Add device tree based initialization support for TI's tps6507x regulators. Add device tree binding document for TI's tps6507x using datasheet: http://www.ti.com/lit/ds/symlink/tps65070.pdf Signed-off-by: Vishwanathrao Badarkhe, Manish <manishv.b@xxxxxx> --- Documentation/devicetree/bindings/mfd/tps6507x.txt | 91 +++++++++++++++++++ drivers/regulator/tps6507x-regulator.c | 92 ++++++++++++++++++++ 2 files changed, 183 insertions(+), 0 deletions(-) create mode 100755 Documentation/devicetree/bindings/mfd/tps6507x.txt diff --git a/Documentation/devicetree/bindings/mfd/tps6507x.txt b/Documentation/devicetree/bindings/mfd/tps6507x.txt new file mode 100755 index 0000000..8fffa3c --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/tps6507x.txt @@ -0,0 +1,91 @@ +TPS6507x Power Management Integrated Circuit + +Required properties: +- compatible: "ti,tps6507x" +- reg: I2C slave address +- regulators: This is the list of child nodes that specify the regulator + initialization data for defined regulators. Not all regulators for the + given device need to be present. The definition for each of these nodes + is defined using the standard binding for regulators found at + Documentation/devicetree/bindings/regulator/regulator.txt. + The regulator is matched with the regulator-compatible. + + The valid regulator-compatible values are: + tps6507x: vdcdc1, vdcdc2, vdcdc3, vldo1, vldo2 +- xxx-supply: Input voltage supply regulator. + These entries are required if regulators are enabled for a device. + Missing of these properties can cause the regulator registration + fails. + If some of input supply is powered through battery or always-on + supply then also it is require to have these parameters with proper + node handle of always on power supply. + tps6507x: + vindcdc1_2-supply: VDCDC1 and VDCDC2 input. + vindcdc3-supply : VDCDC3 input. + vldo1_2-supply : VLDO1 and VLDO2 input. + +Regulator Optional properties: +- defdcdc_default: It's property of DCDC2 and DCDC3 regulators. + 0: If defdcdc pin of DCDC2/DCDC3 is pulled to GND. + 1: If defdcdc pin of DCDC2/DCDC3 is driven HIGH. + If this property is not defined, it defaults to 0 (not enabled). + +Example: + + pmu: tps6507x@48 { + compatible = "ti,tps6507x"; + reg = <0x48>; + + vindcdc1_2-supply = <&vbat>; + vindcdc3-supply = <...>; + vinldo1_2-supply = <...>; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + vdcdc1_reg: regulator@0 { + regulator-compatible = "VDCDC1"; + reg = <0>; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3450000>; + regulator-always-on; + regulator-boot-on; + }; + vdcdc2_reg: regulator@1 { + regulator-compatible = "VDCDC2"; + reg = <1>; + regulator-min-microvolt = <1710000>; + regulator-max-microvolt = <3450000>; + regulator-always-on; + regulator-boot-on; + defdcdc_default = <1>; + }; + vdcdc3_reg: regulator@2 { + regulator-compatible = "VDCDC3"; + reg = <2>; + regulator-min-microvolt = <950000> + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + defdcdc_default = <1>; + }; + ldo1_reg: regulator@3 { + regulator-compatible = "LDO1"; + reg = <3>; + regulator-min-microvolt = <1710000>; + regulator-max-microvolt = <1890000>; + regulator-always-on; + regulator-boot-on; + }; + ldo2_reg: regulator@4 { + regulator-compatible = "LDO2"; + reg = <4>; + regulator-min-microvolt = <1140000>; + regulator-max-microvolt = <1320000>; + regulator-always-on; + regulator-boot-on; + }; + }; + + }; diff --git a/drivers/regulator/tps6507x-regulator.c b/drivers/regulator/tps6507x-regulator.c index 0233cfb..afdeb65 100644 --- a/drivers/regulator/tps6507x-regulator.c +++ b/drivers/regulator/tps6507x-regulator.c @@ -23,8 +23,10 @@ #include <linux/regulator/driver.h> #include <linux/regulator/machine.h> #include <linux/regulator/tps6507x.h> +#include <linux/of.h> #include <linux/slab.h> #include <linux/mfd/tps6507x.h> +#include <linux/regulator/of_regulator.h> /* DCDC's */ #define TPS6507X_DCDC_1 0 @@ -356,6 +358,80 @@ static struct regulator_ops tps6507x_pmic_ops = { .list_voltage = regulator_list_voltage_table, }; +#ifdef CONFIG_OF +static struct of_regulator_match tps6507x_matches[] = { + { .name = "VDCDC1"}, + { .name = "VDCDC2"}, + { .name = "VDCDC3"}, + { .name = "LDO1"}, + { .name = "LDO2"}, +}; + +static struct tps6507x_board *tps6507x_parse_dt_reg_data( + struct platform_device *pdev, + struct of_regulator_match **tps6507x_reg_matches) +{ + struct tps6507x_board *tps_board; + struct device_node *np = pdev->dev.parent->of_node; + struct device_node *regulators; + struct of_regulator_match *matches; + static struct regulator_init_data *reg_data; + int idx = 0, count, ret; + + tps_board = devm_kzalloc(&pdev->dev, sizeof(*tps_board), + GFP_KERNEL); + if (!tps_board) { + dev_err(&pdev->dev, "Failure to alloc pdata for regulators.\n"); + return NULL; + } + + regulators = of_find_node_by_name(np, "regulators"); + if (!regulators) { + dev_err(&pdev->dev, "regulator node not found\n"); + return NULL; + } + + count = ARRAY_SIZE(tps6507x_matches); + matches = tps6507x_matches; + + ret = of_regulator_match(pdev->dev.parent, regulators, matches, count); + if (ret < 0) { + dev_err(&pdev->dev, "Error parsing regulator init data: %d\n", + ret); + return NULL; + } + + *tps6507x_reg_matches = matches; + + reg_data = devm_kzalloc(&pdev->dev, (sizeof(struct regulator_init_data) + * TPS6507X_NUM_REGULATOR), GFP_KERNEL); + if (!reg_data) { + dev_err(&pdev->dev, "Failure to alloc init data for regulators.\n"); + return NULL; + } + + tps_board->tps6507x_pmic_init_data = reg_data; + + for (idx = 0; idx < count; idx++) { + if (!matches[idx].init_data || !matches[idx].of_node) + continue; + + memcpy(®_data[idx], matches[idx].init_data, + sizeof(struct regulator_init_data)); + + } + + return tps_board; +} +#else +static inline struct tps6507x_board *tps6507x_parse_dt_reg_data( + struct platform_device *pdev, + struct of_regulator_match **tps6507x_reg_matches) +{ + *tps6507x_reg_matches = NULL; + return NULL; +} +#endif static int tps6507x_pmic_probe(struct platform_device *pdev) { struct tps6507x_dev *tps6507x_dev = dev_get_drvdata(pdev->dev.parent); @@ -365,8 +441,10 @@ static int tps6507x_pmic_probe(struct platform_device *pdev) struct regulator_dev *rdev; struct tps6507x_pmic *tps; struct tps6507x_board *tps_board; + struct of_regulator_match *tps6507x_reg_matches = NULL; int i; int error; + unsigned int prop; /** * tps_board points to pmic related constants @@ -374,6 +452,9 @@ static int tps6507x_pmic_probe(struct platform_device *pdev) */ tps_board = dev_get_platdata(tps6507x_dev->dev); + if (!tps_board && tps6507x_dev->dev->of_node) + tps_board = tps6507x_parse_dt_reg_data(pdev, + &tps6507x_reg_matches); if (!tps_board) return -EINVAL; @@ -415,6 +496,17 @@ static int tps6507x_pmic_probe(struct platform_device *pdev) config.init_data = init_data; config.driver_data = tps; + if (tps6507x_reg_matches) { + error = of_property_read_u32( + tps6507x_reg_matches[i].of_node, + "ti,defdcdc_default", &prop); + + if (!error) + tps->info[i]->defdcdc_default = prop; + + config.of_node = tps6507x_reg_matches[i].of_node; + } + rdev = regulator_register(&tps->desc[i], &config); if (IS_ERR(rdev)) { dev_err(tps6507x_dev->dev, -- 1.7.4.1 -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
