Re: [RFC PATCH 3/4] pinctrl: at91: improve pinconf_set/get function robustness

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 09:49 Fri 13 Sep     , Boris BREZILLON wrote:
> Reset caller's config variable before setting current config flags to avoid
> erronous config return.
> 
> DEBOUNCE and DEGLITCH options are mutually exclusive. Return an error if they
> are both defined in the config.
> Do not call set_deglitch if DEBOUNCE is enabled to avoid reseting the IFSR
> register (which will result in disabling the debounce filter).
> 
> Signed-off-by: Boris BREZILLON <b.brezillon@xxxxxxxxxxx>
> ---
>  drivers/pinctrl/pinctrl-at91.c |   18 +++++++++++++-----
>  1 file changed, 13 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
> index 6624bce..ac9dbea 100644
> --- a/drivers/pinctrl/pinctrl-at91.c
> +++ b/drivers/pinctrl/pinctrl-at91.c
> @@ -724,6 +724,7 @@ static int at91_pinconf_get(struct pinctrl_dev *pctldev,
>  	dev_dbg(info->dev, "%s:%d, pin_id=%d, config=0x%lx", __func__, __LINE__, pin_id, *config);
>  	pio = pin_to_controller(info, pin_to_bank(pin_id));
>  	pin = pin_id % MAX_NB_GPIO_PER_BANK;
> +	*config = 0;
>  
>  	if (at91_mux_get_multidrive(pio, pin))
>  		*config |= MULTI_DRIVE;
> @@ -757,13 +758,20 @@ static int at91_pinconf_set(struct pinctrl_dev *pctldev,
>  	if (config & PULL_UP && config & PULL_DOWN)
>  		return -EINVAL;
>  
> -	at91_mux_set_pullup(pio, mask, config & PULL_UP);
> -	at91_mux_set_multidrive(pio, mask, config & MULTI_DRIVE);
> -	if (info->ops->set_deglitch)
> -		info->ops->set_deglitch(pio, mask, config & DEGLITCH);
> -	if (info->ops->set_debounce)
> +	if (config & DEBOUNCE && config & DEGLITCH)
> +		return -EINVAL;
here ok
> +
> +	if (config & DEBOUNCE) {
> +		if (!info->ops->set_debounce)
> +			return -ENOTSUPP;
a warning is better here than an error
> +
>  		info->ops->set_debounce(pio, mask, config & DEBOUNCE,
>  				(config & DEBOUNCE_VAL) >> DEBOUNCE_VAL_SHIFT);
> +	} else if (info->ops->set_deglitch)
> +		info->ops->set_deglitch(pio, mask, config & DEGLITCH);
> +


> +	at91_mux_set_pullup(pio, mask, config & PULL_UP);
> +	at91_mux_set_multidrive(pio, mask, config & MULTI_DRIVE);

>  	if (info->ops->set_pulldown)
>  		info->ops->set_pulldown(pio, mask, config & PULL_DOWN);
>  	if (info->ops->disable_schmitt_trig && config & DIS_SCHMIT)
> -- 
> 1.7.9.5
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux