[PATCH v2 4/6] Documentation: amd_pstate: Move amd_pstate param to alphabetical order

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Move amd_pstate command line param description to correct alphabetical
order.

Signed-off-by: Wyes Karny <wyes.karny@xxxxxxx>
---
 .../admin-guide/kernel-parameters.txt         | 46 +++++++++----------
 1 file changed, 23 insertions(+), 23 deletions(-)

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 0d8486325c9a..5f6a3a34251e 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -339,6 +339,29 @@
 			             This mode requires kvm-amd.avic=1.
 			             (Default when IOMMU HW support is present.)
 
+	amd_pstate=	[X86]
+			disable
+			  Do not enable amd_pstate as the default
+			  scaling driver for the supported processors
+			passive
+			  Use amd_pstate with passive mode as a scaling driver.
+			  In this mode autonomous selection is disabled.
+			  Driver requests a desired performance level and platform
+			  tires to match the same performance level (if it is
+			  satisfied by guaranteed performance level).
+			active
+			  Use amd_pstate_epp driver instance as the scaling driver,
+			  driver provides a hint to the hardware if software wants
+			  to bias toward performance (0x0) or energy efficiency (0xff)
+			  to the CPPC firmware. then CPPC power algorithm will
+			  calculate the runtime workload and adjust the realtime cores
+			  frequency.
+			guided
+			  Activate guided autonomous mode. Driver requests minimum and
+			  maximum performance level and the platform autonomously
+			  selects a performance level in this range and appropriate
+			  to the current workload.
+
 	amijoy.map=	[HW,JOY] Amiga joystick support
 			Map of devices attached to JOY0DAT and JOY1DAT
 			Format: <a>,<b>
@@ -7009,26 +7032,3 @@
 				memory, and other data can't be written using
 				xmon commands.
 			off	xmon is disabled.
-
-	amd_pstate=	[X86]
-			disable
-			  Do not enable amd_pstate as the default
-			  scaling driver for the supported processors
-			passive
-			  Use amd_pstate with passive mode as a scaling driver.
-			  In this mode autonomous selection is disabled.
-			  Driver requests a desired performance level and platform
-			  tires to match the same performance level (if it is
-			  satisfied by guaranteed performance level).
-			active
-			  Use amd_pstate_epp driver instance as the scaling driver,
-			  driver provides a hint to the hardware if software wants
-			  to bias toward performance (0x0) or energy efficiency (0xff)
-			  to the CPPC firmware. then CPPC power algorithm will
-			  calculate the runtime workload and adjust the realtime cores
-			  frequency.
-			guided
-			  Activate guided autonomous mode. Driver requests minimum and
-			  maximum performance level and the platform autonomously
-			  selects a performance level in this range and appropriate
-			  to the current workload.
-- 
2.34.1




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux