If the system has Intel IAA, and if sysctl vm.compress-batching is set to
"1", zswap_store() will call crypto_acomp_batch_compress() to compress up
to SWAP_CRYPTO_BATCH_SIZE (i.e. 8) pages in large folios in parallel using
the multiple compress engines available in IAA hardware.
On platforms with multiple IAA devices per socket, compress jobs from all
cores in a socket will be distributed among all IAA devices on the socket
by the iaa_crypto driver.
With deflate-iaa configured as the zswap compressor, and
sysctl vm.compress-batching is enabled, the first time zswap_store() has to
swapout a large folio on any given cpu, it will allocate the
pool->acomp_batch_ctx resources on that cpu, and set pool->can_batch_comp
to BATCH_COMP_ENABLED. It will then proceed to call the main
__zswap_store_batch_core() compress batching function. Subsequent calls to
zswap_store() on the same cpu will go ahead and use the acomp_batch_ctx by
checking the pool->can_batch_comp status.
Hence, we allocate the per-cpu pool->acomp_batch_ctx resources only on an
as-needed basis, to reduce memory footprint cost. The cost is not incurred
on cores that never get to swapout a large folio.
This patch introduces the main __zswap_store_batch_core() function for
compress batching. This interface represents the extensible compress
batching architecture that can potentially be called with a batch of
any-order folios from shrink_folio_list(). In other words, although
zswap_store() calls __zswap_store_batch_core() with exactly one large folio
in this patch, we can reuse this interface to reclaim a batch of folios, to
significantly improve the reclaim path efficiency due to IAA's parallel
compression capability.
The newly added functions that implement batched stores follow the
general structure of zswap_store() of a large folio. Some amount of
restructuring and optimization is done to minimize failure points
for a batch, fail early and maximize the zswap store pipeline occupancy
with SWAP_CRYPTO_BATCH_SIZE pages, potentially from multiple
folios. This is intended to maximize reclaim throughput with the IAA
hardware parallel compressions.
Signed-off-by: Kanchana P Sridhar <kanchana.p.sridhar@xxxxxxxxx>
---
include/linux/zswap.h | 84 ++++++
mm/zswap.c | 625 ++++++++++++++++++++++++++++++++++++++++++
2 files changed, 709 insertions(+)
diff --git a/include/linux/zswap.h b/include/linux/zswap.h
index 9ad27ab3d222..6d3ef4780c69 100644
--- a/include/linux/zswap.h
+++ b/include/linux/zswap.h
@@ -31,6 +31,88 @@ struct zswap_lruvec_state {
atomic_long_t nr_disk_swapins;
};
+/*
+ * struct zswap_store_sub_batch_page:
+ *
+ * This represents one "zswap batching element", namely, the
+ * attributes associated with a page in a large folio that will
+ * be compressed and stored in zswap. The term "batch" is reserved
+ * for a conceptual "batch" of folios that can be sent to
+ * zswap_store() by reclaim. The term "sub-batch" is used to describe
+ * a collection of "zswap batching elements", i.e., an array of
+ * "struct zswap_store_sub_batch_page *".
+ *
+ * The zswap compress sub-batch size is specified by
+ * SWAP_CRYPTO_BATCH_SIZE, currently set as 8UL if the
+ * platform has Intel IAA. This means zswap can store a large folio
+ * by creating sub-batches of up to 8 pages and compressing this
+ * batch using IAA to parallelize the 8 compress jobs in hardware.
+ * For e.g., a 64KB folio can be compressed as 2 sub-batches of
+ * 8 pages each. This can significantly improve the zswap_store()
+ * performance for large folios.
+ *
+ * Although the page itself is represented directly, the structure
+ * adds a "u8 batch_idx" to represent an index for the folio in a
+ * conceptual "batch of folios" that can be passed to zswap_store().
+ * Conceptually, this allows for up to 256 folios that can be passed
+ * to zswap_store(). If this conceptual number of folios sent to
+ * zswap_store() exceeds 256, the "batch_idx" needs to become u16.
+ */
+struct zswap_store_sub_batch_page {
+ u8 batch_idx;
+ swp_entry_t swpentry;
+ struct obj_cgroup *objcg;
+ struct zswap_entry *entry;
+ int error; /* folio error status. */
+};
+
+/*
+ * struct zswap_store_pipeline_state:
+ *
+ * This stores state during IAA compress batching of (conceptually, a batch of)
+ * folios. The term pipelining in this context, refers to breaking down
+ * the batch of folios being reclaimed into sub-batches of
+ * SWAP_CRYPTO_BATCH_SIZE pages, batch compressing and storing the
+ * sub-batch. This concept could be further evolved to use overlap of CPU
+ * computes with IAA computes. For instance, we could stage the post-compress
+ * computes for sub-batch "N-1" to happen in parallel with IAA batch
+ * compression of sub-batch "N".
+ *
+ * We begin by developing the concept of compress batching. Pipelining with
+ * overlap can be future work.
+ *
+ * @errors: The errors status for the batch of reclaim folios passed in from
+ * a higher mm layer such as swap_writepage().
+ * @pool: A valid zswap_pool.
+ * @acomp_ctx: The per-cpu pointer to the crypto_acomp_ctx for the @pool.
+ * @sub_batch: This is an array that represents the sub-batch of up to
+ * SWAP_CRYPTO_BATCH_SIZE pages that are being stored
+ * in zswap.
+ * @comp_dsts: The destination buffers for crypto_acomp_compress() for each
+ * page being compressed.
+ * @comp_dlens: The destination buffers' lengths from crypto_acomp_compress()
+ * obtained after crypto_acomp_poll() returns completion status,
+ * for each page being compressed.
+ * @comp_errors: Compression errors for each page being compressed.
+ * @nr_comp_pages: Total number of pages in @sub_batch.
+ *
+ * Note:
+ * The max sub-batch size is SWAP_CRYPTO_BATCH_SIZE, currently 8UL.
+ * Hence, if SWAP_CRYPTO_BATCH_SIZE exceeds 256, some of the
+ * u8 members (except @comp_dsts) need to become u16.
+ */
+struct zswap_store_pipeline_state {
+ int *errors;
+ struct zswap_pool *pool;
+ struct crypto_acomp_ctx *acomp_ctx;
+ struct zswap_store_sub_batch_page *sub_batch;
+ struct page **comp_pages;
+ u8 **comp_dsts;
+ unsigned int *comp_dlens;
+ int *comp_errors;
+ u8 nr_comp_pages;
+};
+
unsigned long zswap_total_pages(void);
bool zswap_store(struct folio *folio);
bool zswap_load(struct folio *folio);
@@ -45,6 +127,8 @@ bool zswap_never_enabled(void);
#else
struct zswap_lruvec_state {};
+struct zswap_store_sub_batch_page {};
+struct zswap_store_pipeline_state {};
static inline bool zswap_store(struct folio *folio)
{
diff --git a/mm/zswap.c b/mm/zswap.c
index 2af736e38213..538aac3fb552 100644
--- a/mm/zswap.c
+++ b/mm/zswap.c
@@ -255,6 +255,12 @@ static int zswap_create_acomp_ctx(unsigned int cpu,
char *tfm_name,
unsigned int nr_reqs);
+static bool __zswap_store_batch_core(
+ int node_id,
+ struct folio **folios,
+ int *errors,
+ unsigned int nr_folios);
+
/*********************************
* pool functions
**********************************/
@@ -1626,6 +1632,12 @@ static ssize_t zswap_store_page(struct page *page,
return -EINVAL;
}
+/*
+ * Modified to use the IAA compress batching framework implemented in
+ * __zswap_store_batch_core() if sysctl vm.compress-batching is 1.
+ * The batching code is intended to significantly improve folio store
+ * performance over the sequential code.
+ */
bool zswap_store(struct folio *folio)
{
long nr_pages = folio_nr_pages(folio);
@@ -1638,6 +1650,38 @@ bool zswap_store(struct folio *folio)
bool ret = false;
long index;
+ /*
+ * Improve large folio zswap_store() latency with IAA compress batching,
+ * if this is enabled by setting sysctl vm.compress-batching to "1".
+ * If enabled, the large folio's pages are compressed in parallel in
+ * batches of SWAP_CRYPTO_BATCH_SIZE pages. If disabled, every page in
+ * the large folio is compressed sequentially.
+ */
+ if (folio_test_large(folio) && READ_ONCE(compress_batching)) {
+ pool = zswap_pool_current_get();
+ if (!pool) {
+ pr_err("Cannot setup acomp_batch_ctx for compress batching: no current pool found\n");
+ goto sequential_store;
+ }
+
+ if (zswap_pool_can_batch(pool)) {
+ int error = -1;
+ bool store_batch = __zswap_store_batch_core(
+ folio_nid(folio),
+ &folio, &error, 1);
+
+ if (store_batch) {
+ zswap_pool_put(pool);
+ if (!error)
+ ret = true;
+ return ret;
+ }
+ }
+ zswap_pool_put(pool);
+ }
+
+sequential_store:
+
VM_WARN_ON_ONCE(!folio_test_locked(folio));
VM_WARN_ON_ONCE(!folio_test_swapcache(folio));
@@ -1724,6 +1768,587 @@ bool zswap_store(struct folio *folio)
return ret;
}
+/*
+ * Note: If SWAP_CRYPTO_BATCH_SIZE exceeds 256, change the
+ * u8 stack variables in the next several functions, to u16.
+ */
+
+/*
+ * Propagate the "sbp" error condition to other batch elements belonging to
+ * the same folio as "sbp".
+ */
+static __always_inline void zswap_store_propagate_errors(
+ struct zswap_store_pipeline_state *zst,
+ u8 error_batch_idx)
+{
+ u8 i;
+
+ if (zst->errors[error_batch_idx])
+ return;
+
+ for (i = 0; i < zst->nr_comp_pages; ++i) {
+ struct zswap_store_sub_batch_page *sbp = &zst->sub_batch[i];
+
+ if (sbp->batch_idx == error_batch_idx) {
+ if (!sbp->error) {
+ if (sbp->entry) {
+ if (!IS_ERR_VALUE(sbp->entry->handle))
+ zpool_free(zst->pool->zpool, sbp->entry->handle);
+
+ zswap_entry_cache_free(sbp->entry);
+ sbp->entry = NULL;
+ }
+ sbp->error = -EINVAL;
+ }
+ }
+ }
+
+ /*
+ * Set zswap status for the folio to "error"
+ * for use in swap_writepage.
+ */
+ zst->errors[error_batch_idx] = -EINVAL;
+}
+
+static __always_inline void zswap_process_comp_errors(
+ struct zswap_store_pipeline_state *zst)
+{
+ u8 i;
+
+ for (i = 0; i < zst->nr_comp_pages; ++i) {
+ struct zswap_store_sub_batch_page *sbp = &zst->sub_batch[i];
+
+ if (zst->comp_errors[i]) {
+ if (zst->comp_errors[i] == -ENOSPC)
+ zswap_reject_compress_poor++;
+ else
+ zswap_reject_compress_fail++;
+
+ if (!sbp->error)
+ zswap_store_propagate_errors(zst,
+ sbp->batch_idx);
+ }
+ }
+}
+
+static void zswap_compress_batch(struct zswap_store_pipeline_state *zst)
+{
+ /*
+ * Compress up to SWAP_CRYPTO_BATCH_SIZE pages.
+ * It is important to note that the zswap pool's per-cpu "acomp_batch_ctx"
+ * resources are allocated only if the crypto_acomp has registered both,
+ * crypto_acomp_batch_compress() and crypto_acomp_batch_decompress() API.
+ * The iaa_crypto driver registers implementations for both these API.
+ * Hence, if IAA is the zswap compressor and sysctl vm.compress-batching
+ * is set to "1", the call to crypto_acomp_batch_compress() will
+ * compresses the pages in parallel, leading to significant performance
+ * improvements as compared to software compressors.
+ */
+ crypto_acomp_batch_compress(
+ zst->acomp_ctx->reqs,
+ &zst->acomp_ctx->wait,
+ zst->comp_pages,
+ zst->comp_dsts,
+ zst->comp_dlens,
+ zst->comp_errors,
+ zst->nr_comp_pages);
+
+ /*
+ * Scan the sub-batch for any compression errors,
+ * and invalidate pages with errors, along with other
+ * pages belonging to the same folio as the error pages.
+ */
+ zswap_process_comp_errors(zst);
+}
+
+static void zswap_zpool_store_sub_batch(
+ struct zswap_store_pipeline_state *zst)
+{
+ u8 i;
+
+ for (i = 0; i < zst->nr_comp_pages; ++i) {
+ struct zswap_store_sub_batch_page *sbp = &zst->sub_batch[i];
+ struct zpool *zpool;
+ unsigned long handle;
+ char *buf;
+ gfp_t gfp;
+ int err;
+
+ /* Skip pages that had compress errors. */
+ if (sbp->error)
+ continue;
+
+ zpool = zst->pool->zpool;
+ gfp = __GFP_NORETRY | __GFP_NOWARN | __GFP_KSWAPD_RECLAIM;
+ if (zpool_malloc_support_movable(zpool))
+ gfp |= __GFP_HIGHMEM | __GFP_MOVABLE;
+ err = zpool_malloc(zpool, zst->comp_dlens[i], gfp, &handle);
+
+ if (err) {
+ if (err == -ENOSPC)
+ zswap_reject_compress_poor++;
+ else
+ zswap_reject_alloc_fail++;
+
+ /*
+ * An error should be propagated to other pages of the
+ * same folio in the sub-batch, and zpool resources for
+ * those pages (in sub-batch order prior to this zpool
+ * error) should be de-allocated.
+ */
+ zswap_store_propagate_errors(zst, sbp->batch_idx);
+ continue;
+ }
+
+ buf = zpool_map_handle(zpool, handle, ZPOOL_MM_WO);
+ memcpy(buf, zst->comp_dsts[i], zst->comp_dlens[i]);
+ zpool_unmap_handle(zpool, handle);
+
+ sbp->entry->handle = handle;
+ sbp->entry->length = zst->comp_dlens[i];
+ }
+}
+
+/*
+ * Returns true if the entry was successfully
+ * stored in the xarray, and false otherwise.
+ */
+static bool zswap_store_entry(swp_entry_t page_swpentry,
+ struct zswap_entry *entry)
+{
+ struct zswap_entry *old = xa_store(swap_zswap_tree(page_swpentry),
+ swp_offset(page_swpentry),
+ entry, GFP_KERNEL);
+ if (xa_is_err(old)) {
+ int err = xa_err(old);
+
+ WARN_ONCE(err != -ENOMEM, "unexpected xarray error: %d\n", err);
+ zswap_reject_alloc_fail++;
+ return false;
+ }
+
+ /*
+ * We may have had an existing entry that became stale when
+ * the folio was redirtied and now the new version is being
+ * swapped out. Get rid of the old.
+ */
+ if (old)
+ zswap_entry_free(old);
+
+ return true;
+}
+
+static void zswap_batch_compress_post_proc(
+ struct zswap_store_pipeline_state *zst)
+{
+ int nr_objcg_pages = 0, nr_pages = 0;
+ struct obj_cgroup *objcg = NULL;
+ size_t compressed_bytes = 0;
+ u8 i;
+
+ zswap_zpool_store_sub_batch(zst);
+
+ for (i = 0; i < zst->nr_comp_pages; ++i) {
+ struct zswap_store_sub_batch_page *sbp = &zst->sub_batch[i];
+
+ if (sbp->error)
+ continue;
+
+ if (!zswap_store_entry(sbp->swpentry, sbp->entry)) {
+ zswap_store_propagate_errors(zst, sbp->batch_idx);
+ continue;
+ }
+
+ /*
+ * The entry is successfully compressed and stored in the tree,
+ * there is no further possibility of failure. Grab refs to the
+ * pool and objcg. These refs will be dropped by
+ * zswap_entry_free() when the entry is removed from the tree.
+ */
+ zswap_pool_get(zst->pool);
+ if (sbp->objcg)
+ obj_cgroup_get(sbp->objcg);
+
+ /*
+ * We finish initializing the entry while it's already in xarray.
+ * This is safe because:
+ *
+ * 1. Concurrent stores and invalidations are excluded by folio
+ * lock.
+ *
+ * 2. Writeback is excluded by the entry not being on the LRU yet.
+ * The publishing order matters to prevent writeback from seeing
+ * an incoherent entry.
+ */
+ sbp->entry->pool = zst->pool;
+ sbp->entry->swpentry = sbp->swpentry;
+ sbp->entry->objcg = sbp->objcg;
+ sbp->entry->referenced = true;
+ if (sbp->entry->length) {
+ INIT_LIST_HEAD(&sbp->entry->lru);
+ zswap_lru_add(&zswap_list_lru, sbp->entry);
+ }
+
+ if (!objcg && sbp->objcg) {
+ objcg = sbp->objcg;
+ } else if (objcg && sbp->objcg && (objcg != sbp->objcg)) {
+ obj_cgroup_charge_zswap(objcg, compressed_bytes);
+ count_objcg_events(objcg, ZSWPOUT, nr_objcg_pages);
+ compressed_bytes = 0;
+ nr_objcg_pages = 0;
+ objcg = sbp->objcg;
+ }
+
+ if (sbp->objcg) {
+ compressed_bytes += sbp->entry->length;
+ ++nr_objcg_pages;
+ }
+
+ ++nr_pages;
+ } /* for sub-batch pages. */
+
+ if (objcg) {
+ obj_cgroup_charge_zswap(objcg, compressed_bytes);
+ count_objcg_events(objcg, ZSWPOUT, nr_objcg_pages);
+ }
+
+ atomic_long_add(nr_pages, &zswap_stored_pages);
+ count_vm_events(ZSWPOUT, nr_pages);
+}
+
+static void zswap_store_sub_batch(struct zswap_store_pipeline_state *zst)
+{
+ u8 i;
+
+ for (i = 0; i < zst->nr_comp_pages; ++i) {
+ zst->comp_dsts[i] = zst->acomp_ctx->buffers[i];
+ zst->comp_dlens[i] = PAGE_SIZE;
+ } /* for sub-batch pages. */
+
+ /*
+ * Batch compress sub-batch "N". If IAA is the compressor, the
+ * hardware will compress multiple pages in parallel.
+ */
+ zswap_compress_batch(zst);
+
+ zswap_batch_compress_post_proc(zst);
+}
+
+static void zswap_add_folio_pages_to_sb(
+ struct zswap_store_pipeline_state *zst,
+ struct folio* folio,
+ u8 batch_idx,
+ struct obj_cgroup *objcg,
+ struct zswap_entry *entries[],
+ long start_idx,
+ u8 add_nr_pages)
+{
+ long index;
+
+ for (index = start_idx; index < (start_idx + add_nr_pages); ++index) {
+ u8 i = zst->nr_comp_pages;
+ struct zswap_store_sub_batch_page *sbp = &zst->sub_batch[i];
+ struct page *page = folio_page(folio, index);
+ zst->comp_pages[i] = page;
+ sbp->swpentry = page_swap_entry(page);
+ sbp->batch_idx = batch_idx;
+ sbp->objcg = objcg;
+ sbp->entry = entries[index - start_idx];
+ sbp->error = 0;
+ ++zst->nr_comp_pages;
+ }
+}
+
+static __always_inline void zswap_store_reset_sub_batch(
+ struct zswap_store_pipeline_state *zst)
+{
+ zst->nr_comp_pages = 0;
+}
+
+/* Allocate entries for the next sub-batch. */
+static int zswap_alloc_entries(u8 nr_entries,
+ struct zswap_entry *entries[],
+ int node_id)
+{
+ u8 i;
+
+ for (i = 0; i < nr_entries; ++i) {
+ entries[i] = zswap_entry_cache_alloc(GFP_KERNEL, node_id);
+ if (!entries[i]) {
+ u8 j;
+
+ zswap_reject_kmemcache_fail++;
+ for (j = 0; j < i; ++j)
+ zswap_entry_cache_free(entries[j]);
+ return -EINVAL;
+ }
+
+ entries[i]->handle = (unsigned long)ERR_PTR(-EINVAL);
+ }
+
+ return 0;
+}
+
+/*
+ * If the zswap store fails or zswap is disabled, we must invalidate
+ * the possibly stale entries which were previously stored at the
+ * offsets corresponding to each page of the folio. Otherwise,
+ * writeback could overwrite the new data in the swapfile.
+ */
+static void zswap_delete_stored_entries(struct folio *folio)
+{
+ swp_entry_t swp = folio->swap;
+ unsigned type = swp_type(swp);
+ pgoff_t offset = swp_offset(swp);
+ struct zswap_entry *entry;
+ struct xarray *tree;
+ long index;
+
+ for (index = 0; index < folio_nr_pages(folio); ++index) {
+ tree = swap_zswap_tree(swp_entry(type, offset + index));
+ entry = xa_erase(tree, offset + index);
+ if (entry)
+ zswap_entry_free(entry);
+ }
+}
+
+static void zswap_store_process_folio_errors(
+ struct folio **folios,
+ int *errors,
+ unsigned int nr_folios)
+{
+ u8 batch_idx;
+
+ for (batch_idx = 0; batch_idx < nr_folios; ++batch_idx)
+ if (errors[batch_idx])
+ zswap_delete_stored_entries(folios[batch_idx]);
+}
+
+/*
+ * Store a (batch of) any-order large folio(s) in zswap. Each folio will be
+ * broken into sub-batches of SWAP_CRYPTO_BATCH_SIZE pages, the
+ * sub-batch will be compressed by IAA in parallel, and stored in zpool/xarray.
+ *
+ * This the main procedure for batching of folios, and batching within
+ * large folios.
+ *
+ * This procedure should only be called if zswap supports batching of stores.
+ * Otherwise, the sequential implementation for storing folios as in the
+ * current zswap_store() should be used.
+ *
+ * The signature of this procedure is meant to allow the calling function,
+ * (for instance, swap_writepage()) to pass an array @folios
+ * (the "reclaim batch") of @nr_folios folios to be stored in zswap.
+ * All folios in the batch must have the same swap type and folio_nid @node_id
+ * (simplifying assumptions only to manage code complexity).
+ *
+ * @errors and @folios have @nr_folios number of entries, with one-one
+ * correspondence (@errors[i] represents the error status of @folios[i],
+ * for i in @nr_folios).
+ * The calling function (for instance, swap_writepage()) should initialize
+ * @errors[i] to a non-0 value.
+ * If zswap successfully stores @folios[i], it will set @errors[i] to 0.
+ * If there is an error in zswap, it will set @errors[i] to -EINVAL.
+ */
+static bool __zswap_store_batch_core(
+ int node_id,
+ struct folio **folios,
+ int *errors,
+ unsigned int nr_folios)
+{
+ struct zswap_store_sub_batch_page sub_batch[SWAP_CRYPTO_BATCH_SIZE];
+ struct page *comp_pages[SWAP_CRYPTO_BATCH_SIZE];
+ u8 *comp_dsts[SWAP_CRYPTO_BATCH_SIZE] = { NULL };
+ unsigned int comp_dlens[SWAP_CRYPTO_BATCH_SIZE];
+ int comp_errors[SWAP_CRYPTO_BATCH_SIZE];
+ struct crypto_acomp_ctx *acomp_ctx, *acomp_batch_ctx;
+ struct zswap_pool *pool;
+ /*
+ * For now, lets say a max of 256 large folios can be reclaimed
+ * at a time, as a batch. If this exceeds 256, change this to u16.
+ */
+ u8 batch_idx;
+
+ /* Initialize the compress batching pipeline state. */
+ struct zswap_store_pipeline_state zst = {
+ .errors = errors,
+ .pool = NULL,
+ .acomp_ctx = NULL,
+ .sub_batch = sub_batch,
+ .comp_pages = comp_pages,
+ .comp_dsts = comp_dsts,
+ .comp_dlens = comp_dlens,
+ .comp_errors = comp_errors,
+ .nr_comp_pages = 0,
+ };
+
+ pool = zswap_pool_current_get();
+ if (!pool) {
+ if (zswap_check_limits())
+ queue_work(shrink_wq, &zswap_shrink_work);
+ goto check_old;
+ }
+
+ /*
+ * Caller should make sure that __zswap_store_batch_core() is
+ * invoked only if sysctl vm.compress-batching is set to "1".
+ *
+ * Verify if we are still on the same cpu for which batching
+ * resources in acomp_batch_ctx were allocated in zswap_store().
+ * If not, return to zswap_store() for sequential store of the folio.
+ */
+ acomp_ctx = raw_cpu_ptr(pool->acomp_ctx);
+ mutex_lock(&acomp_ctx->mutex);
+
+ acomp_batch_ctx = raw_cpu_ptr(pool->acomp_batch_ctx);
+ if (!acomp_batch_ctx || !acomp_batch_ctx->nr_reqs) {
+ mutex_unlock(&acomp_ctx->mutex);
+ zswap_pool_put(pool);
+ return false;
+ }
+
+ mutex_lock(&acomp_batch_ctx->mutex);
+ mutex_unlock(&acomp_ctx->mutex);
+
+ zst.pool = pool;
+ zst.acomp_ctx = acomp_batch_ctx;
+
+ /*
+ * Iterate over the folios passed in. Construct sub-batches of up to
+ * SWAP_CRYPTO_BATCH_SIZE pages, if necessary, by iterating through
+ * multiple folios from the input "folios". Process each sub-batch
+ * with IAA batch compression. Detect errors from batch compression
+ * and set the impacted folio's error status (this happens in
+ * zswap_store_process_errors()).
+ */
+ for (batch_idx = 0; batch_idx < nr_folios; ++batch_idx) {
+ struct folio *folio = folios[batch_idx];
+ BUG_ON(!folio);
+ long folio_start_idx, nr_pages = folio_nr_pages(folio);
+ struct zswap_entry *entries[SWAP_CRYPTO_BATCH_SIZE];
+ struct obj_cgroup *objcg = NULL;
+ struct mem_cgroup *memcg = NULL;
+
+ VM_WARN_ON_ONCE(!folio_test_locked(folio));
+ VM_WARN_ON_ONCE(!folio_test_swapcache(folio));
+
+ /*
+ * If zswap is disabled, we must invalidate the possibly stale entry
+ * which was previously stored at this offset. Otherwise, writeback
+ * could overwrite the new data in the swapfile.
+ */
+ if (!zswap_enabled)
+ continue;
+
+ /* Check cgroup limits */
+ objcg = get_obj_cgroup_from_folio(folio);
+ if (objcg && !obj_cgroup_may_zswap(objcg)) {
+ memcg = get_mem_cgroup_from_objcg(objcg);
+ if (shrink_memcg(memcg)) {
+ mem_cgroup_put(memcg);
+ goto put_objcg;
+ }
+ mem_cgroup_put(memcg);
+ }
+
+ if (zswap_check_limits())
+ goto put_objcg;
+
+ if (objcg) {
+ memcg = get_mem_cgroup_from_objcg(objcg);
+ if (memcg_list_lru_alloc(memcg, &zswap_list_lru, GFP_KERNEL)) {
+ mem_cgroup_put(memcg);
+ goto put_objcg;
+ }
+ mem_cgroup_put(memcg);
+ }
+
+ /*
+ * By default, set zswap status to "success" for use in
+ * swap_writepage() when this returns. In case of errors,
+ * a negative error number will over-write this when
+ * zswap_store_process_errors() is called.
+ */
+ errors[batch_idx] = 0;
+
+ folio_start_idx = 0;
+
+ while (nr_pages > 0) {
+ u8 add_nr_pages;
+
+ /*
+ * If we have accumulated SWAP_CRYPTO_BATCH_SIZE
+ * pages, process the sub-batch: it could contain pages
+ * from multiple folios.
+ */
+ if (zst.nr_comp_pages == SWAP_CRYPTO_BATCH_SIZE) {
+ zswap_store_sub_batch(&zst);
+ zswap_store_reset_sub_batch(&zst);
+ /*
+ * Stop processing this folio if it had
+ * compress errors.
+ */
+ if (errors[batch_idx])
+ goto put_objcg;
+ }
+
+ add_nr_pages = min3((
+ (long)SWAP_CRYPTO_BATCH_SIZE -
+ (long)zst.nr_comp_pages),
+ nr_pages,
+ (long)SWAP_CRYPTO_BATCH_SIZE);
+
+ /*
+ * Allocate zswap_entries for this sub-batch. If we
+ * get errors while doing so, we can flag an error
+ * for the folio, call the shrinker and move on.
+ */
+ if (zswap_alloc_entries(add_nr_pages,
+ entries, node_id)) {
+ zswap_store_reset_sub_batch(&zst);
+ errors[batch_idx] = -EINVAL;
+ goto put_objcg;
+ }
+
+ zswap_add_folio_pages_to_sb(
+ &zst,
+ folio,
+ batch_idx,
+ objcg,
+ entries,
+ folio_start_idx,
+ add_nr_pages);
+
+ nr_pages -= add_nr_pages;
+ folio_start_idx += add_nr_pages;
+ } /* this folio has pages to be compressed. */
+
+ obj_cgroup_put(objcg);
+ continue;
+
+put_objcg:
+ obj_cgroup_put(objcg);
+ if (zswap_pool_reached_full)
+ queue_work(shrink_wq, &zswap_shrink_work);
+ } /* for batch folios */
+
+ if (!zswap_enabled)
+ goto check_old;
+
+ /*
+ * Process last sub-batch: it could contain pages from
+ * multiple folios.
+ */
+ if (zst.nr_comp_pages)
+ zswap_store_sub_batch(&zst);
+
+ mutex_unlock(&acomp_batch_ctx->mutex);
+ zswap_pool_put(pool);
+check_old:
+ zswap_store_process_folio_errors(folios, errors, nr_folios);
+ return true;
+}
+
bool zswap_load(struct folio *folio)
{
swp_entry_t swp = folio->swap;
--
2.27.0
