Re: [PATCH 4/4] usb: phy: omap-usb2: enable 960Mhz clock for omap5

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Wed, Sep 26, 2012 at 11:57 PM, Felipe Balbi <balbi@xxxxxx> wrote:
> Hi,
>
> On Wed, Sep 26, 2012 at 11:10:48AM +0530, ABRAHAM, KISHON VIJAY wrote:
>> Hi,
>>
>> On Wed, Sep 19, 2012 at 5:26 PM, Felipe Balbi <balbi@xxxxxx> wrote:
>> > On Wed, Sep 19, 2012 at 05:00:29PM +0530, Kishon Vijay Abraham I wrote:
>> >> "usb_otg_ss_refclk960m" is needed by usb2 phy present in omap5. For
>> >> omap4, the clk_get of this clock will fail since it does not have this
>> >> clock.
>> >>
>> >> Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
>> >> ---
>> >>  Documentation/devicetree/bindings/usb/usb-phy.txt |    3 +++
>> >>  drivers/usb/phy/omap-usb2.c                       |   28 ++++++++++++++++++++-
>> >>  2 files changed, 30 insertions(+), 1 deletion(-)
>> >>
>> >> diff --git a/Documentation/devicetree/bindings/usb/usb-phy.txt b/Documentation/devicetree/bindings/usb/usb-phy.txt
>> >> index 7c5fd89..d5626de 100644
>> >> --- a/Documentation/devicetree/bindings/usb/usb-phy.txt
>> >> +++ b/Documentation/devicetree/bindings/usb/usb-phy.txt
>> >> @@ -24,6 +24,9 @@ Required properties:
>> >>  add the address of control module phy power register until a driver for
>> >>  control module is added
>> >>
>> >> +Optional properties:
>> >> + - has960mhzclk: should be added if the phy needs 960mhz clock
>> >> +
>> >>  This is usually a subnode of ocp2scp to which it is connected.
>> >>
>> >>  usb3phy@4a084400 {
>> >> diff --git a/drivers/usb/phy/omap-usb2.c b/drivers/usb/phy/omap-usb2.c
>> >> index d36c282..d6612ba 100644
>> >> --- a/drivers/usb/phy/omap-usb2.c
>> >> +++ b/drivers/usb/phy/omap-usb2.c
>> >> @@ -146,6 +146,7 @@ static int __devinit omap_usb2_probe(struct platform_device *pdev)
>> >>       struct omap_usb                 *phy;
>> >>       struct usb_otg                  *otg;
>> >>       struct resource                 *res;
>> >> +     struct device_node              *np = pdev->dev.of_node;
>> >>
>> >>       phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
>> >>       if (!phy) {
>> >> @@ -190,6 +191,15 @@ static int __devinit omap_usb2_probe(struct platform_device *pdev)
>> >>       }
>> >>       clk_prepare(phy->wkupclk);
>> >>
>> >> +     if (of_property_read_bool(np, "has960mhzclk")) {
>> >> +             phy->optclk = devm_clk_get(phy->dev, "usb_otg_ss_refclk960m");
>> >> +             if (IS_ERR(phy->optclk)) {
>> >> +                     dev_err(&pdev->dev, "unable to get refclk960m\n");
>> >> +                     return PTR_ERR(phy->optclk);
>> >> +             }
>> >> +             clk_prepare(phy->optclk);
>> >> +     }
>> >
>> > instead, can't you just always try to get the clock but ignore the error
>> > if it fails ?
>>
>> This clock is needed for usb2 to work in dwc3 (omap5). So we have to
>> report the error in case we dont get the clock no?
>
> sure, but you don't need to bail out. Print a warning message such as:
>
> dev_dbg(&pdev->dev, "couldn't get refclk960m, trying without\n");

but then we'll get this debug message for omap4 which actually doesn't
need 960m clk.

Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux