Re: [PATCH v14 06/25] mailbox: Add Gunyah message queue mailbox

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jun 13, 2023 at 12:21 PM Elliot Berman <quic_eberman@xxxxxxxxxxx> wrote:
......

> diff --git a/drivers/mailbox/gunyah-msgq.c b/drivers/mailbox/gunyah-msgq.c
> new file mode 100644
> index 0000000000000..7f777339278eb
> --- /dev/null
> +++ b/drivers/mailbox/gunyah-msgq.c
> @@ -0,0 +1,219 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +#include <linux/mailbox_controller.h>
> +#include <linux/module.h>
> +#include <linux/interrupt.h>
> +#include <linux/gunyah.h>
> +#include <linux/printk.h>
> +#include <linux/init.h>
> +#include <linux/slab.h>
> +#include <linux/wait.h>
> +
I believe some includes could be removed without issue.

>
> +#define mbox_chan_to_msgq(chan) (container_of(chan->mbox, struct gh_msgq, mbox))
> +
container_of need not be in brackets.

> +static irqreturn_t gh_msgq_rx_irq_handler(int irq, void *data)
> +{
> +       struct gh_msgq *msgq = data;
> +       struct gh_msgq_rx_data rx_data;
> +       enum gh_error gh_error;
> +       bool ready = true;
> +
Please limit the scope of rx_data and gh_error by moving them inside
the while() body.

> +       while (ready) {
> +               gh_error = gh_hypercall_msgq_recv(msgq->rx_ghrsc->capid,
> +                               &rx_data.data, sizeof(rx_data.data),
> +                               &rx_data.length, &ready);
> +               if (gh_error != GH_ERROR_OK) {
> +                       if (gh_error != GH_ERROR_MSGQUEUE_EMPTY)
> +                               dev_warn(msgq->mbox.dev, "Failed to receive data: %d\n", gh_error);
> +                       break;
> +               }
> +               if (likely(gh_msgq_chan(msgq)->cl))
> +                       mbox_chan_received_data(gh_msgq_chan(msgq), &rx_data);
> +       }
> +
> +       return IRQ_HANDLED;
> +}
> +


> +static int gh_msgq_send_data(struct mbox_chan *chan, void *data)
> +{
> +       struct gh_msgq *msgq = mbox_chan_to_msgq(chan);
> +       struct gh_msgq_tx_data *msgq_data = data;
> +       u64 tx_flags = 0;
> +       enum gh_error gh_error;
> +       bool ready;
> +
> +       if (!msgq->tx_ghrsc)
> +               return -EOPNOTSUPP;
> +
If we hit this error, the fix will still be in the upper layer.
So please drop the check and, if needed, add one in the client driver.


> +       if (msgq_data->push)
> +               tx_flags |= GH_HYPERCALL_MSGQ_TX_FLAGS_PUSH;
> +
> +       gh_error = gh_hypercall_msgq_send(msgq->tx_ghrsc->capid, msgq_data->length, msgq_data->data,
> +                                               tx_flags, &ready);
> +
> +       /**
> +        * unlikely because Linux tracks state of msgq and should not try to
> +        * send message when msgq is full.
> +        */
> +       if (unlikely(gh_error == GH_ERROR_MSGQUEUE_FULL))
> +               return -EAGAIN;
> +
If it is not expected to hit, please remove the check.
If there can be a 'race' like situation, still remove this and try to
find an appropriate place to avoid the race.

> +       /**
> +        * Propagate all other errors to client. If we return error to mailbox
> +        * framework, then no other messages can be sent and nobody will know
> +        * to retry this message.
> +        */
> +       msgq->last_ret = gh_error_remap(gh_error);
> +
> +       /**
> +        * This message was successfully sent, but message queue isn't ready to
> +        * accept more messages because it's now full. Mailbox framework
> +        * requires that we only report that message was transmitted when
> +        * we're ready to transmit another message. We'll get that in the form
> +        * of tx IRQ once the other side starts to drain the msgq.
> +        */
> +       if (gh_error == GH_ERROR_OK) {
> +               if (!ready)
> +                       return 0;
> +       } else {
> +               dev_err(msgq->mbox.dev, "Failed to send data: %d (%d)\n", gh_error, msgq->last_ret);
> +       }
> +
> +       /**
> +        * We can send more messages.
>
            ... until we can not (when the platform specific queue is full).

>             Mailbox framework requires that tx done
> +        * happens asynchronously to sending the message.
>
hence the mailbox api needs to track each transfer's stage.

>             Gunyah message queues
> +        * tell us right away on the hypercall return whether we can send more
> +        * messages. To work around this, defer the txdone to a tasklet.
> +        */
>
If not here, you would still have to put the 'defer' somewhere in the
upper layer.
So it is not exactly a "workaround".

> +       tasklet_schedule(&msgq->txdone_tasklet);
> +
> +       return 0;
> +}
> +


> diff --git a/include/linux/gunyah.h b/include/linux/gunyah.h
> index 01a6f202d037e..982e27d10d57f 100644
> --- a/include/linux/gunyah.h
> +++ b/include/linux/gunyah.h
> @@ -8,11 +8,68 @@
>
>  #include <linux/bitfield.h>
>  #include <linux/errno.h>
> +#include <linux/interrupt.h>
>  #include <linux/limits.h>
> +#include <linux/mailbox_controller.h>
> +#include <linux/mailbox_client.h>
>  #include <linux/types.h>
>
controller.h and client.h aren't supposed to be in the same header.
The Client and the Controller driver could include them respectively
before this header.

Cheers.




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux