[RFC PATCH 3/4] pinctrl: at91: improve pinconf_set/get function robustness

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Reset caller's config variable before setting current config flags to avoid
erronous config return.

DEBOUNCE and DEGLITCH options are mutually exclusive. Return an error if they
are both defined in the config.
Do not call set_deglitch if DEBOUNCE is enabled to avoid reseting the IFSR
register (which will result in disabling the debounce filter).

Signed-off-by: Boris BREZILLON <b.brezillon@xxxxxxxxxxx>
---
 drivers/pinctrl/pinctrl-at91.c |   18 +++++++++++++-----
 1 file changed, 13 insertions(+), 5 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
index 6624bce..ac9dbea 100644
--- a/drivers/pinctrl/pinctrl-at91.c
+++ b/drivers/pinctrl/pinctrl-at91.c
@@ -724,6 +724,7 @@ static int at91_pinconf_get(struct pinctrl_dev *pctldev,
 	dev_dbg(info->dev, "%s:%d, pin_id=%d, config=0x%lx", __func__, __LINE__, pin_id, *config);
 	pio = pin_to_controller(info, pin_to_bank(pin_id));
 	pin = pin_id % MAX_NB_GPIO_PER_BANK;
+	*config = 0;
 
 	if (at91_mux_get_multidrive(pio, pin))
 		*config |= MULTI_DRIVE;
@@ -757,13 +758,20 @@ static int at91_pinconf_set(struct pinctrl_dev *pctldev,
 	if (config & PULL_UP && config & PULL_DOWN)
 		return -EINVAL;
 
-	at91_mux_set_pullup(pio, mask, config & PULL_UP);
-	at91_mux_set_multidrive(pio, mask, config & MULTI_DRIVE);
-	if (info->ops->set_deglitch)
-		info->ops->set_deglitch(pio, mask, config & DEGLITCH);
-	if (info->ops->set_debounce)
+	if (config & DEBOUNCE && config & DEGLITCH)
+		return -EINVAL;
+
+	if (config & DEBOUNCE) {
+		if (!info->ops->set_debounce)
+			return -ENOTSUPP;
+
 		info->ops->set_debounce(pio, mask, config & DEBOUNCE,
 				(config & DEBOUNCE_VAL) >> DEBOUNCE_VAL_SHIFT);
+	} else if (info->ops->set_deglitch)
+		info->ops->set_deglitch(pio, mask, config & DEGLITCH);
+
+	at91_mux_set_pullup(pio, mask, config & PULL_UP);
+	at91_mux_set_multidrive(pio, mask, config & MULTI_DRIVE);
 	if (info->ops->set_pulldown)
 		info->ops->set_pulldown(pio, mask, config & PULL_DOWN);
 	if (info->ops->disable_schmitt_trig && config & DIS_SCHMIT)
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux