On Tue, 4 Jun 2013 14:11:49 +0530, J Keerthy <j-keerthy@xxxxxx> wrote: > From: Graeme Gregory <gg@xxxxxxxxxxxxxxx> > > Add the various binding files for the palmas family of chips. There is a > top level MFD binding then a seperate binding for regulators IP blocks on chips. > > Signed-off-by: Graeme Gregory <gg@xxxxxxxxxxxxxxx> > Signed-off-by: J Keerthy <j-keerthy@xxxxxx> > Signed-off-by: Ian Lartey <ian@xxxxxxxxxxxxxxx> Applied, thanks. g. > --- > Changes from v1: > * Corrected ti,ldo6_vibrator property ---> ti,ldo6-vibrator > * Added the irq.h header file inclusion for defining type of interrupt > > Documentation/devicetree/bindings/mfd/palmas.txt | 49 +++++++++++++++ > .../devicetree/bindings/regulator/palmas-pmic.txt | 65 ++++++++++++++++++++ > 2 files changed, 114 insertions(+), 0 deletions(-) > create mode 100644 Documentation/devicetree/bindings/mfd/palmas.txt > create mode 100644 Documentation/devicetree/bindings/regulator/palmas-pmic.txt > > diff --git a/Documentation/devicetree/bindings/mfd/palmas.txt b/Documentation/devicetree/bindings/mfd/palmas.txt > new file mode 100644 > index 0000000..c6c5e78 > --- /dev/null > +++ b/Documentation/devicetree/bindings/mfd/palmas.txt > @@ -0,0 +1,49 @@ > +* palmas device tree bindings > + > +The TI palmas family current members :- > +twl6035 (palmas) > +twl6037 (palmas) > +tps65913 (palmas) > +tps65914 (palmas) > + > +Required properties: > +- compatible : Should be from the list > + ti,twl6035 > + ti,twl6036 > + ti,twl6037 > + ti,tps65913 > + ti,tps65914 > + ti,tps80036 > +and also the generic series names > + ti,palmas > +- interrupt-controller : palmas has its own internal IRQs > +- #interrupt-cells : should be set to 2 for IRQ number and flags > + The first cell is the IRQ number. > + The second cell is the flags, encoded as the trigger masks from > + Documentation/devicetree/bindings/interrupts.txt > +- interrupt-parent : The parent interrupt controller. > + > +Optional properties: > + ti,mux_padX : set the pad register X (1-2) to the correct muxing for the > + hardware, if not set will use muxing in OTP. > + > +Example: > + > +palmas { > + compatible = "ti,twl6035", "ti,palmas"; > + reg = <0x48> > + interrupt-parent = <&intc>; > + interrupt-controller; > + #interrupt-cells = <2>; > + > + ti,mux-pad1 = <0>; > + ti,mux-pad2 = <0>; > + > + #address-cells = <1>; > + #size-cells = <0>; > + > + pmic { > + compatible = "ti,twl6035-pmic", "ti,palmas-pmic"; > + .... > + }; > +} > diff --git a/Documentation/devicetree/bindings/regulator/palmas-pmic.txt b/Documentation/devicetree/bindings/regulator/palmas-pmic.txt > new file mode 100644 > index 0000000..a0ccdf2 > --- /dev/null > +++ b/Documentation/devicetree/bindings/regulator/palmas-pmic.txt > @@ -0,0 +1,65 @@ > +* palmas regulator IP block devicetree bindings > + > +Required properties: > +- compatible : Should be from the list > + ti,twl6035-pmic > + ti,twl6036-pmic > + ti,twl6037-pmic > + ti,tps65913-pmic > + ti,tps65914-pmic > +and also the generic series names > + ti,palmas-pmic > + > +Optional properties: > +- ti,ldo6-vibrator : ldo6 is in vibrator mode > + > +Optional nodes: > +- regulators : should contain the constrains and init information for the > + regulators. It should contain a subnode per regulator from the > + list. > + For ti,palmas-pmic - smps12, smps123, smps3 depending on OTP, > + smps45, smps457, smps7 depending on varient, smps6, smps[8-10], > + ldo[1-9], ldoln, ldousb > + > + optional chip specific regulator fields :- > + ti,warm-reset - maintain voltage during warm reset(boolean) > + ti,roof-floor - control voltage selection by pin(boolean) > + ti,sleep-mode - mode to adopt in pmic sleep 0 - off, 1 - auto, > + 2 - eco, 3 - forced pwm > + ti,tstep - slope control 0 - Jump, 1 10mV/us, 2 5mV/us, 3 2.5mV/us > + ti,smps-range - OTP has the wrong range set for the hardware so override > + 0 - low range, 1 - high range > + > +Example: > + > +#include <include/dt-bindings/interrupt-controller/irq.h> > + > +pmic { > + compatible = "ti,twl6035-pmic", "ti,palmas-pmic"; > + interrupt-parent = <&palmas>; > + interrupts = <14 IRQ_TYPE_NONE>; > + interrupt-name = "short-irq"; > + > + ti,ldo6-vibrator; > + > + regulators { > + smps12_reg : smps12 { > + regulator-name = "smps12"; > + regulator-min-microvolt = < 600000>; > + regulator-max-microvolt = <1500000>; > + regulator-always-on; > + regulator-boot-on; > + ti,warm-reset; > + ti,roof-floor; > + ti,mode-sleep = <0>; > + ti,tstep = <0>; > + ti,smps-range = <1>; > + }; > + > + ldo1_reg: ldo1 { > + regulator-name = "ldo1"; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > + }; > + }; > +}; > -- > 1.7.5.4 > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ -- Grant Likely, B.Sc, P.Eng. Secret Lab Technologies, Ltd. -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html