On 1/29/2013 1:05 PM, Katepallewar, Mrugesh wrote: > On Mon, Jan 28, 2013 at 21:32:13, Nori, Sekhar wrote: >> Hi Mrugesh, >> >> On 1/28/2013 1:17 PM, Mrugesh Katepallewar wrote: >>> Add RTC DT entries in da850 dts file. >>> >>> Signed-off-by: Mrugesh Katepallewar <mrugesh.mk@xxxxxx> >>> --- >>> Applies on top of v3.8-rc4 of linus tree. >>> >>> This patch is depending on >>> "ARM: davinci: da850: add interrupt-parent property in soc node" >>> https://patchwork.kernel.org/patch/2044101/ >> >>> Tested on da850-evm device. >>> >>> Test Procedure: >>> date 2013.01.28-10:00:00 (usage: date[YYYY.]MM.DD-hh:mm[:ss]) hwclock >>> -w reset board and check system time. >> >> Queuing this for v3.9. The testing information above is useful and should be part of the changelog. I moved it there while committing. >> >> It will be nice to check the alarm functionality as well. Can you check that and let me know that works as well? > > I tried to test RTC alarm using "rtcwake" command, however it is not working and returning following error > "rtcwake: /dev/rtc0 not enabled for wakeup events" > This is coming because we have not registered RTC device as a wakeup source yet. rtcwake is too much to use if the purpose is just to test the alarm functionality. > For checking RTC alarm interrupt, I developed one simple program which opens RTC device, set alarm and exits. > Then by entering "cat /proc/interrupts" checked RTC interrupt count. No need of writing your own. Simply use the one in Documentation/rtc.txt > Using above test it confirms that RTC alarm functionality is working fine. Okay. Thanks for confirming. Regards, Sekhar -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
