On 9/7/22 23:13, Duke Du wrote:
From: Duke Du <dukedu83@xxxxxxxxx>
Add the pmbus driver for TEXAS tps546d24 Buck Converter.
The vout mode of tps546d24 supported relative data format,
which is not meet for the original driver (pmbus.c).
"which is not supported by the PMBus core"
Signed-off-by: Duke Du <dukedu83@xxxxxxxxx>
---
Change in v1:
Initial patchset.
Change in v2:
Correct the tps546d24.rst format.
Change in v3:
1. Modify the patch description.
2. Put the change log between the dashes and diffstat.
Change in v4:
1. Modify the patch description.
2. Clear the bit 7 of PMBUS_VOUT_MODE to change the mode from relative
to absolute.
3. Add the vendor prefix.
---
---
Documentation/hwmon/index.rst | 1 +
Documentation/hwmon/tps546d24.rst | 35 ++++++++++++++++++++++
MAINTAINERS | 7 +++++
drivers/hwmon/pmbus/Kconfig | 9 ++++++
drivers/hwmon/pmbus/Makefile | 1 +
drivers/hwmon/pmbus/tps546d24.c | 63 +++++++++++++++++++++++++++++++++++++++
6 files changed, 116 insertions(+)
create mode 100644 Documentation/hwmon/tps546d24.rst
create mode 100644 drivers/hwmon/pmbus/tps546d24.c
diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
index f7113b0..d3eede4 100644
--- a/Documentation/hwmon/index.rst
+++ b/Documentation/hwmon/index.rst
@@ -205,6 +205,7 @@ Hardware Monitoring Kernel Drivers
tps23861
tps40422
tps53679
+ tps546d24
twl4030-madc-hwmon
ucd9000
ucd9200
diff --git a/Documentation/hwmon/tps546d24.rst b/Documentation/hwmon/tps546d24.rst
new file mode 100644
index 0000000..3061fd8
--- /dev/null
+++ b/Documentation/hwmon/tps546d24.rst
@@ -0,0 +1,35 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+
+Kernel driver tps546d24
+======================
+
+Supported chips:
+
+ * TI TPS546D24
+
+ Prefix: 'tps546d24'
+
+ Addresses scanned: -
+
+ Datasheet: https://www.ti.com/lit/gpn/tps546d24
+
+Author: Duke Du <dukedu83@xxxxxxxxx>
+
+
+Description
+-----------
+
+The TPS546D24A is a highly integrated, non-isolated DC/DC converter capable
+of high frequency operation and 40-A current output from a 7-mm x 5-mm
+package.
+
+Two, three, and four TPS546D24A devices can be interconnected
+to provide up to 160 A on a single output. The device has an option to
+overdrive the internal 5-V LDO with an external 5-V supply via the VDD5
+pin to improve efficiency and reduce power dissipation of the converter.
+
+
+Platform data support
+---------------------
+
+The driver supports standard PMBus driver platform data.
diff --git a/MAINTAINERS b/MAINTAINERS
index 8a5012b..fa2d4fb 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -20583,6 +20583,13 @@ Q: https://patchwork.kernel.org/project/linux-integrity/list/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd.git
F: drivers/char/tpm/
+TPS546D24 DRIVER
+M: Duke Du <dukedu83@xxxxxxxxx>
+L: linux-hwmon@xxxxxxxxxxxxxxx
+S: Maintained
+F: Documentation/hwmon/tps546d24.rst
+F: drivers/hwmon/pmbus/tps546d24.c
+
TRACING
M: Steven Rostedt <rostedt@xxxxxxxxxxx>
M: Ingo Molnar <mingo@xxxxxxxxxx>
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index 951e4a9..89668af 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -397,6 +397,15 @@ config SENSORS_TPS53679
This driver can also be built as a module. If so, the module will
be called tps53679.
+config SENSORS_TPS546D24
+ tristate "TPS546D24"
+ help
+ If you say yes here you get hardware monitoring support for TEXAS
+ TPS546D24.
+
+ This driver can also be built as a module. If so, the module will
+ be called tps546d24
+
config SENSORS_UCD9000
tristate "TI UCD90120, UCD90124, UCD90160, UCD90320, UCD9090, UCD90910"
help
diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
index e2fe86f..0002dbe 100644
--- a/drivers/hwmon/pmbus/Makefile
+++ b/drivers/hwmon/pmbus/Makefile
@@ -41,6 +41,7 @@ obj-$(CONFIG_SENSORS_Q54SJ108A2) += q54sj108a2.o
obj-$(CONFIG_SENSORS_STPDDC60) += stpddc60.o
obj-$(CONFIG_SENSORS_TPS40422) += tps40422.o
obj-$(CONFIG_SENSORS_TPS53679) += tps53679.o
+obj-$(CONFIG_SENSORS_TPS546D24) += tps546d24.o
obj-$(CONFIG_SENSORS_UCD9000) += ucd9000.o
obj-$(CONFIG_SENSORS_UCD9200) += ucd9200.o
obj-$(CONFIG_SENSORS_XDPE122) += xdpe12284.o
diff --git a/drivers/hwmon/pmbus/tps546d24.c b/drivers/hwmon/pmbus/tps546d24.c
new file mode 100644
index 0000000..84f3dc9
--- /dev/null
+++ b/drivers/hwmon/pmbus/tps546d24.c
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Hardware monitoring driver for TEXAS TPS546D24 buck converter
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pmbus.h>
+#include "pmbus.h"
+
+static struct pmbus_driver_info tps546d24_info = {
+ .pages = 1,
+ .format[PSC_VOLTAGE_IN] = linear,
+ .format[PSC_VOLTAGE_OUT] = linear,
+ .format[PSC_TEMPERATURE] = linear,
+ .format[PSC_CURRENT_OUT] = linear,
+ .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN
+ | PMBUS_HAVE_IOUT | PMBUS_HAVE_VOUT
+ | PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_STATUS_VOUT
+ | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+};
+
+static int tps546d24_probe(struct i2c_client *client)
+{
+ int reg;
+
+ reg = i2c_smbus_read_byte_data(client, PMBUS_VOUT_MODE);
+ if (reg > 0x80)
This does not cover reg == 0x80, and does not handle errors.
I would suggest something like
if (reg < 0)
return reg;
if (reg & 0x80) {
int err;
err = i2c_smbus_write_byte_data(client, PMBUS_VOUT_MODE, reg & 0x7f);
if (err < 0)
return err;
}
return pmbus_do_probe(client, &tps546d24_info);
Thanks,
Guenter
+ i2c_smbus_write_byte_data(client, PMBUS_VOUT_MODE, reg & 0x7f);
+ return pmbus_do_probe(client, &tps546d24_info);
+}
+
+static const struct i2c_device_id tps546d24_id[] = {
+ {"tps546d24", 0},
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, tps546d24_id);
+
+static const struct of_device_id tps546d24_of_match[] = {
+ {.compatible = "ti,tps546d24"},
+ {}
+};
+MODULE_DEVICE_TABLE(of, tps546d24_of_match);
+
+/* This is the driver that will be inserted */
+static struct i2c_driver tps546d24_driver = {
+ .driver = {
+ .name = "tps546d24",
+ .of_match_table = of_match_ptr(tps546d24_of_match),
+ },
+ .probe_new = tps546d24_probe,
+ .id_table = tps546d24_id,
+};
+
+module_i2c_driver(tps546d24_driver);
+
+MODULE_AUTHOR("Duke Du <dukedu83@xxxxxxxxx>");
+MODULE_DESCRIPTION("PMBus driver for TI tps546d24");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
