On Wed, Mar 15, 2023 at 12:07:33PM +0100, Julien Panis wrote: > TPS6594 is a Power Management IC which provides regulators and others > features like GPIOs, RTC, watchdog, ESMs (Error Signal Monitor), and > PFSM (Pre-configurable Finite State Machine) managing the state of the > device. > TPS6594 is the super-set device while TPS6593 and LP8764X are derivatives. As mentioned, the binding needs to be complete. It's missing GPIO at least. RTC and watchdog may or may not need binding changes. > > Signed-off-by: Julien Panis <jpanis@xxxxxxxxxxxx> > --- > .../devicetree/bindings/mfd/ti,tps6594.yaml | 191 ++++++++++++++++++ > 1 file changed, 191 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mfd/ti,tps6594.yaml > > diff --git a/Documentation/devicetree/bindings/mfd/ti,tps6594.yaml b/Documentation/devicetree/bindings/mfd/ti,tps6594.yaml > new file mode 100644 > index 000000000000..18f47cd6a2f9 > --- /dev/null > +++ b/Documentation/devicetree/bindings/mfd/ti,tps6594.yaml > @@ -0,0 +1,191 @@ > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/mfd/ti,tps6594.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: TI TPS6594 Power Management Integrated Circuit > + > +maintainers: > + - Julien Panis <jpanis@xxxxxxxxxxxx> > + > +description: | Don't need '|'. > + TPS6594 is a Power Management IC which provides regulators and others > + features like GPIOs, RTC, watchdog, ESMs (Error Signal Monitor), and > + PFSM (Pre-configurable Finite State Machine) managing the state of the device. > + TPS6594 is the super-set device while TPS6593 and LP8764X are derivatives. > + > +properties: > + compatible: > + enum: > + - ti,lp8764x > + - ti,tps6593 > + - ti,tps6594 > + > + reg: > + description: I2C slave address or SPI chip select number. > + maxItems: 1 > + > + ti,spmi-controller: > + type: boolean > + description: | > + Identify the primary PMIC on SPMI bus. Perhaps the property name should include 'primary' and 'pmic'. Otherwise, it looks like it is just marked as 'a SPMI controller'. > + A multi-PMIC synchronization scheme is implemented in the PMIC device > + to synchronize the power state changes with other PMIC devices. This is > + accomplished through a SPMI bus: the primary PMIC is the controller > + device on the SPMI bus, and the secondary PMICs are the target devices > + on the SPMI bus. Is this a TI specific feature? > + > + system-power-controller: true > + > + interrupts: > + maxItems: 1 > + > + ti,multi-phase-id: > + description: | > + Describes buck multi-phase configuration, if any. For instance, XY id means > + that outputs of buck converters X and Y are combined in multi-phase mode. > + $ref: /schemas/types.yaml#/definitions/uint32 > + enum: [12, 34, 123, 1234] coupled regulator stuff doesn't work here? > + > + regulators: > + type: object > + description: List of regulators provided by this controller. > + > + patternProperties: > + "^buck([1-5]|12|34|123|1234)$": > + type: object > + $ref: /schemas/regulator/regulator.yaml# > + > + unevaluatedProperties: false > + > + "^ldo[1-4]$": > + type: object > + $ref: /schemas/regulator/regulator.yaml# > + > + unevaluatedProperties: false > + > + allOf: > + - if: > + required: > + - buck12 > + then: > + properties: > + buck123: false > + buck1234: false > + - if: > + required: > + - buck123 > + then: > + properties: > + buck34: false > + - if: > + required: > + - buck1234 > + then: > + properties: > + buck34: false > + > + additionalProperties: false > + > +patternProperties: > + "^buck([1-5]|12|34|123|1234)-supply$": > + description: Input supply phandle for each buck. > + > + "^ldo[1-4]-supply$": > + description: Input supply phandle for each ldo. > + > +required: > + - compatible > + - reg > + - interrupts > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + > + tps6593: pmic@48 { > + compatible = "ti,tps6593"; > + reg = <0x48>; > + ti,spmi-controller; > + system-power-controller; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&pmic_irq_pins_default>; > + interrupt-parent = <&mcu_gpio0>; > + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; > + > + ti,multi-phase-id = <123>; > + > + buck123-supply = <&vcc_3v3_sys>; > + buck4-supply = <&vcc_3v3_sys>; > + buck5-supply = <&vcc_3v3_sys>; > + ldo1-supply = <&vcc_3v3_sys>; > + ldo2-supply = <&vcc_3v3_sys>; > + ldo3-supply = <&buck5>; > + ldo4-supply = <&vcc_3v3_sys>; > + > + regulators { > + buck123: buck123 { > + regulator-name = "vcc_core"; > + regulator-min-microvolt = <750000>; > + regulator-max-microvolt = <850000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + buck4: buck4 { > + regulator-name = "vcc_1v1"; > + regulator-min-microvolt = <1100000>; > + regulator-max-microvolt = <1100000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + buck5: buck5 { > + regulator-name = "vcc_1v8_sys"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + ldo1: ldo1 { > + regulator-name = "vddshv5_sdio"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + ldo2: ldo2 { > + regulator-name = "vpp_1v8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + ldo3: ldo3 { > + regulator-name = "vcc_0v85"; > + regulator-min-microvolt = <850000>; > + regulator-max-microvolt = <850000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + ldo4: ldo4 { > + regulator-name = "vdda_1v8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + }; > + }; > + }; > -- > 2.37.3 >
