[PATCH 3/4] regulator: as3722: add regulator driver for AMS AS3722

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The AS3722 is a compact system PMU suitable for Mobile Phones,
Tablet etc. It has 4 DCDC step down regulators, 3 DCDC step down
controller, 11 LDOs.

Add a driver to support accessing the DCDC/LDOs found on the AMS
AS3722 PMIC using regulators.

Signed-off-by: Laxman Dewangan <ldewangan@xxxxxxxxxx>
Signed-off-by: Florian Lobmaier <florian.lobmaier@xxxxxxx>
---
 .../bindings/regulator/as3722-reguator.txt         |  103 +++
 drivers/regulator/Kconfig                          |    8 +
 drivers/regulator/Makefile                         |    1 +
 drivers/regulator/as3722-regulator.c               |  883 ++++++++++++++++++++
 4 files changed, 995 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/regulator/as3722-reguator.txt
 create mode 100644 drivers/regulator/as3722-regulator.c

diff --git a/Documentation/devicetree/bindings/regulator/as3722-reguator.txt b/Documentation/devicetree/bindings/regulator/as3722-reguator.txt
new file mode 100644
index 0000000..414eda2
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/as3722-reguator.txt
@@ -0,0 +1,103 @@
+AMS AS3722 regulator devicetree bindings.
+The regulator node is sub node of the AS3722 node.
+
+Required properties:
+- compatible : Must be ams,as3722-regulator.
+
+Optional properties:
+The input supply of regulators are the optional properties on the
+regulator node. The AS3722 is having 7 DCDC step-down regulators as
+sd[0-6], 10 LDOs as ldo[0-7], ldo[9-11]. The input supply of these
+regulators are provided through following properties:
+vsup-sd2-supply: Input supply for SD2.
+vsup-sd3-supply: Input supply for SD3.
+vsup-sd4-supply: Input supply for SD4.
+vsup-sd5-supply: Input supply for SD5.
+vin-ldo0-supply: Input supply for LDO0.
+vin-ldo1-6-supply: Input supply for LDO1 and LDO6.
+vin-ldo2-5-7-supply: Input supply for LDO2, LDO5 and LDO7.
+vin-ldo3-4-supply: Input supply for LDO3 and LDO4.
+vin-ldo9-10-supply: Input supply for LDO9 and LDO10.
+vin-ldo11-supply: Input supply for LDO11.
+
+Optional nodes:
+- regulators : Must contain a sub-node per regulator from the list below.
+	       Each sub-node should contain the constraints and initialization
+	       information for that regulator. See regulator.txt for a
+	       description of standard properties for these sub-nodes.
+	       Additional custom properties  are listed below.
+	       sd[0-6], ldo[0-7], ldo[9-11].
+
+	       Optional sub-node properties:
+		ams,ext-control: External control of the rail. The option of
+			this properties will tell which external input is
+			controlling this rail. Valid values are 0, 1, 2 ad 3.
+			0: There is no external control of this rail.
+			1: Rail is controlled by ENABLE1 input pin.
+			2: Rail is controlled by ENABLE1 input pin.
+			3: Rail is controlled by ENABLE1 input pin.
+		ams,enable-oc-config: Enable overcurrent configuration of the
+			rails. This is applicable for SD0, SD1 and SD6 only.
+			Other rails do not support this configuration.
+		ams,oc-trip-threshold-perphase: Overcurrent trip threshold
+			per phase. This is in milliAmp. The valid values are:
+			2500, 3000 and 3500. Please refer datasheet for more
+			detail.
+		ams,oc-alarm-threshold-perphase: Overcurrent alarm threshold
+			per phase. This is in milliAmp. The valid values are:
+			1600, 1800, 2000, 2200, 2400, 2600, 2800. This is only
+			supported for SD0.
+		ams,enable-tracking: Enable tracking with SD1, only supported
+			by LDO3.
+
+Example:
+	ams3722: ams3722 {
+		compatible = "ams,as3722";
+		reg = <0x40>;
+		...
+
+		regulators {
+			compatible = "ams,as3722-regulator";
+			vsup-sd2-supply = <...>;
+			sd0 {
+				regulator-name = "vdd_cpu";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+				ams,ext-control = <2>;
+				ams,enable-oc-config;
+				ams,oc-trip-threshold-perphase = <3500>;
+				ams,oc-alarm-threshold-perphase = <0>;
+			};
+
+			sd1 {
+				regulator-name = "vdd_core";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+				ams,ext-control = <1>;
+				ams,enable-oc-config;
+				ams,oc-trip-threshold-perphase = <2500>;
+				ams,oc-alarm-threshold-perphase = <0>;
+			};
+			sd2 {
+				regulator-name = "vddio_ddr";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+			sd4 {
+				regulator-name = "avdd-hdmi-pex";
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1050000>;
+				regulator-always-on;
+			};
+			sd5 {
+				regulator-name = "vdd-1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+				....
+		};
+	};
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index dfe5809..9869064 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -133,6 +133,14 @@ config REGULATOR_AS3711
 	  This driver provides support for the voltage regulators on the
 	  AS3711 PMIC
 
+config REGULATOR_AS3722
+	tristate "AMS AS3722 PMIC Regulators"
+	depends on MFD_AS3722
+	help
+	  This driver provides support for the voltage regulators on the
+	  AS3722 PMIC. This will enable support for all the software
+	  controllable DCDC/LDO regulators.
+
 config REGULATOR_DA903X
 	tristate "Dialog Semiconductor DA9030/DA9034 regulators"
 	depends on PMIC_DA903X
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 185cce2..0b233bb 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_REGULATOR_AD5398) += ad5398.o
 obj-$(CONFIG_REGULATOR_ANATOP) += anatop-regulator.o
 obj-$(CONFIG_REGULATOR_ARIZONA) += arizona-micsupp.o arizona-ldo1.o
 obj-$(CONFIG_REGULATOR_AS3711) += as3711-regulator.o
+obj-$(CONFIG_REGULATOR_AS3722) += as3722-regulator.o
 obj-$(CONFIG_REGULATOR_DA903X)	+= da903x.o
 obj-$(CONFIG_REGULATOR_DA9052)	+= da9052-regulator.o
 obj-$(CONFIG_REGULATOR_DA9055)	+= da9055-regulator.o
diff --git a/drivers/regulator/as3722-regulator.c b/drivers/regulator/as3722-regulator.c
new file mode 100644
index 0000000..9baadaf
--- /dev/null
+++ b/drivers/regulator/as3722-regulator.c
@@ -0,0 +1,883 @@
+/*
+ * as3722-regulator.c - voltage regulator support for AS3722
+ *
+ * Copyright (C) 2013 ams
+ *
+ * Author: Florian Lobmaier <florian.lobmaier@xxxxxxx>
+ * Author: Laxman Dewangan <ldewangan@xxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include <linux/bug.h>
+#include <linux/err.h>
+#include <linux/export.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mfd/as3722.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/slab.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+
+/* Regulator IDs */
+enum as3722_regulators_id {
+	AS3722_REGULATOR_ID_SD0,
+	AS3722_REGULATOR_ID_SD1,
+	AS3722_REGULATOR_ID_SD2,
+	AS3722_REGULATOR_ID_SD3,
+	AS3722_REGULATOR_ID_SD4,
+	AS3722_REGULATOR_ID_SD5,
+	AS3722_REGULATOR_ID_SD6,
+	AS3722_REGULATOR_ID_LDO0,
+	AS3722_REGULATOR_ID_LDO1,
+	AS3722_REGULATOR_ID_LDO2,
+	AS3722_REGULATOR_ID_LDO3,
+	AS3722_REGULATOR_ID_LDO4,
+	AS3722_REGULATOR_ID_LDO5,
+	AS3722_REGULATOR_ID_LDO6,
+	AS3722_REGULATOR_ID_LDO7,
+	AS3722_REGULATOR_ID_LDO9,
+	AS3722_REGULATOR_ID_LDO10,
+	AS3722_REGULATOR_ID_LDO11,
+	AS3722_REGULATOR_ID_MAX,
+};
+
+struct as3722_register_mapping {
+	u8 regulator_id;
+	const char *name;
+	const char *sname;
+	u8 vsel_reg;
+	u8 vsel_mask;
+	int n_voltages;
+	u32 enable_reg;
+	u8 enable_mask;
+	u32 control_reg;
+	u8 mode_mask;
+	u32 sleep_ctrl_reg;
+	u8 sleep_ctrl_mask;
+};
+
+struct as3722_regulator_config_data {
+	struct regulator_init_data *reg_init;
+	bool enable_tracking;
+	int ext_control;
+	bool enable_oc_configure;
+	int oc_trip_thres_perphase;
+	int oc_alarm_thres_perphase;
+};
+
+struct as3722_regulators {
+	struct device *dev;
+	struct as3722 *as3722;
+	struct regulator_dev *rdevs[AS3722_REGULATOR_ID_MAX];
+	struct regulator_desc desc[AS3722_REGULATOR_ID_MAX];
+	struct as3722_regulator_config_data
+			reg_config_data[AS3722_REGULATOR_ID_MAX];
+};
+
+static const struct as3722_register_mapping as3722_reg_lookup[] = {
+	{
+		.regulator_id = AS3722_REGULATOR_ID_SD0,
+		.name = "as3722-sd0",
+		.vsel_reg = AS3722_SD0_VOLTAGE_REG,
+		.vsel_mask = AS3722_SD_VSEL_MASK,
+		.enable_reg = AS3722_SD_CONTROL_REG,
+		.enable_mask = AS3722_SDn_CTRL(0),
+		.sleep_ctrl_reg = AS3722_ENABLE_CTRL1_REG,
+		.sleep_ctrl_mask = AS3722_SD0_EXT_ENABLE_MASK,
+		.control_reg = AS3722_SD0_CONTROL_REG,
+		.mode_mask = AS3722_SD0_MODE_FAST,
+		.n_voltages = AS3722_SD0_VSEL_MAX,
+	},
+	{
+		.regulator_id = AS3722_REGULATOR_ID_SD1,
+		.name = "as3722-sd1",
+		.vsel_reg = AS3722_SD1_VOLTAGE_REG,
+		.vsel_mask = AS3722_SD_VSEL_MASK,
+		.enable_reg = AS3722_SD_CONTROL_REG,
+		.enable_mask = AS3722_SDn_CTRL(1),
+		.sleep_ctrl_reg = AS3722_ENABLE_CTRL1_REG,
+		.sleep_ctrl_mask = AS3722_SD1_EXT_ENABLE_MASK,
+		.control_reg = AS3722_SD1_CONTROL_REG,
+		.mode_mask = AS3722_SD1_MODE_FAST,
+		.n_voltages = AS3722_SD0_VSEL_MAX,
+	},
+	{
+		.regulator_id = AS3722_REGULATOR_ID_SD2,
+		.name = "as3722-sd2",
+		.sname = "vsup-sd2",
+		.vsel_reg = AS3722_SD2_VOLTAGE_REG,
+		.vsel_mask = AS3722_SD_VSEL_MASK,
+		.enable_reg = AS3722_SD_CONTROL_REG,
+		.enable_mask = AS3722_SDn_CTRL(2),
+		.sleep_ctrl_reg = AS3722_ENABLE_CTRL1_REG,
+		.sleep_ctrl_mask = AS3722_SD2_EXT_ENABLE_MASK,
+		.control_reg = AS3722_SD23_CONTROL_REG,
+		.mode_mask = AS3722_SD2_MODE_FAST,
+		.n_voltages = AS3722_SD2_VSEL_MAX,
+	},
+	{
+		.regulator_id = AS3722_REGULATOR_ID_SD3,
+		.name = "as3722-sd3",
+		.sname = "vsup-sd3",
+		.vsel_reg = AS3722_SD3_VOLTAGE_REG,
+		.vsel_mask = AS3722_SD_VSEL_MASK,
+		.enable_reg = AS3722_SD_CONTROL_REG,
+		.enable_mask = AS3722_SDn_CTRL(3),
+		.sleep_ctrl_reg = AS3722_ENABLE_CTRL1_REG,
+		.sleep_ctrl_mask = AS3722_SD3_EXT_ENABLE_MASK,
+		.control_reg = AS3722_SD23_CONTROL_REG,
+		.mode_mask = AS3722_SD3_MODE_FAST,
+		.n_voltages = AS3722_SD2_VSEL_MAX,
+	},
+	{
+		.regulator_id = AS3722_REGULATOR_ID_SD4,
+		.name = "as3722-sd4",
+		.sname = "vsup-sd4",
+		.vsel_reg = AS3722_SD4_VOLTAGE_REG,
+		.vsel_mask = AS3722_SD_VSEL_MASK,
+		.enable_reg = AS3722_SD_CONTROL_REG,
+		.enable_mask = AS3722_SDn_CTRL(4),
+		.sleep_ctrl_reg = AS3722_ENABLE_CTRL2_REG,
+		.sleep_ctrl_mask = AS3722_SD4_EXT_ENABLE_MASK,
+		.control_reg = AS3722_SD4_CONTROL_REG,
+		.mode_mask = AS3722_SD4_MODE_FAST,
+		.n_voltages = AS3722_SD2_VSEL_MAX,
+	},
+	{
+		.regulator_id = AS3722_REGULATOR_ID_SD5,
+		.name = "as3722-sd5",
+		.sname = "vsup-sd5",
+		.vsel_reg = AS3722_SD5_VOLTAGE_REG,
+		.vsel_mask = AS3722_SD_VSEL_MASK,
+		.enable_reg = AS3722_SD_CONTROL_REG,
+		.enable_mask = AS3722_SDn_CTRL(5),
+		.sleep_ctrl_reg = AS3722_ENABLE_CTRL2_REG,
+		.sleep_ctrl_mask = AS3722_SD5_EXT_ENABLE_MASK,
+		.control_reg = AS3722_SD5_CONTROL_REG,
+		.mode_mask = AS3722_SD5_MODE_FAST,
+		.n_voltages = AS3722_SD2_VSEL_MAX,
+	},
+	{
+		.regulator_id = AS3722_REGULATOR_ID_SD6,
+		.name = "as3722-sd6",
+		.vsel_reg = AS3722_SD6_VOLTAGE_REG,
+		.vsel_mask = AS3722_SD_VSEL_MASK,
+		.enable_reg = AS3722_SD_CONTROL_REG,
+		.enable_mask = AS3722_SDn_CTRL(6),
+		.sleep_ctrl_reg = AS3722_ENABLE_CTRL2_REG,
+		.sleep_ctrl_mask = AS3722_SD6_EXT_ENABLE_MASK,
+		.control_reg = AS3722_SD6_CONTROL_REG,
+		.mode_mask = AS3722_SD6_MODE_FAST,
+		.n_voltages = AS3722_SD0_VSEL_MAX,
+	},
+	{
+		.regulator_id = AS3722_REGULATOR_ID_LDO0,
+		.name = "as3722-ldo0",
+		.sname = "vin-ldo0",
+		.vsel_reg = AS3722_LDO0_VOLTAGE_REG,
+		.vsel_mask = AS3722_LDO0_VSEL_MASK,
+		.enable_reg = AS3722_LDOCONTROL0_REG,
+		.enable_mask = AS3722_LDO0_CTRL,
+		.sleep_ctrl_reg = AS3722_ENABLE_CTRL3_REG,
+		.sleep_ctrl_mask = AS3722_LDO0_EXT_ENABLE_MASK,
+		.n_voltages = AS3722_LDO0_NUM_VOLT,
+	},
+	{
+		.regulator_id = AS3722_REGULATOR_ID_LDO1,
+		.name = "as3722-ldo1",
+		.sname = "vin-ldo1-6",
+		.vsel_reg = AS3722_LDO1_VOLTAGE_REG,
+		.vsel_mask = AS3722_LDO_VSEL_MASK,
+		.enable_reg = AS3722_LDOCONTROL0_REG,
+		.enable_mask = AS3722_LDO1_CTRL,
+		.sleep_ctrl_reg = AS3722_ENABLE_CTRL3_REG,
+		.sleep_ctrl_mask = AS3722_LDO1_EXT_ENABLE_MASK,
+		.n_voltages = AS3722_LDO_NUM_VOLT,
+	},
+	{
+		.regulator_id = AS3722_REGULATOR_ID_LDO2,
+		.name = "as3722-ldo2",
+		.sname = "vin-ldo2-5-7",
+		.vsel_reg = AS3722_LDO2_VOLTAGE_REG,
+		.vsel_mask = AS3722_LDO_VSEL_MASK,
+		.enable_reg = AS3722_LDOCONTROL0_REG,
+		.enable_mask = AS3722_LDO2_CTRL,
+		.sleep_ctrl_reg = AS3722_ENABLE_CTRL3_REG,
+		.sleep_ctrl_mask = AS3722_LDO2_EXT_ENABLE_MASK,
+		.n_voltages = AS3722_LDO_NUM_VOLT,
+	},
+	{
+		.regulator_id = AS3722_REGULATOR_ID_LDO3,
+		.name = "as3722-ldo3",
+		.name = "vin-ldo3-4",
+		.vsel_reg = AS3722_LDO3_VOLTAGE_REG,
+		.vsel_mask = AS3722_LDO3_VSEL_MASK,
+		.enable_reg = AS3722_LDOCONTROL0_REG,
+		.enable_mask = AS3722_LDO3_CTRL,
+		.sleep_ctrl_reg = AS3722_ENABLE_CTRL3_REG,
+		.sleep_ctrl_mask = AS3722_LDO3_EXT_ENABLE_MASK,
+		.n_voltages = AS3722_LDO3_NUM_VOLT,
+	},
+	{
+		.regulator_id = AS3722_REGULATOR_ID_LDO4,
+		.name = "as3722-ldo4",
+		.name = "vin-ldo3-4",
+		.vsel_reg = AS3722_LDO4_VOLTAGE_REG,
+		.vsel_mask = AS3722_LDO_VSEL_MASK,
+		.enable_reg = AS3722_LDOCONTROL0_REG,
+		.enable_mask = AS3722_LDO4_CTRL,
+		.sleep_ctrl_reg = AS3722_ENABLE_CTRL4_REG,
+		.sleep_ctrl_mask = AS3722_LDO4_EXT_ENABLE_MASK,
+		.n_voltages = AS3722_LDO_NUM_VOLT,
+	},
+	{
+		.regulator_id = AS3722_REGULATOR_ID_LDO5,
+		.name = "as3722-ldo5",
+		.sname = "vin-ldo2-5-7",
+		.vsel_reg = AS3722_LDO5_VOLTAGE_REG,
+		.vsel_mask = AS3722_LDO_VSEL_MASK,
+		.enable_reg = AS3722_LDOCONTROL0_REG,
+		.enable_mask = AS3722_LDO5_CTRL,
+		.sleep_ctrl_reg = AS3722_ENABLE_CTRL4_REG,
+		.sleep_ctrl_mask = AS3722_LDO5_EXT_ENABLE_MASK,
+		.n_voltages = AS3722_LDO_NUM_VOLT,
+	},
+	{
+		.regulator_id = AS3722_REGULATOR_ID_LDO6,
+		.name = "as3722-ldo6",
+		.sname = "vin-ldo1-6",
+		.vsel_reg = AS3722_LDO6_VOLTAGE_REG,
+		.vsel_mask = AS3722_LDO_VSEL_MASK,
+		.enable_reg = AS3722_LDOCONTROL0_REG,
+		.enable_mask = AS3722_LDO6_CTRL,
+		.sleep_ctrl_reg = AS3722_ENABLE_CTRL4_REG,
+		.sleep_ctrl_mask = AS3722_LDO6_EXT_ENABLE_MASK,
+		.n_voltages = AS3722_LDO_NUM_VOLT,
+	},
+	{
+		.regulator_id = AS3722_REGULATOR_ID_LDO7,
+		.name = "as3722-ldo7",
+		.sname = "vin-ldo2-5-7",
+		.vsel_reg = AS3722_LDO7_VOLTAGE_REG,
+		.vsel_mask = AS3722_LDO_VSEL_MASK,
+		.enable_reg = AS3722_LDOCONTROL0_REG,
+		.enable_mask = AS3722_LDO7_CTRL,
+		.sleep_ctrl_reg = AS3722_ENABLE_CTRL4_REG,
+		.sleep_ctrl_mask = AS3722_LDO7_EXT_ENABLE_MASK,
+		.n_voltages = AS3722_LDO_NUM_VOLT,
+	},
+	{
+		.regulator_id = AS3722_REGULATOR_ID_LDO9,
+		.name = "as3722-ldo9",
+		.sname = "vin-ldo9-10",
+		.vsel_reg = AS3722_LDO9_VOLTAGE_REG,
+		.vsel_mask = AS3722_LDO_VSEL_MASK,
+		.enable_reg = AS3722_LDOCONTROL1_REG,
+		.enable_mask = AS3722_LDO9_CTRL,
+		.sleep_ctrl_reg = AS3722_ENABLE_CTRL5_REG,
+		.sleep_ctrl_mask = AS3722_LDO9_EXT_ENABLE_MASK,
+		.n_voltages = AS3722_LDO_NUM_VOLT,
+	},
+	{
+		.regulator_id = AS3722_REGULATOR_ID_LDO10,
+		.name = "as3722-ldo10",
+		.sname = "vin-ldo9-10",
+		.vsel_reg = AS3722_LDO10_VOLTAGE_REG,
+		.vsel_mask = AS3722_LDO_VSEL_MASK,
+		.enable_reg = AS3722_LDOCONTROL1_REG,
+		.enable_mask = AS3722_LDO10_CTRL,
+		.sleep_ctrl_reg = AS3722_ENABLE_CTRL5_REG,
+		.sleep_ctrl_mask = AS3722_LDO10_EXT_ENABLE_MASK,
+		.n_voltages = AS3722_LDO_NUM_VOLT,
+	},
+	{
+		.regulator_id = AS3722_REGULATOR_ID_LDO11,
+		.name = "as3722-ldo11",
+		.sname = "vin-ldo11",
+		.vsel_reg = AS3722_LDO11_VOLTAGE_REG,
+		.vsel_mask = AS3722_LDO_VSEL_MASK,
+		.enable_reg = AS3722_LDOCONTROL1_REG,
+		.enable_mask = AS3722_LDO11_CTRL,
+		.sleep_ctrl_reg = AS3722_ENABLE_CTRL5_REG,
+		.sleep_ctrl_mask = AS3722_LDO11_EXT_ENABLE_MASK,
+		.n_voltages = AS3722_LDO_NUM_VOLT,
+	},
+};
+
+static struct regulator_ops as3722_ldo0_ops = {
+	.is_enabled = regulator_is_enabled_regmap,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.list_voltage = regulator_list_voltage_linear,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+};
+
+static struct regulator_ops as3722_ldo0_extcntrl_ops = {
+	.list_voltage = regulator_list_voltage_linear,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+};
+
+static int as3722_ldo3_set_tracking_mode(struct as3722_regulators *as3722_reg,
+		int id, u8 mode)
+{
+	struct as3722 *as3722 = as3722_reg->as3722;
+
+	switch (mode) {
+	case AS3722_LDO3_MODE_PMOS:
+	case AS3722_LDO3_MODE_PMOS_TRACKING:
+	case AS3722_LDO3_MODE_NMOS:
+	case AS3722_LDO3_MODE_SWITCH:
+		return as3722_update_bits(as3722,
+			as3722_reg_lookup[id].vsel_reg,
+			AS3722_LDO3_MODE_MASK, mode);
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static struct regulator_ops as3722_ldo3_ops = {
+	.is_enabled = regulator_is_enabled_regmap,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.list_voltage = regulator_list_voltage_linear,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+};
+
+static struct regulator_ops as3722_ldo3_extcntrl_ops = {
+	.list_voltage = regulator_list_voltage_linear,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+};
+
+static int as3722_ldo_get_voltage_sel(struct regulator_dev *rdev)
+{
+	int ret;
+
+	ret = regulator_get_voltage_sel_regmap(rdev);
+	if (ret >= 0x40)
+		ret -= 0x1B;
+	return ret;
+}
+
+static int as3722_ldo_set_voltage_sel(struct regulator_dev *rdev,
+		unsigned int selector)
+{
+	unsigned int sel = selector;
+
+	if (sel >= 0x25)
+		sel += 0x1B;
+	return regulator_set_voltage_sel_regmap(rdev, sel);
+}
+
+static struct regulator_ops as3722_ldo_ops = {
+	.is_enabled = regulator_is_enabled_regmap,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.get_voltage_sel = as3722_ldo_get_voltage_sel,
+	.set_voltage_sel = as3722_ldo_set_voltage_sel,
+	.list_voltage = regulator_list_voltage_linear,
+};
+
+static struct regulator_ops as3722_ldo_extcntrl_ops = {
+	.get_voltage_sel = as3722_ldo_get_voltage_sel,
+	.set_voltage_sel = as3722_ldo_set_voltage_sel,
+	.list_voltage = regulator_list_voltage_linear,
+};
+
+static unsigned int as3722_sd_get_mode(struct regulator_dev *dev)
+{
+	struct as3722_regulators *as3722_regs = rdev_get_drvdata(dev);
+	struct as3722 *as3722 = as3722_regs->as3722;
+	int id = rdev_get_id(dev);
+	u32 val;
+	int ret;
+
+	if (!as3722_reg_lookup[id].control_reg)
+		return -ERANGE;
+
+	ret = as3722_read(as3722, as3722_reg_lookup[id].control_reg, &val);
+	if (ret < 0) {
+		dev_err(as3722_regs->dev, "Reg 0x%02x read failed: %d\n",
+			as3722_reg_lookup[id].control_reg, ret);
+		return ret;
+	}
+
+	if (val & as3722_reg_lookup[id].mode_mask)
+		return REGULATOR_MODE_FAST;
+	else
+		return REGULATOR_MODE_NORMAL;
+}
+
+static int as3722_sd_set_mode(struct regulator_dev *dev,
+		unsigned int mode)
+{
+	struct as3722_regulators *as3722_regs = rdev_get_drvdata(dev);
+	struct as3722 *as3722 = as3722_regs->as3722;
+	u8 id = rdev_get_id(dev);
+	u8 val = 0;
+	int ret;
+
+	if (!as3722_reg_lookup[id].control_reg)
+		return -ERANGE;
+
+	switch (mode) {
+	case REGULATOR_MODE_FAST:
+		val = as3722_reg_lookup[id].mode_mask;
+	case REGULATOR_MODE_NORMAL: /* fall down */
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	ret = as3722_update_bits(as3722, as3722_reg_lookup[id].control_reg,
+			as3722_reg_lookup[id].mode_mask, val);
+	if (ret < 0) {
+		dev_err(as3722_regs->dev, "Reg 0x%02x update failed: %d\n",
+			as3722_reg_lookup[id].control_reg, ret);
+		return ret;
+	}
+	return ret;
+}
+
+static int as3722_sd_list_voltage(struct regulator_dev *rdev, unsigned selector)
+{
+	if (selector >= AS3722_SD2_VSEL_MAX)
+		return -EINVAL;
+
+	selector++;
+	if (selector <= 0x40)
+		return 600000 + selector * 12500;
+	if (selector <= 0x70)
+		return 1400000 + (selector - 0x40) * 25000;
+	if (selector <= 0x7F)
+		return 2600000 + (selector - 0x70) * 50000;
+	return -EINVAL;
+}
+
+static struct regulator_ops as3722_sd016_ops = {
+	.is_enabled = regulator_is_enabled_regmap,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.list_voltage = regulator_list_voltage_linear,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_mode = as3722_sd_get_mode,
+	.set_mode = as3722_sd_set_mode,
+};
+
+static struct regulator_ops as3722_sd016_extcntrl_ops = {
+	.list_voltage = regulator_list_voltage_linear,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_mode = as3722_sd_get_mode,
+	.set_mode = as3722_sd_set_mode,
+};
+
+static struct regulator_ops as3722_sd2345_ops = {
+	.is_enabled = regulator_is_enabled_regmap,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.list_voltage = as3722_sd_list_voltage,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_mode = as3722_sd_get_mode,
+	.set_mode = as3722_sd_set_mode,
+};
+
+static struct regulator_ops as3722_sd2345_extcntrl_ops = {
+	.list_voltage = as3722_sd_list_voltage,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_mode = as3722_sd_get_mode,
+	.set_mode = as3722_sd_set_mode,
+};
+
+static int as3722_extreg_init(struct as3722_regulators *as3722_regs, int id,
+		int ext_pwr_ctrl)
+{
+	int ret;
+	unsigned int val;
+
+	if ((ext_pwr_ctrl < AS3722_EXT_CONTROL_ENABLE1) ||
+		(ext_pwr_ctrl > AS3722_EXT_CONTROL_ENABLE3))
+		return -EINVAL;
+
+	val =  ext_pwr_ctrl << (ffs(as3722_reg_lookup[id].sleep_ctrl_mask) - 1);
+	ret = as3722_update_bits(as3722_regs->as3722,
+			as3722_reg_lookup[id].sleep_ctrl_reg,
+			as3722_reg_lookup[id].sleep_ctrl_mask, val);
+	if (ret < 0)
+		dev_err(as3722_regs->dev, "Reg 0x%02x update failed: %d\n",
+			as3722_reg_lookup[id].sleep_ctrl_reg, ret);
+	return ret;
+}
+
+static const int oc_alarm_table[] = {
+	0, 1600, 1800, 2000, 2200, 2400, 2600, 2800
+};
+
+static int as3722_overcurrent_init(struct as3722_regulators *as3722_regs,
+		int id, struct as3722_regulator_config_data *reg_config)
+{
+	int ret;
+	int oc_trip = reg_config->oc_trip_thres_perphase;
+	int oc_alarm = reg_config->oc_alarm_thres_perphase;
+	int mask;
+	int reg;
+	int trip_val;
+	int alarm_val;
+	int i;
+	int val;
+
+	if (oc_trip <= 2500)
+		trip_val = 0;
+	else if (oc_trip <= 3000)
+		trip_val = 1;
+	else
+		trip_val = 2;
+
+	for (i = 0; i < ARRAY_SIZE(oc_alarm_table); ++i) {
+		if (oc_alarm <=  oc_alarm_table[i])
+			break;
+	}
+	alarm_val = i;
+
+	switch (id) {
+	case AS3722_REGULATOR_ID_SD0:
+		mask = AS3722_OVCURRENT_SD0_ALARM_MASK |
+				AS3722_OVCURRENT_SD0_TRIP_MASK;
+		val = (trip_val << AS3722_OVCURRENT_SD0_TRIP_SHIFT) |
+				(alarm_val << AS3722_OVCURRENT_SD0_ALARM_SHIFT);
+		reg = AS3722_OVCURRENT_REG;
+		break;
+
+	case AS3722_REGULATOR_ID_SD1:
+		mask = AS3722_OVCURRENT_SD1_TRIP_MASK;
+		val = (trip_val << AS3722_OVCURRENT_SD1_TRIP_SHIFT);
+		reg = AS3722_OVCURRENT_REG;
+		break;
+
+	case AS3722_REGULATOR_ID_SD6:
+		mask = AS3722_OVCURRENT_SD6_ALARM_MASK |
+				AS3722_OVCURRENT_SD6_TRIP_MASK;
+		val = (trip_val << AS3722_OVCURRENT_SD6_TRIP_SHIFT) |
+				(alarm_val << AS3722_OVCURRENT_SD6_ALARM_SHIFT);
+		reg = AS3722_OVCURRENT_DEB_REG;
+		break;
+	default:
+		return 0;
+	}
+	ret = as3722_update_bits(as3722_regs->as3722, reg, mask, val);
+	if (ret < 0)
+		dev_err(as3722_regs->dev, "Reg 0x%02x update failed %d\n",
+			reg, ret);
+	return ret;
+}
+
+static struct of_regulator_match as3722_regulator_matches[] = {
+	{.name = "sd0", },
+	{.name = "sd1", },
+	{.name = "sd2", },
+	{.name = "sd3", },
+	{.name = "sd4", },
+	{.name = "sd5", },
+	{.name = "sd6", },
+	{.name = "ldo0", },
+	{.name = "ldo1", },
+	{.name = "ldo2", },
+	{.name = "ldo3", },
+	{.name = "ldo4", },
+	{.name = "ldo5", },
+	{.name = "ldo6", },
+	{.name = "ldo7", },
+	{.name = "ldo9", },
+	{.name = "ldo10", },
+	{.name = "ldo11", },
+};
+
+static int as3722_get_regulator_dt_data(struct platform_device *pdev,
+		struct as3722_regulators *as3722_regs)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct as3722_regulator_config_data *reg_config;
+	u32 prop;
+	int id;
+	int ret;
+
+	if (!np) {
+		dev_err(&pdev->dev, "Device does not have regulators node\n");
+		return -ENODEV;
+	}
+
+	ret = of_regulator_match(&pdev->dev, np, as3722_regulator_matches,
+			ARRAY_SIZE(as3722_regulator_matches));
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Parsing of regulator node failed: %d\n",
+			ret);
+		return ret;
+	}
+
+	for (id = 0; id < ARRAY_SIZE(as3722_regulator_matches); ++id) {
+		struct device_node *reg_node;
+
+		reg_config = &as3722_regs->reg_config_data[id];
+		reg_config->reg_init = as3722_regulator_matches[id].init_data;
+		reg_node = as3722_regulator_matches[id].of_node;
+
+		if (!reg_config->reg_init || !reg_node)
+			continue;
+
+		ret = of_property_read_u32(reg_node, "ams,ext-control", &prop);
+		if (!ret) {
+			if (prop < 3)
+				reg_config->ext_control = prop;
+			else
+				dev_warn(&pdev->dev,
+					"ext-control have invalid option: %u\n",
+					prop);
+		}
+		reg_config->enable_tracking =
+			of_property_read_bool(reg_node, "ams,enable-tracking");
+
+		reg_config->enable_oc_configure =
+			of_property_read_bool(reg_node, "ams,enable-oc-config");
+		if (reg_config->enable_oc_configure) {
+			ret = of_property_read_u32(reg_node,
+				    "ams,oc-trip-threshold-perphase", &prop);
+			if (!ret)
+				reg_config->oc_trip_thres_perphase = prop;
+
+			ret = of_property_read_u32(reg_node,
+				    "ams,oc-alarm-threshold-perphase", &prop);
+			if (!ret)
+				reg_config->oc_alarm_thres_perphase = prop;
+		}
+	}
+	return 0;
+}
+
+static int as3722_regulator_probe(struct platform_device *pdev)
+{
+	struct as3722 *as3722 = dev_get_drvdata(pdev->dev.parent);
+	struct as3722_regulators *as3722_regs;
+	struct as3722_regulator_config_data *reg_config;
+	struct regulator_dev *rdev;
+	struct regulator_config config = { };
+	struct regulator_ops *ops;
+	int id;
+	int ret;
+
+	as3722_regs = devm_kzalloc(&pdev->dev, sizeof(*as3722_regs),
+				GFP_KERNEL);
+	if (!as3722_regs) {
+		dev_err(&pdev->dev, "Malloc for as3722_regs failed\n");
+		return -ENOMEM;
+	}
+
+	as3722_regs->dev = &pdev->dev;
+	as3722_regs->as3722 = as3722;
+	platform_set_drvdata(pdev, as3722_regs);
+
+	ret = as3722_get_regulator_dt_data(pdev, as3722_regs);
+	if (ret < 0)
+		return ret;
+
+	config.dev = &pdev->dev;
+	config.driver_data = as3722_regs;
+	config.regmap = as3722->regmap;
+
+	for (id = 0; id < AS3722_REGULATOR_ID_MAX; id++) {
+		reg_config = &as3722_regs->reg_config_data[id];
+
+		if (reg_config->enable_oc_configure) {
+			ret = as3722_overcurrent_init(as3722_regs, id,
+					reg_config);
+			if (ret < 0) {
+				dev_err(&pdev->dev,
+					"OC init for regulator %d failed %d\n",
+					id, ret);
+				return ret;
+			}
+		}
+		as3722_regs->desc[id].name = as3722_reg_lookup[id].name;
+		as3722_regs->desc[id].supply_name = as3722_reg_lookup[id].sname;
+		as3722_regs->desc[id].id = as3722_reg_lookup[id].regulator_id;
+		as3722_regs->desc[id].n_voltages =
+					as3722_reg_lookup[id].n_voltages;
+		as3722_regs->desc[id].type = REGULATOR_VOLTAGE;
+		as3722_regs->desc[id].owner = THIS_MODULE;
+		as3722_regs->desc[id].enable_reg =
+					as3722_reg_lookup[id].enable_reg;
+		as3722_regs->desc[id].enable_mask =
+					as3722_reg_lookup[id].enable_mask;
+		as3722_regs->desc[id].vsel_reg = as3722_reg_lookup[id].vsel_reg;
+		as3722_regs->desc[id].vsel_mask =
+					as3722_reg_lookup[id].vsel_mask;
+		switch (id) {
+		case AS3722_REGULATOR_ID_LDO0:
+			if (reg_config->ext_control)
+				ops = &as3722_ldo0_extcntrl_ops;
+			else
+				ops = &as3722_ldo0_ops;
+			as3722_regs->desc[id].min_uV = 825000;
+			as3722_regs->desc[id].uV_step = 25000;
+			as3722_regs->desc[id].linear_min_sel = 1;
+			as3722_regs->desc[id].enable_time = 500;
+			break;
+		case AS3722_REGULATOR_ID_LDO3:
+			if (reg_config->ext_control)
+				ops = &as3722_ldo3_extcntrl_ops;
+			else
+				ops = &as3722_ldo3_ops;
+			as3722_regs->desc[id].min_uV = 620000;
+			as3722_regs->desc[id].uV_step = 20000;
+			as3722_regs->desc[id].linear_min_sel = 1;
+			as3722_regs->desc[id].enable_time = 500;
+			if (reg_config->enable_tracking) {
+				ret = as3722_ldo3_set_tracking_mode(as3722_regs,
+					id, AS3722_LDO3_MODE_PMOS_TRACKING);
+				if (ret < 0) {
+					dev_err(&pdev->dev,
+						"LDO3 tracking failed: %d\n",
+						ret);
+					goto scrub;
+				}
+			}
+			break;
+		case AS3722_REGULATOR_ID_SD0:
+		case AS3722_REGULATOR_ID_SD1:
+		case AS3722_REGULATOR_ID_SD6:
+			if (reg_config->ext_control)
+				ops = &as3722_sd016_extcntrl_ops;
+			else
+				ops = &as3722_sd016_ops;
+			as3722_regs->desc[id].min_uV = 610000;
+			as3722_regs->desc[id].uV_step = 10000;
+			as3722_regs->desc[id].linear_min_sel = 1;
+			break;
+		case AS3722_REGULATOR_ID_SD2:
+		case AS3722_REGULATOR_ID_SD3:
+		case AS3722_REGULATOR_ID_SD4:
+		case AS3722_REGULATOR_ID_SD5:
+			if (reg_config->ext_control)
+				ops = &as3722_sd2345_extcntrl_ops;
+			else
+				ops = &as3722_sd2345_ops;
+			break;
+		default:
+			if (reg_config->ext_control)
+				ops = &as3722_ldo_extcntrl_ops;
+			else
+				ops = &as3722_ldo_ops;
+			as3722_regs->desc[id].min_uV = 825000;
+			as3722_regs->desc[id].uV_step = 25000;
+			as3722_regs->desc[id].linear_min_sel = 1;
+			as3722_regs->desc[id].enable_time = 500;
+			break;
+		}
+		as3722_regs->desc[id].ops = ops;
+		config.init_data = reg_config->reg_init;
+		config.of_node = as3722_regulator_matches[id].of_node;
+		rdev = regulator_register(&as3722_regs->desc[id], &config);
+		if (IS_ERR(rdev)) {
+			ret = PTR_ERR(rdev);
+			dev_err(&pdev->dev, "regulator %d register failed %d\n",
+				id, ret);
+			goto scrub;
+		}
+
+		as3722_regs->rdevs[id] = rdev;
+		if (reg_config->ext_control) {
+			ret = regulator_enable_regmap(rdev);
+			if (ret < 0) {
+				dev_err(&pdev->dev,
+					"Regulator %d enable failed: %d\n",
+					id, ret);
+				goto scrub;
+			}
+			ret = as3722_extreg_init(as3722_regs, id,
+					reg_config->ext_control);
+			if (ret < 0) {
+				dev_err(&pdev->dev,
+					"AS3722 ext control failed: %d", ret);
+				goto scrub;
+			}
+		}
+	}
+	return 0;
+
+scrub:
+	while (--id > 0)
+		regulator_unregister(as3722_regs->rdevs[id]);
+	return ret;
+}
+
+static int as3722_regulator_remove(struct platform_device *pdev)
+{
+	struct as3722_regulators *as3722_regs = platform_get_drvdata(pdev);
+	int id;
+
+	for (id = 0; id < AS3722_REGULATOR_ID_MAX; id++) {
+		if (as3722_regs->rdevs[id])
+			regulator_unregister(as3722_regs->rdevs[id]);
+	}
+	return 0;
+}
+
+static const struct of_device_id of_as3722_regulator_match[] = {
+	{ .compatible = "ams,as3722-regulator", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, of_as3722_regulator_match);
+
+static struct platform_driver as3722_regulator_driver = {
+	.driver = {
+		.name = "as3722-regulator",
+		.owner = THIS_MODULE,
+		.of_match_table = of_as3722_regulator_match,
+	},
+	.probe = as3722_regulator_probe,
+	.remove = as3722_regulator_remove,
+};
+
+static int __init as3722_regulator_init(void)
+{
+	return platform_driver_register(&as3722_regulator_driver);
+}
+subsys_initcall(as3722_regulator_init);
+
+static void __exit as3722_regulator_exit(void)
+{
+	platform_driver_unregister(&as3722_regulator_driver);
+}
+module_exit(as3722_regulator_exit);
+
+MODULE_ALIAS("platform:as3722-regulator");
+MODULE_DESCRIPTION("AS3722 regulator driver");
+MODULE_AUTHOR("Florian Lobmaier <florian.lobmaier@xxxxxxx>");
+MODULE_AUTHOR("Laxman Dewangan <ldewangan@xxxxxxxxxx>");
+MODULE_LICENSE("GPL");
-- 
1.7.1.1

--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux