Fix doc build warning as:
linux-next/Documentation/driver-api/regulator:166: ./include/linux/regulator/driver.h:96: WARNING: Unexpected indentation.
linux-next/Documentation/driver-api/regulator:166: ./include/linux/regulator/driver.h:98: WARNING: Block quote ends without a blank line; unexpected unindent.
Signed-off-by: Yanteng Si <siyanteng@xxxxxxxxxxx>
---
include/linux/regulator/driver.h | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index 66219b174a8a..f777e259facd 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -92,13 +92,12 @@ enum regulator_detection_severity {
* levels of severity.
* REGULATOR_SEVERITY_PROT should automatically shut down the regulator(s).
* REGULATOR_SEVERITY_ERR should indicate that over-current situation is
- * caused by an unrecoverable error but HW does not perform
- * automatic shut down.
- * REGULATOR_SEVERITY_WARN should indicate situation where hardware is
- * still believed to not be damaged but that a board sepcific
- * recovery action is needed. If lim_uA is 0 the limit should not
- * be changed but the detection should just be enabled/disabled as
- * is requested.
+ * caused by an unrecoverable error but HW does not perform automatic shut
+ * down.
+ * REGULATOR_SEVERITY_WARN should indicate situation where hardware is still
+ * believed to not be damaged but that a board sepcific recovery action is needed.
+ * If lim_uA is 0 the limit should not be changed but the detection should
+ * just be enabled/disabled as is requested.
* @set_over_voltage_protection: Support enabling of and setting limits for over
* voltage situation detection. Detection can be configured for same
* severities as over current protection. Units of uV.
--
2.27.0
