Added a driver for usb3 phy that handles the interaction between usb phy device and dwc3 controller. Currently writing to control module register is taken care in this driver which will be removed once the control module driver is in place. Also included the patch from Moiz to fix gadget pullup in SS mode. This patch series has been lying in my local tree for some time and it's been tested in my tree. git://gitorious.org/linux-usb/linux-usb.git dwc3 This patch series was rebased on git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git xceiv However the dependent modules are not yet upstreamed and hence only compile tested in this tree Kishon Vijay Abraham I (3): usb: phy: add a new driver for usb3 phy usb: phy: omap-usb3: Decrease the number of transitions to recovery usb: phy: omap-usb2: enable 960Mhz clock for omap5 Moiz Sonasath (1): usb: dwc3: Fix gadget pullup in SS mode Documentation/devicetree/bindings/usb/usb-phy.txt | 21 ++ drivers/usb/dwc3/gadget.c | 21 +- drivers/usb/phy/Kconfig | 9 + drivers/usb/phy/Makefile | 1 + drivers/usb/phy/omap-usb2.c | 28 +- drivers/usb/phy/omap-usb3.c | 416 +++++++++++++++++++++ include/linux/usb/omap_usb.h | 73 ++++ include/linux/usb/phy.h | 10 +- 8 files changed, 571 insertions(+), 8 deletions(-) create mode 100644 drivers/usb/phy/omap-usb3.c -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
