Re: [PATCH v2 0/2] I2C: SIS964: Bus driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Amaury,

On Fri,  3 Aug 2012 17:35:43 +0200, Amaury Decrême wrote:
> This series of patches are a I2C bus driver for the SIS964.
> 
> 
> The SIS964 is nearly the same as SIS630 for the SMBUS :
> 	- Most of the SMBus registers (Status, Enable, Control,
> 	  Host Control, etc.) are at the same adresses + 0x60
> 	- The register count is 21 instead of 20
> 
> The SIS964 name is ambiguous as this chip isn't part of the SIS96X
> family and behaves differently.
> 
> The datasheets have been used to develop the driver based on the
> exsiting driver for I2C SIS630 . 

What is the rationale for not adding support for the new chip to
i2c-sis630 then? That would probably be a lot easier to review.

> Content of the patches:
> 	- 1/2 The driver itself
> 	- 2/2 Documentation, Kconfig, Makefile, Maintainers

This split makes little sense. Integration should come with the driver,
otherwise even build-testing is impossible.


-- 
Jean Delvare
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux