> -----Original Message-----
> From: Simon Horman <horms@xxxxxxxxxx>
> Sent: Monday, 22 January 2024 12:31
> To: Danielle Ratson <danieller@xxxxxxxxxx>
> Cc: netdev@xxxxxxxxxxxxxxx; davem@xxxxxxxxxxxxx; edumazet@xxxxxxxxxx;
> kuba@xxxxxxxxxx; pabeni@xxxxxxxxxx; corbet@xxxxxxx;
> linux@xxxxxxxxxxxxxxx; sdf@xxxxxxxxxx; kory.maincent@xxxxxxxxxxx;
> maxime.chevallier@xxxxxxxxxxx; vladimir.oltean@xxxxxxx;
> przemyslaw.kitszel@xxxxxxxxx; ahmed.zaki@xxxxxxxxx;
> richardcochran@xxxxxxxxx; shayagr@xxxxxxxxxx;
> paul.greenwalt@xxxxxxxxx; jiri@xxxxxxxxxxx; linux-doc@xxxxxxxxxxxxxxx; linux-
> kernel@xxxxxxxxxxxxxxx; mlxsw <mlxsw@xxxxxxxxxx>; Petr Machata
> <petrm@xxxxxxxxxx>; Ido Schimmel <idosch@xxxxxxxxxx>
> Subject: Re: [RFC PATCH net-next 7/9] ethtool: cmis_cdb: Add a layer for
> supporting CDB commands
>
> On Mon, Jan 22, 2024 at 10:45:28AM +0200, Danielle Ratson wrote:
>
> ...
>
> > +/**
> > + * struct ethtool_cmis_cdb_request - CDB commands request fields as
> decribed in
> > + * the CMIS standard
> > + * @id: Command ID.
> > + * @epl_len: EPL memory length.
> > + * @lpl_len: LPL memory length.
> > + * @chk_code: Check code for the previous field and the payload.
> > + * @resv1: Added to match the CMIS standard request continuity.
> > + * @resv2: Added to match the CMIS standard request continuity.
> > + * @payload: Payload for the CDB commands.
> > + */
> > +struct ethtool_cmis_cdb_request {
> > + __be16 id;
> > + struct_group(body,
> > + u16 epl_len;
> > + u8 lpl_len;
> > + u8 chk_code;
> > + u8 resv1;
> > + u8 resv2;
> > + u8 payload[ETHTOOL_CMIS_CDB_LPL_MAX_PL_LENGTH];
> > + );
> > +};
> > +
> > +#define CDB_F_COMPLETION_VALID BIT(0)
> > +#define CDB_F_STATUS_VALID BIT(1)
> > +
> > +/**
> > + * struct ethtool_cmis_cdb_cmd_args - CDB commands execution
> > +arguments
> > + * @req: CDB command fields as described in the CMIS standard.
> > + * @max_duration: Maximum duration time for command completion in
> msec.
> > + * @read_write_len_ext: Allowable additional number of byte octets to the
> LPL
> > + * in a READ or a WRITE commands.
> > + * @rpl_exp_len: Expected reply length in bytes.
> > + * @flags: Validation flags for CDB commands.
> > + */
> > +struct ethtool_cmis_cdb_cmd_args {
> > + struct ethtool_cmis_cdb_request req;
> > + u16 max_duration;
> > + u8 read_write_len_ext;
> > + u8 rpl_exp_len;
> > + u8 flags;
> > +};
>
> ...
>
> > +int ethtool_cmis_page_init(struct ethtool_module_eeprom *page_data,
> > + u8 page, u32 offset, u32 length) {
> > + page_data->page = page;
> > + page_data->offset = offset;
> > + page_data->length = length;
> > + page_data->i2c_address = ETHTOOL_CMIS_CDB_PAGE_I2C_ADDR;
> > + page_data->data = kmalloc(page_data->length, GFP_KERNEL);
> > + if (!page_data->data)
> > + return -ENOMEM;
> > +
> > + return 0;
> > +}
>
> ...
>
> > +static int
> > +__ethtool_cmis_cdb_execute_cmd(struct net_device *dev,
> > + struct ethtool_module_eeprom *page_data,
> > + u32 offset, u32 length, void *data) {
> > + const struct ethtool_ops *ops = dev->ethtool_ops;
> > + struct netlink_ext_ack extack = {};
> > + int err;
> > +
> > + page_data->offset = offset;
> > + page_data->length = length;
> > +
> > + memset(page_data->data, 0,
> ETHTOOL_CMIS_CDB_LPL_MAX_PL_LENGTH);
> > + memcpy(page_data->data, data, page_data->length);
> > +
> > + err = ops->set_module_eeprom_by_page(dev, page_data, &extack);
> > + if (err < 0) {
> > + if (extack._msg)
> > + netdev_err(dev, "%s\n", extack._msg);
> > + }
> > +
> > + return err;
> > +}
>
> ...
>
> > +int ethtool_cmis_cdb_execute_cmd(struct net_device *dev,
> > + struct ethtool_cmis_cdb_cmd_args *args) {
> > + struct ethtool_module_eeprom page_data = {};
> > + u32 offset;
> > + int err;
> > +
> > + args->req.chk_code =
> > + cmis_cdb_calc_checksum(&args->req, sizeof(args->req));
> > +
> > + if (args->req.lpl_len > args->read_write_len_ext) {
> > + ethnl_module_fw_flash_ntf_err(dev,
> > + "LPL length is longer than CDB read
> write length extension allows");
> > + return -EINVAL;
> > + }
> > +
> > + err = ethtool_cmis_page_init(&page_data,
> ETHTOOL_CMIS_CDB_CMD_PAGE, 0,
> > +
> ETHTOOL_CMIS_CDB_LPL_MAX_PL_LENGTH);
>
> ETHTOOL_CMIS_CDB_LPL_MAX_PL_LENGTH is passed as the length argument
> of ethtool_cmis_page_init, which will allocate that many bytes for page_data-
> >data.
>
> > + if (err < 0)
> > + return err;
> > +
> > + /* According to the CMIS standard, there are two options to trigger
> the
> > + * CDB commands. The default option is triggering the command by
> writing
> > + * the CMDID bytes. Therefore, the command will be split to 2 calls:
> > + * First, with everything except the CMDID field and then the CMDID
> > + * field.
> > + */
> > + offset = CMIS_CDB_CMD_ID_OFFSET +
> > + offsetof(struct ethtool_cmis_cdb_request, body);
> > + err = __ethtool_cmis_cdb_execute_cmd(dev, &page_data, offset,
> > + sizeof(args->req.body),
> > + &args->req.body);
>
> Hi Danielle,
>
> However, here sizeof(args->req.body) is passed as the length argument of
> __ethtool_cmis_cdb_execute_cmd() which will:
>
> 1. Zero ETHTOOL_CMIS_CDB_LPL_MAX_PL_LENGTH bytes of page_data->data
> 2. Copy sizeof(args->req.body) bytes into page_data->data
>
> args->req.body includes several fields, one of which is
> ETHTOOL_CMIS_CDB_LPL_MAX_PL_LENGTH bytes long. So,
> args->req.body > ETHTOOL_CMIS_CDB_LPL_MAX_PL_LENGTH
> and it seems that step 2 above causes a buffer overrun.
>
> Flagged by clang-17 W=1 build
>
> In file included from net/ethtool/cmis_cdb.c:3:
> In file included from ./include/linux/ethtool.h:16:
> In file included from ./include/linux/bitmap.h:12:
> In file included from ./include/linux/string.h:295:
> ./include/linux/fortify-string.h:579:4: error: call to '__write_overflow_field'
> declared with 'warning' attribute: detected write beyond size of field (1st
> parameter); maybe use struct_group()? [-Werror,-Wattribute-warning]
> 579 | __write_overflow_field(p_size_field, size);
> | ^
> ./include/linux/fortify-string.h:579:4: error: call to '__write_overflow_field'
> declared with 'warning' attribute: detected write beyond size of field (1st
> parameter); maybe use struct_group()? [-Werror,-Wattribute-warning]
> ./include/linux/fortify-string.h:579:4: error: call to '__write_overflow_field'
> declared with 'warning' attribute: detected write beyond size of field (1st
> parameter); maybe use struct_group()? [-Werror,-Wattribute-warning]
>
Hi Simon,
Thanks for the feedback.
Ill fix that, something like:
diff --git a/net/ethtool/cmis_cdb.c b/net/ethtool/cmis_cdb.c
index b27e12871816..888b02e6eade 100644
--- a/net/ethtool/cmis_cdb.c
+++ b/net/ethtool/cmis_cdb.c
@@ -521,7 +521,7 @@ int ethtool_cmis_cdb_execute_cmd(struct net_device *dev,
}
err = ethtool_cmis_page_init(&page_data, ETHTOOL_CMIS_CDB_CMD_PAGE, 0,
- ETHTOOL_CMIS_CDB_LPL_MAX_PL_LENGTH);
+ sizeof(args->req.body));
if (err < 0)
return err;
Danielle
>
> > + if (err < 0)
> > + goto out;
> > +
> > + offset = CMIS_CDB_CMD_ID_OFFSET +
> > + offsetof(struct ethtool_cmis_cdb_request, id);
> > + err = __ethtool_cmis_cdb_execute_cmd(dev, &page_data, offset,
> > + sizeof(args->req.id),
> > + &args->req.id);
> > + if (err < 0)
> > + goto out;
> > +
> > + err = cmis_cdb_wait_for_completion(dev, args);
> > + if (err < 0)
> > + goto out;
> > +
> > + err = cmis_cdb_wait_for_status(dev, args);
> > + if (err < 0)
> > + goto out;
> > +
> > + err = cmis_cdb_process_reply(dev, &page_data, args);
> > +
> > +out:
> > + ethtool_cmis_page_fini(&page_data);
> > + return err;
> > +}
>
> ...
