This patch series enables device tree support for I2C0 and for regulator via tps6507x mfd device on da850-evm. Applies on top of v3.8-rc4 of linus tree. Tested on da850-evm device. Test procedure followed as below: Once device boots up, issue command as: $for reg in /sys/class/regulator/*; do echo $reg `cat $reg/name` `cat $reg/state` `cat $reg/microvolts`; done This command will print all available regulators with its name, status (enabled/disabled) and voltages(in microvolts) like as below: /sys/class/regulator/regulator.1 VDCDC1_3.3V enabled 3300000 /sys/class/regulator/regulator.2 VDCDC2_3.3V enabled 3300000 /sys/class/regulator/regulator.3 VDCDC3_1.2V enabled 1200000 /sys/class/regulator/regulator.4 LDO1_1.8V enabled 1800000 /sys/class/regulator/regulator.5 LDO2_1.2V enabled 1200000 Vishwanathrao Badarkhe, Manish (6): ARM: davinci: da850: add OF_DEV_AUXDATA entry for I2C0 ARM: davinci: da850: add DT node for I2C0 davinci: mfd: tps6507x: add device-tree support. davinci: regulator: tps6507x: add device tree support. ARM: regulator: add tps6507x device tree data ARM: davinci: da850: add tps6507x regulator DT data Documentation/devicetree/bindings/mfd/tps6507x.txt | 91 +++++++++++++++++++ arch/arm/boot/dts/da850-evm.dts | 79 +++++++++++++++++ arch/arm/boot/dts/da850.dtsi | 10 ++ arch/arm/boot/dts/tps6507x.dtsi | 47 ++++++++++ arch/arm/mach-davinci/da8xx-dt.c | 8 ++- drivers/mfd/tps6507x.c | 9 ++ drivers/regulator/tps6507x-regulator.c | 92 ++++++++++++++++++++ 7 files changed, 335 insertions(+), 1 deletions(-) create mode 100755 Documentation/devicetree/bindings/mfd/tps6507x.txt create mode 100644 arch/arm/boot/dts/tps6507x.dtsi -- 1.7.4.1 -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html