Re: [PATCH 2/2] regulator: core: add support for configuring turn-on time through constraints

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tuesday 10 September 2013 05:39 PM, Mark Brown wrote:
* PGP Signed by an unknown key

On Tue, Sep 10, 2013 at 04:48:08PM +0530, Laxman Dewangan wrote:

+- regulator-enable-time: Turn ON time for regulator(in uS)
This is unclear - what is a "turn on time" and is this in addition to or
separate from the underlying enable time of the device?  It needs to be
clear that this is the time taken for the voltage to ramp to spec.  I'd
also expect it to be clear that this is not something that should need
to be provided normally.

Here my intention for turn-on time is the time from OFF state to ON state and the ON voltage settled on this time. This time is separate from underlying enable time of the device i.e. will not get added. We observe in some of platform that some of regulator is taking more time than time given as per datasheet. Yes, completely agree that this is not the data provided normally, just we observe on scope that some of platform shows more than the datasheet value and hence this patch.

The same rail on other design does not show the enable time more than datasheet and on that case, we will not provide this value.



Please ALSO avoid capitalising words FOR no reason.


My bad, will take care.
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux