Mark Brown <broonie@xxxxxxxxxx> 于2021年12月6日周一 21:24写道： > > On Sun, Dec 05, 2021 at 09:15:03PM +0800, Yanteng Si wrote: > > > * REGULATOR_SEVERITY_PROT should automatically shut down the regulator(s). > > * REGULATOR_SEVERITY_ERR should indicate that over-current situation is > > - * caused by an unrecoverable error but HW does not perform > > - * automatic shut down. > > - * REGULATOR_SEVERITY_WARN should indicate situation where hardware is > > - * still believed to not be damaged but that a board sepcific > > - * recovery action is needed. If lim_uA is 0 the limit should not > > - * be changed but the detection should just be enabled/disabled as > > - * is requested. > > + * caused by an unrecoverable error but HW does not perform automatic shut > > + * down. > > + * REGULATOR_SEVERITY_WARN should indicate situation where hardware is still > > This is obviously making things worse - it's creating inconsistent > indentation within the list. Sorry, I will try to fix it in the right way。 Thanks, Yanteng
