> > Add support for Tegra Security Engine which can accelerates various
> > crypto algorithms. The Engine has two separate instances within for
> > AES and HASH algorithms respectively.
> >
> > The driver registers two crypto engines - one for AES and another for
> > HASH algorithms and these operate independently and both uses the
> > host1x bus. Additionally, it provides hardware-assisted key
> > protection for up to 15 symmetric keys which it can use for the cipher
> operations.
> >
> > Signed-off-by: Akhil R <akhilrajeev@xxxxxxxxxx>
> > ---
>
> ...
>
> > +
> > +int tegra_init_hash(struct tegra_se *se) {
> > + struct ahash_engine_alg *alg;
> > + int i, ret;
> > +
> > + se->manifest = tegra_hash_kac_manifest;
> > +
> > + for (i = 0; i < ARRAY_SIZE(tegra_hash_algs); i++) {
> > + tegra_hash_algs[i].se_dev = se;
> > + alg = &tegra_hash_algs[i].alg.ahash;
> > +
> > + ret = crypto_engine_register_ahash(alg);
> > + if (ret) {
> > + dev_err(se->dev, "failed to register %s\n",
> > + alg->base.halg.base.cra_name);
> > + goto sha_err;
> > + }
> > + }
> > +
> > + dev_info(se->dev, "registered HASH algorithms\n");
>
> Drop, not needed. Actually drop simple success messages. Drivers do not spam
> dmesg without need.
>
> ...
>
> > +
> > +int tegra_se_host1x_register(struct tegra_se *se) {
> > + INIT_LIST_HEAD(&se->client.list);
> > + se->client.dev = se->dev;
> > + se->client.ops = &tegra_se_client_ops;
> > + se->client.class = se->hw->host1x_class;
> > + se->client.num_syncpts = 1;
> > +
> > + host1x_client_register(&se->client);
> > +
> > + return 0;
> > +}
> > +
> > +static int tegra_se_clk_init(struct tegra_se *se) {
> > + int i, ret;
> > +
> > + se->clk = devm_clk_get(se->dev, NULL);
> > + if (IS_ERR(se->clk)) {
> > + dev_err(se->dev, "failed to get clock\n");
>
> Why do you print failures multiple times? Once here, second in probe.
>
> return dev_err_probe
>
> > + return PTR_ERR(se->clk);
> > + }
> > +
> > + ret = clk_set_rate(se->clk, ULONG_MAX);
> > + if (ret) {
> > + dev_err(se->dev, "failed to set %d clock rate", i);
>
> Same comments
>
> > + return ret;
> > + }
> > +
> > + ret = clk_prepare_enable(se->clk);
> > + if (ret) {
> > + dev_err(se->dev, "failed to enable clocks\n");
>
> Same comments
>
> > + return ret;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static void tegra_se_clk_deinit(struct tegra_se *se) {
> > + clk_disable_unprepare(se->clk);
>
> Why aren't you using devm_clk_get_enabled? This looks like porting some old,
> out-of-tree vendor crappy driver :(
>
> > +}
> > +
> > +static int tegra_se_probe(struct platform_device *pdev) {
> > + struct device *dev = &pdev->dev;
> > + struct tegra_se *se;
> > + int ret;
> > +
> > + se = devm_kzalloc(dev, sizeof(*se), GFP_KERNEL);
> > + if (!se)
> > + return -ENOMEM;
> > +
> > + se->dev = dev;
> > + se->owner = TEGRA_GPSE_ID;
> > + se->hw = device_get_match_data(&pdev->dev);
> > +
> > + se->base = devm_platform_ioremap_resource(pdev, 0);
> > + if (IS_ERR(se->base))
> > + return PTR_ERR(se->base);
> > +
> > + dma_set_mask_and_coherent(dev, DMA_BIT_MASK(39));
> > + platform_set_drvdata(pdev, se);
> > +
> > + ret = tegra_se_clk_init(se);
> > + if (ret) {
> > + dev_err(dev, "failed to init clocks\n");
>
> Syntax is:
> return dev_err_probe
>
> > + return ret;
> > + }
> > +
> > + if (!tegra_dev_iommu_get_stream_id(dev, &se->stream_id)) {
> > + dev_err(dev, "failed to get IOMMU stream ID\n");
>
> dev_err_probe
>
> > + goto clk_deinit;
> > + }
> > +
> > + se_writel(se, se->stream_id, SE_STREAM_ID);
> > +
> > + se->engine = crypto_engine_alloc_init(dev, 0);
> > + if (!se->engine) {
> > + dev_err(dev, "failed to init crypto engine\n");
>
> Really? Test your code with coccinelle. Drop.
>
> > + ret = -ENOMEM;
> > + goto iommu_free;
> > + }
> > +
> > + ret = crypto_engine_start(se->engine);
> > + if (ret) {
> > + dev_err(dev, "failed to start crypto engine\n");
>
> dev_err_probe
>
> > + goto engine_exit;
> > + }
> > +
> > + ret = tegra_se_host1x_register(se);
> > + if (ret) {
> > + dev_err(dev, "failed to init host1x params\n");
>
> dev_err_probe
>
> > + goto engine_stop;
> > + }
> > +
> > + return 0;
> > +
> > +engine_stop:
> > + crypto_engine_stop(se->engine);
> > +engine_exit:
> > + crypto_engine_exit(se->engine);
> > +iommu_free:
> > + iommu_fwspec_free(se->dev);
> > +clk_deinit:
> > + tegra_se_clk_deinit(se);
> > +
> > + return ret;
> > +}
> > +
> > +static int tegra_se_remove(struct platform_device *pdev) {
> > + struct tegra_se *se = platform_get_drvdata(pdev);
> > +
> > + crypto_engine_stop(se->engine);
> > + crypto_engine_exit(se->engine);
> > + iommu_fwspec_free(se->dev);
> > + host1x_client_unregister(&se->client);
> > + tegra_se_clk_deinit(se);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct tegra_se_regs tegra234_aes1_regs = {
> > + .config = SE_AES1_CFG,
> > + .op = SE_AES1_OPERATION,
> > + .last_blk = SE_AES1_LAST_BLOCK,
> > + .linear_ctr = SE_AES1_LINEAR_CTR,
> > + .aad_len = SE_AES1_AAD_LEN,
> > + .cryp_msg_len = SE_AES1_CRYPTO_MSG_LEN,
> > + .manifest = SE_AES1_KEYMANIFEST,
> > + .key_addr = SE_AES1_KEY_ADDR,
> > + .key_data = SE_AES1_KEY_DATA,
> > + .key_dst = SE_AES1_KEY_DST,
> > + .result = SE_AES1_CMAC_RESULT,
> > +};
> > +
> > +static const struct tegra_se_regs tegra234_hash_regs = {
> > + .config = SE_SHA_CFG,
> > + .op = SE_SHA_OPERATION,
> > + .manifest = SE_SHA_KEYMANIFEST,
> > + .key_addr = SE_SHA_KEY_ADDR,
> > + .key_data = SE_SHA_KEY_DATA,
> > + .key_dst = SE_SHA_KEY_DST,
> > + .result = SE_SHA_HASH_RESULT,
> > +};
> > +
> > +static const struct tegra_se_hw tegra234_aes_hw = {
> > + .regs = &tegra234_aes1_regs,
> > + .kac_ver = 1,
> > + .host1x_class = 0x3b,
> > + .init_alg = tegra_init_aes,
> > + .deinit_alg = tegra_deinit_aes,
> > +};
> > +
> > +static const struct tegra_se_hw tegra234_hash_hw = {
> > + .regs = &tegra234_hash_regs,
> > + .kac_ver = 1,
> > + .host1x_class = 0x3d,
> > + .init_alg = tegra_init_hash,
> > + .deinit_alg = tegra_deinit_hash, };
> > +
> > +static const struct of_device_id tegra_se_of_match[] = {
> > + {
> > + .compatible = "nvidia,tegra234-se2-aes",
> > + .data = &tegra234_aes_hw
> > + }, {
> > + .compatible = "nvidia,tegra234-se4-hash",
> > + .data = &tegra234_hash_hw,
> > + },
> > + { },
> > +};
> > +MODULE_DEVICE_TABLE(of, tegra_se_of_match);
> > +
> > +static struct platform_driver tegra_se_driver = {
> > + .driver = {
> > + .name = "tegra-se",
> > + .of_match_table = tegra_se_of_match,
> > + },
> > + .probe = tegra_se_probe,
> > + .remove = tegra_se_remove,
> > +};
> > +
> > +static int tegra_se_host1x_probe(struct host1x_device *dev) {
> > + return host1x_device_init(dev);
> > +}
> > +
> > +static int tegra_se_host1x_remove(struct host1x_device *dev) {
> > + host1x_device_exit(dev);
> > +
> > + return 0;
> > +}
> > +
>
>
> ...
>
> > + return -EINVAL;
> > +}
> > +
> > +/* Functions */
> > +int tegra_init_aead(struct tegra_se *se);
>
> I look for it and cannot find it... Drop.
>
> > +int tegra_init_aes(struct tegra_se *se); int tegra_init_hash(struct
> > +tegra_se *se); void tegra_deinit_aes(struct tegra_se *se); void
> > +tegra_deinit_hash(struct tegra_se *se);
> > +
> > +int tegra_key_submit(struct tegra_se *se, const u8 *key, u32 keylen,
> > +u32 alg, u32 *keyid); unsigned int tegra_key_get_idx(struct tegra_se
> > +*se, u32 keyid); void tegra_key_invalidate(struct tegra_se *se, u32
> > +keyid, u32 alg);
> > +
> > +int tegra_se_host1x_register(struct tegra_se *se); int
> > +tegra_se_host1x_submit(struct tegra_se *se, u32 size);
>
> Everything looks bogus...
>
> > +
> > +static inline void se_writel(struct tegra_se *se, u32 val,
> > + unsigned int offset) {
> > + writel_relaxed(val, se->base + offset); }
> > +
> > +static inline u32 se_readl(struct tegra_se *se, unsigned int offset)
> > +{
> > + return readl_relaxed(se->base + offset); }
>
> Both wrappers are useless.
>
> > +
> > +/****
> > + *
>
> Use Linux coding style comments.
>
> > + * HOST1x OPCODES
> > + *
> > + ****/
> > +
>
> ...
>
> > +
> > +static inline u32 host1x_opcode_nonincr(unsigned int offset, unsigned
> > +int count) {
> > + return (2 << 28) | (offset << 16) | count; }
> > +
> > +static inline u32 host1x_uclass_incr_syncpt_cond_f(u32 v) {
> > + return (v & 0xff) << 10;
>
> Fix indentation, in other places as well.
>
>
> Best regards,
> Krzysztof
Thanks for the comments. Updated and posted a new version with the changes.
Regards,
Akhil
