Re: [PATCH v4 2/3] usb: phy: Add Qualcomm SS-USB and HS-USB drivers for DWC3 core

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 2013-08-20 at 10:01 -0500, Kumar Gala wrote: 
> On Aug 20, 2013, at 9:54 AM, Ivan T. Ivanov wrote:
> 
> > 
> > Hi, 
> > 
> > On Tue, 2013-08-20 at 09:33 -0500, Felipe Balbi wrote: 
> >> On Tue, Aug 20, 2013 at 05:09:11PM +0300, Ivan T. Ivanov wrote:
> >>> Hi,
> >>> 
> >>> On Tue, 2013-08-20 at 08:37 -0500, Felipe Balbi wrote: 
> >>>> Hi,
> >>>> 
> >>>> On Tue, Aug 20, 2013 at 04:32:23PM +0300, Ivan T. Ivanov wrote:
> >>>>>> On Tue, Aug 20, 2013 at 12:56:04PM +0300, Ivan T. Ivanov wrote:
> >>>>>>> From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
> >>>>>>> 
> >>>>>>> These drivers handles control and configuration of the HS
> >>>>>>> and SS USB PHY transceivers. They are part of the driver
> >>>>>>> which manage Synopsys DesignWare USB3 controller stack
> >>>>>>> inside Qualcomm SoC's.
> >>>>>>> 
> >>>>>>> Signed-off-by: Ivan T. Ivanov <iivanov@xxxxxxxxxx>
> >>>>>>> ---
> >>>>>>> drivers/usb/phy/Kconfig           |   11 ++
> >>>>>>> drivers/usb/phy/Makefile          |    2 +
> >>>>>>> drivers/usb/phy/phy-msm-dwc3-hs.c |  327 ++++++++++++++++++++++++++++++++
> >>>>>>> drivers/usb/phy/phy-msm-dwc3-ss.c |  374 +++++++++++++++++++++++++++++++++++++
> >>>>>> 
> >>>>>> please rename these PHY drivers, they have nothing to do with DWC3. PHYs
> >>>>>> don't care about the USB controller.
> >>>>> 
> >>>>> I think they are SNPS DesignWare PHY's, additionally
> >>>>> wrapped with Qualcomm logic. I could substitute "dwc3"
> >>>>> with just "dw", which will be more correct.
> >>>> 
> >>>> alright, thank you. Let's add Paul to the loop since he might have very
> >>>> good insight in the synopsys PHYs.
> >>>> 
> >>>> mental note: if any other platform shows up with Synopsys PHY, ask them
> >>>> to use this driver instead :-)
> >>> 
> >>> I really doubt that this will bi possible. Control of the PHY's is
> >>> not directly trough ULPI, UTMI or PIPE3 interfaces, but trough
> >>> QSCRATCH registers, which of course is highly Qualcomm specific.
> >> 
> >> isn't it a memory mapped IP ? doesn't synopsys provide their own set of
> >> registers ?
> > 
> > From what I see it is not directly mapped. How QSCRATCH write and
> > reads transactions are translated to DW IP is unclear to me.
> 
> 
> I think the question is how does SW access them?

"USB QSCRATCH Hardware registers" don't ask me what is this :-)
or like Pawel says: "it depends on the SOC" .

Ivan

> 
> - k
> 


--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux