On 09/17/2013 12:45 AM, Laxman Dewangan wrote: > The AS3722 is a compact system PMU suitable for Mobile Phones, > Tablet etc. It has 4 DCDC step down regulators, 3 DCDC step down > controller, 11 LDOs. > > Add a driver to support accessing the DCDC/LDOs found on the AMS > AS3722 PMIC using regulators. > diff --git a/Documentation/devicetree/bindings/regulator/as3722-reguator.txt b/Documentation/devicetree/bindings/regulator/as3722-reguator.txt The filename is typo'd > +AMS AS3722 regulator devicetree bindings. > +The regulator node is sub node of the AS3722 node. You probably want a blank line to separate the document title from the body text. > +Optional nodes: > +- regulators : Must contain a sub-node per regulator from the list below. > + Each sub-node should contain the constraints and initialization > + information for that regulator. See regulator.txt for a > + description of standard properties for these sub-nodes. > + Additional custom properties are listed below. > + sd[0-6], ldo[0-7], ldo[9-11]. I think you want to prefix that last line with something like: "Valid regulator names are: ". > + ams,ext-control: External control of the rail. The option of > + this properties will tell which external input is > + controlling this rail. Valid values are 0, 1, 2 ad 3. > + 0: There is no external control of this rail. > + 1: Rail is controlled by ENABLE1 input pin. > + 2: Rail is controlled by ENABLE1 input pin. > + 3: Rail is controlled by ENABLE1 input pin. Those last 3 lines all say the same thing. -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
