHUTDOWN] = {
+ .mask = AS3722_INTERRUPT_MASK4_TEMP_SD1_SHUTDOWN,
+ .reg_offset = 3,
+ },
+ [AS3722_IRQ_TEMP_SD2_SHUTDOWN] = {
+ .mask = AS3722_INTERRUPT_MASK4_TEMP_SD6_SHUTDOWN,
+ .reg_offset = 3,
+ },
+ [AS3722_IRQ_TEMP_SD0_ALARM] = {
+ .mask = AS3722_INTERRUPT_MASK4_TEMP_SD0_ALARM,
+ .reg_offset = 3,
+ },
+ [AS3722_IRQ_TEMP_SD1_ALARM] = {
+ .mask = AS3722_INTERRUPT_MASK4_TEMP_SD1_ALARM,
+ .reg_offset = 3,
+ },
+ [AS3722_IRQ_TEMP_SD6_ALARM] = {
+ .mask = AS3722_INTERRUPT_MASK4_TEMP_SD6_ALARM,
+ .reg_offset = 3,
+ },
+ [AS3722_IRQ_OCCUR_ALARM_SD6] = {
+ .mask = AS3722_INTERRUPT_MASK4_OCCUR_ALARM_SD6,
+ .reg_offset = 3,
+ },
+ [AS3722_IRQ_ADC] = {
+ .mask = AS3722_INTERRUPT_MASK4_ADC,
+ .reg_offset = 3,
+ },
+};
+
+static const struct regmap_irq_chip as3722_irq_chip = {
+ .name = "as3722",
+ .irqs = as3722_irqs,
+ .num_irqs = ARRAY_SIZE(as3722_irqs),
+ .num_regs = 4,
+ .status_base = AS3722_INTERRUPT_STATUS1_REG,
+ .mask_base = AS3722_INTERRUPT_MASK1_REG,
+};
+
+static int as3722_check_device_id(struct as3722 *as3722)
+{
+ u32 val;
+ int ret;
+
+ /* Check that this is actually a AS3722 */
+ ret = as3722_read(as3722, AS3722_ASIC_ID1_REG, &val);
+ if (ret < 0) {
+ dev_err(as3722->dev, "ASIC_ID1 read failed: %d\n", ret);
+ return ret;
+ }
+
+ if (val != AS3722_DEVICE_ID) {
+ dev_err(as3722->dev, "Device is not AS3722, ID is 0x%x\n", val);
+ return -ENODEV;
+ }
+
+ ret = as3722_read(as3722, AS3722_ASIC_ID2_REG, &val);
+ if (ret < 0) {
+ dev_err(as3722->dev, "ASIC_ID2 read failed: %d\n", ret);
+ return ret;
+ }
+
+ dev_info(as3722->dev, "AS3722 with revision 0x%x found\n", val);
+ return 0;
+}
+
+static int as3722_configure_pullups(struct as3722 *as3722)
+{
+ int ret;
+ u32 val = 0;
+
+ if (as3722->en_intern_int_pullup)
+ val |= AS3722_INT_PULL_UP;
+ if (as3722->en_intern_i2c_pullup)
+ val |= AS3722_I2C_PULL_UP;
+
+ ret = as3722_update_bits(as3722, AS3722_IOVOLTAGE_REG,
+ AS3722_INT_PULL_UP | AS3722_I2C_PULL_UP, val);
+ if (ret < 0)
+ dev_err(as3722->dev, "IOVOLTAGE_REG update failed: %d\n", ret);
+ return ret;
+}
+
+static const struct regmap_range as3722_readable_ranges[] = {
+ regmap_reg_range(AS3722_SD0_VOLTAGE_REG, AS3722_SD6_VOLTAGE_REG),
+ regmap_reg_range(AS3722_GPIO0_CONTROL_REG, AS3722_LDO7_VOLTAGE_REG),
+ regmap_reg_range(AS3722_LDO9_VOLTAGE_REG, AS3722_REG_SEQU_MOD3_REG),
+ regmap_reg_range(AS3722_SD_PHSW_CTRL_REG, AS3722_PWM_CONTROL_H_REG),
+ regmap_reg_range(AS3722_WATCHDOG_TIMER_REG, AS3722_WATCHDOG_TIMER_REG),
+ regmap_reg_range(AS3722_WATCHDOG_SOFTWARE_SIGNAL_REG,
+ AS3722_BATTERY_VOLTAGE_MONITOR2_REG),
+ regmap_reg_range(AS3722_SD_CONTROL_REG, AS3722_PWM_VCONTROL4_REG),
+ regmap_reg_range(AS3722_BB_CHARGER_REG, AS3722_SRAM_REG),
+ regmap_reg_range(AS3722_RTC_ACCESS_REG, AS3722_RTC_ACCESS_REG),
+ regmap_reg_range(AS3722_RTC_STATUS_REG, AS3722_TEMP_STATUS_REG),
+ regmap_reg_range(AS3722_ADC0_CONTROL_REG, AS3722_ADC_CONFIGURATION_REG),
+ regmap_reg_range(AS3722_ASIC_ID1_REG, AS3722_ASIC_ID2_REG),
+ regmap_reg_range(AS3722_LOCK_REG, AS3722_LOCK_REG),
+};
+
+static const struct regmap_access_table as3722_readable_table = {
+ .yes_ranges = as3722_readable_ranges,
+ .n_yes_ranges = ARRAY_SIZE(as3722_readable_ranges),
+};
+
+static const struct regmap_range as3722_writable_ranges[] = {
+ regmap_reg_range(AS3722_SD0_VOLTAGE_REG, AS3722_SD6_VOLTAGE_REG),
+ regmap_reg_range(AS3722_GPIO0_CONTROL_REG, AS3722_LDO7_VOLTAGE_REG),
+ regmap_reg_range(AS3722_LDO9_VOLTAGE_REG, AS3722_GPIO_SIGNAL_OUT_REG),
+ regmap_reg_range(AS3722_REG_SEQU_MOD1_REG, AS3722_REG_SEQU_MOD3_REG),
+ regmap_reg_range(AS3722_SD_PHSW_CTRL_REG, AS3722_PWM_CONTROL_H_REG),
+ regmap_reg_range(AS3722_WATCHDOG_TIMER_REG, AS3722_WATCHDOG_TIMER_REG),
+ regmap_reg_range(AS3722_WATCHDOG_SOFTWARE_SIGNAL_REG,
+ AS3722_BATTERY_VOLTAGE_MONITOR2_REG),
+ regmap_reg_range(AS3722_SD_CONTROL_REG, AS3722_PWM_VCONTROL4_REG),
+ regmap_reg_range(AS3722_BB_CHARGER_REG, AS3722_SRAM_REG),
+ regmap_reg_range(AS3722_INTERRUPT_MASK1_REG, AS3722_TEMP_STATUS_REG),
+ regmap_reg_range(AS3722_ADC0_CONTROL_REG, AS3722_ADC1_CONTROL_REG),
+ regmap_reg_range(AS3722_ADC1_THRESHOLD_HI_MSB_REG,
+ AS3722_ADC_CONFIGURATION_REG),
+ regmap_reg_range(AS3722_LOCK_REG, AS3722_LOCK_REG),
+};
+
+static const struct regmap_access_table as3722_writable_table = {
+ .yes_ranges = as3722_writable_ranges,
+ .n_yes_ranges = ARRAY_SIZE(as3722_writable_ranges),
+};
+
+static const struct regmap_range as3722_cacheable_ranges[] = {
+ regmap_reg_range(AS3722_SD0_VOLTAGE_REG, AS3722_LDO11_VOLTAGE_REG),
+ regmap_reg_range(AS3722_SD_CONTROL_REG, AS3722_LDOCONTROL1_REG),
+};
+
+static const struct regmap_access_table as3722_volatile_table = {
+ .no_ranges = as3722_cacheable_ranges,
+ .n_no_ranges = ARRAY_SIZE(as3722_cacheable_ranges),
+};
+
+const struct regmap_config as3722_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = AS3722_MAX_REGISTER,
+ .cache_type = REGCACHE_RBTREE,
+ .rd_table = &as3722_readable_table,
+ .wr_table = &as3722_writable_table,
+ .volatile_table = &as3722_volatile_table,
+};
+
+static int as3722_i2c_of_probe(struct i2c_client *i2c,
+ struct as3722 *as3722)
+{
+ struct device_node *np = i2c->dev.of_node;
+ struct irq_data *irq_data;
+
+ if (!np) {
+ dev_err(&i2c->dev, "Device Tree not found\n");
+ return -EINVAL;
+ }
+
+ irq_data = irq_get_irq_data(i2c->irq);
+ if (!irq_data) {
+ dev_err(&i2c->dev, "Invalid IRQ: %d\n", i2c->irq);
+ return -EINVAL;
+ }
+
+ as3722->en_intern_int_pullup = of_property_read_bool(np,
+ "ams,enable-internal-int-pullup");
+ as3722->en_intern_i2c_pullup = of_property_read_bool(np,
+ "ams,enable-internal-i2c-pullup");
+ as3722->irq_flags = irqd_get_trigger_type(irq_data);
+ dev_dbg(&i2c->dev, "IRQ flags are 0x%08lx\n", as3722->irq_flags);
+ return 0;
+}
+
+static int as3722_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct as3722 *as3722;
+ unsigned long irq_flags;
+ int ret;
+
+ as3722 = devm_kzalloc(&i2c->dev, sizeof(struct as3722), GFP_KERNEL);
+ if (!as3722)
+ return -ENOMEM;
+
+ as3722->dev = &i2c->dev;
+ as3722->chip_irq = i2c->irq;
+ i2c_set_clientdata(i2c, as3722);
+
+ ret = as3722_i2c_of_probe(i2c, as3722);
+ if (ret < 0)
+ return ret;
+
+ as3722->regmap = devm_regmap_init_i2c(i2c, &as3722_regmap_config);
+ if (IS_ERR(as3722->regmap)) {
+ ret = PTR_ERR(as3722->regmap);
+ dev_err(&i2c->dev, "regmap init failed: %d\n", ret);
+ return ret;
+ }
+
+ ret = as3722_check_device_id(as3722);
+ if (ret < 0)
+ return ret;
+
+ irq_flags = as3722->irq_flags | IRQF_ONESHOT;
+ ret = regmap_add_irq_chip(as3722->regmap, as3722->chip_irq,
+ irq_flags, -1, &as3722_irq_chip,
+ &as3722->irq_data);
+ if (ret < 0) {
+ dev_err(as3722->dev, "Failed to add regmap irq: %d\n", ret);
+ return ret;
+ }
+
+ ret = as3722_configure_pullups(as3722);
+ if (ret < 0)
+ goto scrub;
+
+ ret = mfd_add_devices(&i2c->dev, -1, as3722_devs,
+ ARRAY_SIZE(as3722_devs), NULL, 0,
+ regmap_irq_get_domain(as3722->irq_data));
+ if (ret) {
+ dev_err(as3722->dev, "Failed to add MFD devices: %d\n", ret);
+ goto scrub;
+ }
+
+ dev_dbg(as3722->dev, "AS3722 core driver initialized successfully\n");
+ return 0;
+
+scrub:
+ regmap_del_irq_chip(as3722->chip_irq, as3722->irq_data);
+ return ret;
+}
+
+static int as3722_i2c_remove(struct i2c_client *i2c)
+{
+ struct as3722 *as3722 = i2c_get_clientdata(i2c);
+
+ mfd_remove_devices(as3722->dev);
+ regmap_del_irq_chip(as3722->chip_irq, as3722->irq_data);
+ return 0;
+}
+
+static const struct of_device_id as3722_of_match[] = {
+ { .compatible = "ams,as3722", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, as3722_of_match);
+
+static const struct i2c_device_id as3722_i2c_id[] = {
+ { "as3722", 0 },
+ {},
+};
+MODULE_DEVICE_TABLE(i2c, as3722_i2c_id);
+
+static struct i2c_driver as3722_i2c_driver = {
+ .driver = {
+ .name = "as3722",
+ .owner = THIS_MODULE,
+ .of_match_table = as3722_of_match,
+ },
+ .probe = as3722_i2c_probe,
+ .remove = as3722_i2c_remove,
+ .id_table = as3722_i2c_id,
+};
+
+module_i2c_driver(as3722_i2c_driver);
+
+MODULE_DESCRIPTION("I2C support for AS3722 PMICs");
+MODULE_AUTHOR("Florian Lobmaier <florian.lobmaier@xxxxxxx>");
+MODULE_AUTHOR("Laxman Dewangan <ldewangan@xxxxxxxxxx>");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/mfd/as3722.h b/include/linux/mfd/as3722.h
new file mode 100644
index 0000000..16bf8a0
--- /dev/null
+++ b/include/linux/mfd/as3722.h
@@ -0,0 +1,423 @@
+/*
+ * as3722 definitions
+ *
+ * Copyright (C) 2013 ams
+ * Copyright (c) 2013, NVIDIA Corporation. All rights reserved.
+ *
+ * Author: Florian Lobmaier <florian.lobmaier@xxxxxxx>
+ * Author: Laxman Dewangan <ldewangan@xxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __LINUX_MFD_AS3722_H__
+#define __LINUX_MFD_AS3722_H__
+
+#include <linux/regmap.h>
+
+/* AS3722 registers */
+#define AS3722_SD0_VOLTAGE_REG 0x00
+#define AS3722_SD1_VOLTAGE_REG 0x01
+#define AS3722_SD2_VOLTAGE_REG 0x02
+#define AS3722_SD3_VOLTAGE_REG 0x03
+#define AS3722_SD4_VOLTAGE_REG 0x04
+#define AS3722_SD5_VOLTAGE_REG 0x05
+#define AS3722_SD6_VOLTAGE_REG 0x06
+#define AS3722_GPIO0_CONTROL_REG 0x08
+#define AS3722_GPIO1_CONTROL_REG 0x09
+#define AS3722_GPIO2_CONTROL_REG 0x0A
+#define AS3722_GPIO3_CONTROL_REG 0x0B
+#define AS3722_GPIO4_CONTROL_REG 0x0C
+#define AS3722_GPIO5_CONTROL_REG 0x0D
+#define AS3722_GPIO6_CONTROL_REG 0x0E
+#define AS3722_GPIO7_CONTROL_REG 0x0F
+#define AS3722_LDO0_VOLTAGE_REG 0x10
+#define AS3722_LDO1_VOLTAGE_REG 0x11
+#define AS3722_LDO2_VOLTAGE_REG 0x12
+#define AS3722_LDO3_VOLTAGE_REG 0x13
+#define AS3722_LDO4_VOLTAGE_REG 0x14
+#define AS3722_LDO5_VOLTAGE_REG 0x15
+#define AS3722_LDO6_VOLTAGE_REG 0x16
+#define AS3722_LDO7_VOLTAGE_REG 0x17
+#define AS3722_LDO9_VOLTAGE_REG 0x19
+#define AS3722_LDO10_VOLTAGE_REG 0x1A
+#define AS3722_LDO11_VOLTAGE_REG 0x1B
+#define AS3722_GPIO_DEB1_REG 0x1E
+#define AS3722_GPIO_DEB2_REG 0x1F
+#define AS3722_GPIO_SIGNAL_OUT_REG 0x20
+#define AS3722_GPIO_SIGNAL_IN_REG 0x21
+#define AS3722_REG_SEQU_MOD1_REG 0x22
+#define AS3722_REG_SEQU_MOD2_REG 0x23
+#define AS3722_REG_SEQU_MOD3_REG 0x24
+#define AS3722_SD_PHSW_CTRL_REG 0x27
+#define AS3722_SD_PHSW_STATUS 0x28
+#define AS3722_SD0_CONTROL_REG 0x29
+#define AS3722_SD1_CONTROL_REG 0x2A
+#define AS3722_SDmph_CONTROL_REG 0x2B
+#define AS3722_SD23_CONTROL_REG 0x2C
+#define AS3722_SD4_CONTROL_REG 0x2D
+#define AS3722_SD5_CONTROL_REG 0x2E
+#define AS3722_SD6_CONTROL_REG 0x2F
+#define AS3722_SD_DVM_REG 0x30
+#define AS3722_RESET_REASON_REG 0x31
+#define AS3722_BATTERY_VOLTAGE_MONITOR_REG 0x32
+#define AS3722_STARTUP_CONTROL_REG 0x33
+#define AS3722_RESET_TIMER_REG 0x34
+#define AS3722_REFERENCE_CONTROL_REG 0x35
+#define AS3722_RESET_CONTROL_REG 0x36
+#define AS3722_OVER_TEMP_CONTROL_REG 0x37
+#define AS3722_WATCHDOG_CONTROL_REG 0x38
+#define AS3722_REG_STANDBY_MOD1_REG 0x39
+#define AS3722_REG_STANDBY_MOD2_REG 0x3A
+#define AS3722_REG_STANDBY_MOD3_REG 0x3B
+#define AS3722_ENABLE_CTRL1_REG 0x3C
+#define AS3722_ENABLE_CTRL2_REG 0x3D
+#define AS3722_ENABLE_CTRL3_REG 0x3E
+#define AS3722_ENABLE_CTRL4_REG 0x3F
+#define AS3722_ENABLE_CTRL5_REG 0x40
+#define AS3722_PWM_CONTROL_L_REG 0x41
+#define AS3722_PWM_CONTROL_H_REG 0x42
+#define AS3722_WATCHDOG_TIMER_REG 0x46
+#define AS3722_WATCHDOG_SOFTWARE_SIGNAL_REG 0x48
+#define AS3722_IOVOLTAGE_REG 0x49
+#define AS3722_BATTERY_VOLTAGE_MONITOR2_REG 0x4A
+#define AS3722_SD_CONTROL_REG 0x4D
+#define AS3722_LDOCONTROL0_REG 0x4E
+#define AS3722_LDOCONTROL1_REG 0x4F
+#define AS3722_SD0_PROTECT_REG 0x50
+#define AS3722_SD6_PROTECT_REG 0x51
+#define AS3722_PWM_VCONTROL1_REG 0x52
+#define AS3722_PWM_VCONTROL2_REG 0x53
+#define AS3722_PWM_VCONTROL3_REG 0x54
+#define AS3722_PWM_VCONTROL4_REG 0x55
+#define AS3722_BB_CHARGER_REG 0x57
+#define AS3722_CTRL_SEQU1_REG 0x58
+#define AS3722_CTRL_SEQU2_REG 0x59
+#define AS3722_OVCURRENT_REG 0x5A
+#define AS3722_OVCURRENT_DEB_REG 0x5B
+#define AS3722_SDLV_DEB_REG 0x5C
+#define AS3722_OC_PG_CTRL_REG 0x5D
+#define AS3722_OC_PG_CTRL2_REG 0x5E
+#define AS3722_CTRL_STATUS 0x5F
+#define AS3722_RTC_CONTROL_REG 0x60
+#define AS3722_RTC_SECOND_REG 0x61
+#define AS3722_RTC_MINUTE_REG 0x62
+#define AS3722_RTC_HOUR_REG 0x63
+#define AS3722_RTC_DAY_REG 0x64
+#define AS3722_RTC_MONTH_REG 0x65
+#define AS3722_RTC_YEAR_REG 0x66
+#define AS3722_RTC_ALARM_SECOND_REG 0x67
+#define AS3722_RTC_ALARM_MINUTE_REG 0x68
+#define AS3722_RTC_ALARM_HOUR_REG 0x69
+#define AS3722_RTC_ALARM_DAY_REG 0x6A
+#define AS3722_RTC_ALARM_MONTH_REG 0x6B
+#define AS3722_RTC_ALARM_YEAR_REG 0x6C
+#define AS3722_SRAM_REG 0x6D
+#define AS3722_RTC_ACCESS_REG 0x6F
+#define AS3722_RTC_STATUS_REG 0x73
+#define AS3722_INTERRUPT_MASK1_REG 0x74
+#define AS3722_INTERRUPT_MASK2_REG 0x75
+#define AS3722_INTERRUPT_MASK3_REG 0x76
+#define AS3722_INTERRUPT_MASK4_REG 0x77
+#define AS3722_INTERRUPT_STATUS1_REG 0x78
+#define AS3722_INTERRUPT_STATUS2_REG 0x79
+#define AS3722_INTERRUPT_STATUS3_REG 0x7A
+#define AS3722_INTERRUPT_STATUS4_REG 0x7B
+#define AS3722_TEMP_STATUS_REG 0x7D
+#define AS3722_ADC0_CONTROL_REG 0x80
+#define AS3722_ADC1_CONTROL_REG 0x81
+#define AS3722_ADC0_MSB_RESULT_REG 0x82
+#define AS3722_ADC0_LSB_RESULT_REG 0x83
+#define AS3722_ADC1_MSB_RESULT_REG 0x84
+#define AS3722_ADC1_LSB_RESULT_REG 0x85
+#define AS3722_ADC1_THRESHOLD_HI_MSB_REG 0x86
+#define AS3722_ADC1_THRESHOLD_HI_LSB_REG 0x87
+#define AS3722_ADC1_THRESHOLD_LO_MSB_REG 0x88
+#define AS3722_ADC1_THRESHOLD_LO_LSB_REG 0x89
+#define AS3722_ADC_CONFIGURATION_REG 0x8A
+#define AS3722_ASIC_ID1_REG 0x90
+#define AS3722_ASIC_ID2_REG 0x91
+#define AS3722_LOCK_REG 0x9E
+#define AS3722_MAX_REGISTER 0xF4
+
+#define AS3722_SD0_EXT_ENABLE_MASK 0x03
+#define AS3722_SD1_EXT_ENABLE_MASK 0x0C
+#define AS3722_SD2_EXT_ENABLE_MASK 0x30
+#define AS3722_SD3_EXT_ENABLE_MASK 0xC0
+#define AS3722_SD4_EXT_ENABLE_MASK 0x03
+#define AS3722_SD5_EXT_ENABLE_MASK 0x0C
+#define AS3722_SD6_EXT_ENABLE_MASK 0x30
+#define AS3722_LDO0_EXT_ENABLE_MASK 0x03
+#define AS3722_LDO1_EXT_ENABLE_MASK 0x0C
+#define AS3722_LDO2_EXT_ENABLE_MASK 0x30
+#define AS3722_LDO3_EXT_ENABLE_MASK 0xC0
+#define AS3722_LDO4_EXT_ENABLE_MASK 0x03
+#define AS3722_LDO5_EXT_ENABLE_MASK 0x0C
+#define AS3722_LDO6_EXT_ENABLE_MASK 0x30
+#define AS3722_LDO7_EXT_ENABLE_MASK 0xC0
+#define AS3722_LDO9_EXT_ENABLE_MASK 0x0C
+#define AS3722_LDO10_EXT_ENABLE_MASK 0x30
+#define AS3722_LDO11_EXT_ENABLE_MASK 0xC0
+
+#define AS3722_OVCURRENT_SD0_ALARM_MASK 0x07
+#define AS3722_OVCURRENT_SD0_ALARM_SHIFT 0x01
+#define AS3722_OVCURRENT_SD0_TRIP_MASK 0x18
+#define AS3722_OVCURRENT_SD0_TRIP_SHIFT 0x03
+#define AS3722_OVCURRENT_SD1_TRIP_MASK 0x60
+#define AS3722_OVCURRENT_SD1_TRIP_SHIFT 0x05
+
+#define AS3722_OVCURRENT_SD6_ALARM_MASK 0x07
+#define AS3722_OVCURRENT_SD6_ALARM_SHIFT 0x01
+#define AS3722_OVCURRENT_SD6_TRIP_MASK 0x18
+#define AS3722_OVCURRENT_SD6_TRIP_SHIFT 0x03
+
+/* AS3722 register bits and bit masks */
+#define AS3722_LDO_ILIMIT_MASK BIT(7)
+#define AS3722_LDO_ILIMIT_BIT BIT(7)
+#define AS3722_LDO0_VSEL_MASK 0x1F
+#define AS3722_LDO0_VSEL_MIN 0x01
+#define AS3722_LDO0_VSEL_MAX 0x12
+#define AS3722_LDO0_NUM_VOLT 0x12
+#define AS3722_LDO3_VSEL_MASK 0x3F
+#define AS3722_LDO3_VSEL_MIN 0x01
+#define AS3722_LDO3_VSEL_MAX 0x2D
+#define AS3722_LDO3_NUM_VOLT 0x2D
+#define AS3722_LDO_VSEL_MASK 0x7F
+#define AS3722_LDO_VSEL_MIN 0x01
+#define AS3722_LDO_VSEL_MAX 0x7F
+#define AS3722_LDO_VSEL_DNU_MIN 0x25
+#define AS3722_LDO_VSEL_DNU_MAX 0x3F
+#define AS3722_LDO_NUM_VOLT 0x80
+
+#define AS3722_LDO0_CTRL BIT(0)
+#define AS3722_LDO1_CTRL BIT(1)
+#define AS3722_LDO2_CTRL BIT(2)
+#define AS3722_LDO3_CTRL BIT(3)
+#define AS3722_LDO4_CTRL BIT(4)
+#define AS3722_LDO5_CTRL BIT(5)
+#define AS3722_LDO6_CTRL BIT(6)
+#define AS3722_LDO7_CTRL BIT(7)
+#define AS3722_LDO9_CTRL BIT(1)
+#define AS3722_LDO10_CTRL BIT(2)
+#define AS3722_LDO11_CTRL BIT(3)
+
+#define AS3722_LDO3_MODE_MASK (3 << 6)
+#define AS3722_LDO3_MODE_VAL(n) (((n) & 0x3) << 6)
+#define AS3722_LDO3_MODE_PMOS AS3722_LDO3_MODE_VAL(0)
+#define AS3722_LDO3_MODE_PMOS_TRACKING AS3722_LDO3_MODE_VAL(1)
+#define AS3722_LDO3_MODE_NMOS AS3722_LDO3_MODE_VAL(2)
+#define AS3722_LDO3_MODE_SWITCH AS3722_LDO3_MODE_VAL(3)
+
+#define AS3722_SD_VSEL_MASK 0x7F
+#define AS3722_SD0_VSEL_MIN 0x01
+#define AS3722_SD0_VSEL_MAX 0x5A
+#define AS3722_SD2_VSEL_MIN 0x01
+#define AS3722_SD2_VSEL_MAX 0x7F
+
+#define AS3722_SDn_CTRL(n) BIT(n)
+
+#define AS3722_SD0_MODE_FAST BIT(4)
+#define AS3722_SD1_MODE_FAST BIT(4)
+#define AS3722_SD2_MODE_FAST BIT(2)
+#define AS3722_SD3_MODE_FAST BIT(6)
+#define AS3722_SD4_MODE_FAST BIT(2)
+#define AS3722_SD5_MODE_FAST BIT(2)
+#define AS3722_SD6_MODE_FAST BIT(4)
+
+#define AS3722_POWER_OFF BIT(1)
+
+#define AS3722_INTERRUPT_MASK1_LID BIT(0)
+#define AS3722_INTERRUPT_MASK1_ACOK BIT(1)
+#define AS3722_INTERRUPT_MASK1_ENABLE1 BIT(2)
+#define AS3722_INTERRUPT_MASK1_OCURR_ALARM_SD0 BIT(3)
+#define AS3722_INTERRUPT_MASK1_ONKEY_LONG BIT(4)
+#define AS3722_INTERRUPT_MASK1_ONKEY BIT(5)
+#define AS3722_INTERRUPT_MASK1_OVTMP BIT(6)
+#define AS3722_INTERRUPT_MASK1_LOWBAT BIT(7)
+
+#define AS3722_INTERRUPT_MASK2_SD0_LV BIT(0)
+#define AS3722_INTERRUPT_MASK2_SD1_LV BIT(1)
+#define AS3722_INTERRUPT_MASK2_SD2345_LV BIT(2)
+#define AS3722_INTERRUPT_MASK2_PWM1_OV_PROT BIT(3)
+#define AS3722_INTERRUPT_MASK2_PWM2_OV_PROT BIT(4)
+#define AS3722_INTERRUPT_MASK2_ENABLE2 BIT(5)
+#define AS3722_INTERRUPT_MASK2_SD6_LV BIT(6)
+#define AS3722_INTERRUPT_MASK2_RTC_REP BIT(7)
+
+#define AS3722_INTERRUPT_MASK3_RTC_ALARM BIT(0)
+#define AS3722_INTERRUPT_MASK3_GPIO1 BIT(1)
+#define AS3722_INTERRUPT_MASK3_GPIO2 BIT(2)
+#define AS3722_INTERRUPT_MASK3_GPIO3 BIT(3)
+#define AS3722_INTERRUPT_MASK3_GPIO4 BIT(4)
+#define AS3722_INTERRUPT_MASK3_GPIO5 BIT(5)
+#define AS3722_INTERRUPT_MASK3_WATCHDOG BIT(6)
+#define AS3722_INTERRUPT_MASK3_ENABLE3 BIT(7)
+
+#define AS3722_INTERRUPT_MASK4_TEMP_SD0_SHUTDOWN BIT(0)
+#define AS3722_INTERRUPT_MASK4_TEMP_SD1_SHUTDOWN BIT(1)
+#define AS3722_INTERRUPT_MASK4_TEMP_SD6_SHUTDOWN BIT(2)
+#define AS3722_INTERRUPT_MASK4_TEMP_SD0_ALARM BIT(3)
+#define AS3722_INTERRUPT_MASK4_TEMP_SD1_ALARM BIT(4)
+#define AS3722_INTERRUPT_MASK4_TEMP_SD6_ALARM BIT(5)
+#define AS3722_INTERRUPT_MASK4_OCCUR_ALARM_SD6 BIT(6)
+#define AS3722_INTERRUPT_MASK4_ADC BIT(7)
+
+#define AS3722_ADC1_INTERVAL_TIME BIT(0)
+#define AS3722_ADC1_INT_MODE_ON BIT(1)
+#define AS3722_ADC_BUF_ON BIT(2)
+#define AS3722_ADC1_LOW_VOLTAGE_RANGE BIT(5)
+#define AS3722_ADC1_INTEVAL_SCAN BIT(6)
+#define AS3722_ADC1_INT_MASK BIT(7)
+
+#define AS3722_ADC_MSB_VAL_MASK 0x7F
+#define AS3722_ADC_LSB_VAL_MASK 0x07
+
+#define AS3722_ADC0_CONV_START BIT(7)
+#define AS3722_ADC0_CONV_NOTREADY BIT(7)
+#define AS3722_ADC0_SOURCE_SELECT_MASK 0x1F
+
+#define AS3722_ADC1_CONV_START BIT(7)
+#define AS3722_ADC1_CONV_NOTREADY BIT(7)
+#define AS3722_ADC1_SOURCE_SELECT_MASK 0x1F
+
+/* GPIO modes */
+#define AS3722_GPIO_MODE_MASK 0x07
+#define AS3722_GPIO_MODE_INPUT 0x00
+#define AS3722_GPIO_MODE_OUTPUT_VDDH 0x01
+#define AS3722_GPIO_MODE_IO_OPEN_DRAIN 0x02
+#define AS3722_GPIO_MODE_ADC_IN 0x03
+#define AS3722_GPIO_MODE_INPUT_PULL_UP 0x04
+#define AS3722_GPIO_MODE_INPUT_PULL_DOWN 0x05
+#define AS3722_GPIO_MODE_IO_OPEN_DRAIN_PULL_UP 0x06
+#define AS3722_GPIO_MODE_OUTPUT_VDDL 0x07
+#define AS3722_GPIO_MODE_VAL(n) ((n) & AS3722_GPIO_MODE_MASK)
+
+#define AS3722_GPIO_INV BIT(7)
+#define AS3722_GPIO_IOSF_MASK 0x78
+#define AS3722_GPIO_IOSF_VAL(n) (((n) & 0xF) << 3)
+#define AS3722_GPIO_IOSF_NORMAL AS3722_GPIO_IOSF_VAL(0)
+#define AS3722_GPIO_IOSF_INTERRUPT_OUT AS3722_GPIO_IOSF_VAL(1)
+#define AS3722_GPIO_IOSF_VSUP_LOW_OUT AS3722_GPIO_IOSF_VAL(2)
+#define AS3722_GPIO_IOSF_GPIO_INTERRUPT_IN AS3722_GPIO_IOSF_VAL(3)
+#define AS3722_GPIO_IOSF_ISINK_PWM_IN AS3722_GPIO_IOSF_VAL(4)
+#define AS3722_GPIO_IOSF_VOLTAGE_STBY AS3722_GPIO_IOSF_VAL(5)
+#define AS3722_GPIO_IOSF_PWR_GOOD_OUT AS3722_GPIO_IOSF_VAL(7)
+#define AS3722_GPIO_IOSF_Q32K_OUT AS3722_GPIO_IOSF_VAL(8)
+#define AS3722_GPIO_IOSF_WATCHDOG_IN AS3722_GPIO_IOSF_VAL(9)
+#define AS3722_GPIO_IOSF_SOFT_RESET_IN AS3722_GPIO_IOSF_VAL(11)
+#define AS3722_GPIO_IOSF_PWM_OUT AS3722_GPIO_IOSF_VAL(12)
+#define AS3722_GPIO_IOSF_VSUP_LOW_DEB_OUT AS3722_GPIO_IOSF_VAL(13)
+#define AS3722_GPIO_IOSF_SD6_LOW_VOLT_LOW AS3722_GPIO_IOSF_VAL(14)
+
+#define AS3722_GPIOn_SIGNAL(n) BIT(n)
+#define AS3722_GPIOn_CONTROL_REG(n) (AS3722_GPIO0_CONTROL_REG + n)
+#define AS3722_I2C_PULL_UP BIT(4)
+#define AS3722_INT_PULL_UP BIT(5)
+
+#define AS3722_RTC_REP_WAKEUP_EN BIT(0)
+#define AS3722_RTC_ALARM_WAKEUP_EN BIT(1)
+#define AS3722_RTC_ON BIT(2)
+#define AS3722_RTC_IRQMODE BIT(3)
+#define AS3722_RTC_CLK32K_OUT_EN BIT(5)
+
+#define AS3722_WATCHDOG_TIMER_MAX 0x7F
+#define AS3722_WATCHDOG_ON BIT(0)
+#define AS3722_WATCHDOG_SW_SIG BIT(0)
+
+#define AS3722_EXT_CONTROL_ENABLE1 0x1
+#define AS3722_EXT_CONTROL_ENABLE2 0x2
+#define AS3722_EXT_CONTROL_ENABLE3 0x3
+
+/* Interrupt IDs */
+enum as3722_irq {
+ AS3722_IRQ_LID,
+ AS3722_IRQ_ACOK,
+ AS3722_IRQ_ENABLE1,
+ AS3722_IRQ_OCCUR_ALARM_SD0,
+ AS3722_IRQ_ONKEY_LONG_PRESS,
+ AS3722_IRQ_ONKEY,
+ AS3722_IRQ_OVTMP,
+ AS3722_IRQ_LOWBAT,
+ AS3722_IRQ_SD0_LV,
+ AS3722_IRQ_SD1_LV,
+ AS3722_IRQ_SD2_LV,
+ AS3722_IRQ_PWM1_OV_PROT,
+ AS3722_IRQ_PWM2_OV_PROT,
+ AS3722_IRQ_ENABLE2,
+ AS3722_IRQ_SD6_LV,
+ AS3722_IRQ_RTC_REP,
+ AS3722_IRQ_RTC_ALARM,
+ AS3722_IRQ_GPIO1,
+ AS3722_IRQ_GPIO2,
+ AS3722_IRQ_GPIO3,
+ AS3722_IRQ_GPIO4,
+ AS3722_IRQ_GPIO5,
+ AS3722_IRQ_WATCHDOG,
+ AS3722_IRQ_ENABLE3,
+ AS3722_IRQ_TEMP_SD0_SHUTDOWN,
+ AS3722_IRQ_TEMP_SD1_SHUTDOWN,
+ AS3722_IRQ_TEMP_SD2_SHUTDOWN,
+ AS3722_IRQ_TEMP_SD0_ALARM,
+ AS3722_IRQ_TEMP_SD1_ALARM,
+ AS3722_IRQ_TEMP_SD6_ALARM,
+ AS3722_IRQ_OCCUR_ALARM_SD6,
+ AS3722_IRQ_ADC,
+ AS3722_IRQ_MAX,
+};
+
+struct as3722 {
+ struct device *dev;
+ struct regmap *regmap;
+ int chip_irq;
+ unsigned long irq_flags;
+ bool en_intern_int_pullup;
+ bool en_intern_i2c_pullup;
+ struct regmap_irq_chip_data *irq_data;
+};
+
+static inline int as3722_read(struct as3722 *as3722, u32 reg, u32 *dest)
+{
+ return regmap_read(as3722->regmap, reg, dest);
+}
+
+static inline int as3722_write(struct as3722 *as3722, u32 reg, u32 value)
+{
+ return regmap_write(as3722->regmap, reg, value);
+}
+
+static inline int as3722_block_read(struct as3722 *as3722, u32 reg,
+ int count, u8 *buf)
+{
+ return regmap_bulk_read(as3722->regmap, reg, buf, count);
+}
+
+static inline int as3722_block_write(struct as3722 *as3722, u32 reg,
+ int count, u8 *data)
+{
+ return regmap_bulk_write(as3722->regmap, reg, data, count);
+}
+
+static inline int as3722_update_bits(struct as3722 *as3722, u32 reg,
+ u32 mask, u8 val)
+{
+ return regmap_update_bits(as3722->regmap, reg, mask, val);
+}
+
+static inline int as3722_irq_get_virq(struct as3722 *as3722, int irq)
+{
+ return regmap_irq_get_virq(as3722->irq_data, irq);
+}
+#endif /* __LINUX_MFD_AS3722_H__ */
--
1.7.1.1
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
