On 13/12/2023 13:20, Akhil R wrote:
> Add support for Tegra Security Engine which can accelerates various
> crypto algorithms. The Engine has two separate instances within for
> AES and HASH algorithms respectively.
>
> The driver registers two crypto engines - one for AES and another for
> HASH algorithms and these operate independently and both uses the host1x
> bus. Additionally, it provides hardware-assisted key protection for up
> to 15 symmetric keys which it can use for the cipher operations.
>
> Signed-off-by: Akhil R <akhilrajeev@xxxxxxxxxx>
> ---
...
> +
> +int tegra_init_hash(struct tegra_se *se)
> +{
> + struct ahash_engine_alg *alg;
> + int i, ret;
> +
> + se->manifest = tegra_hash_kac_manifest;
> +
> + for (i = 0; i < ARRAY_SIZE(tegra_hash_algs); i++) {
> + tegra_hash_algs[i].se_dev = se;
> + alg = &tegra_hash_algs[i].alg.ahash;
> +
> + ret = crypto_engine_register_ahash(alg);
> + if (ret) {
> + dev_err(se->dev, "failed to register %s\n",
> + alg->base.halg.base.cra_name);
> + goto sha_err;
> + }
> + }
> +
> + dev_info(se->dev, "registered HASH algorithms\n");
Drop, not needed. Actually drop simple success messages. Drivers do not
spam dmesg without need.
...
> +
> +int tegra_se_host1x_register(struct tegra_se *se)
> +{
> + INIT_LIST_HEAD(&se->client.list);
> + se->client.dev = se->dev;
> + se->client.ops = &tegra_se_client_ops;
> + se->client.class = se->hw->host1x_class;
> + se->client.num_syncpts = 1;
> +
> + host1x_client_register(&se->client);
> +
> + return 0;
> +}
> +
> +static int tegra_se_clk_init(struct tegra_se *se)
> +{
> + int i, ret;
> +
> + se->clk = devm_clk_get(se->dev, NULL);
> + if (IS_ERR(se->clk)) {
> + dev_err(se->dev, "failed to get clock\n");
Why do you print failures multiple times? Once here, second in probe.
return dev_err_probe
> + return PTR_ERR(se->clk);
> + }
> +
> + ret = clk_set_rate(se->clk, ULONG_MAX);
> + if (ret) {
> + dev_err(se->dev, "failed to set %d clock rate", i);
Same comments
> + return ret;
> + }
> +
> + ret = clk_prepare_enable(se->clk);
> + if (ret) {
> + dev_err(se->dev, "failed to enable clocks\n");
Same comments
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static void tegra_se_clk_deinit(struct tegra_se *se)
> +{
> + clk_disable_unprepare(se->clk);
Why aren't you using devm_clk_get_enabled? This looks like porting some
old, out-of-tree vendor crappy driver :(
> +}
> +
> +static int tegra_se_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct tegra_se *se;
> + int ret;
> +
> + se = devm_kzalloc(dev, sizeof(*se), GFP_KERNEL);
> + if (!se)
> + return -ENOMEM;
> +
> + se->dev = dev;
> + se->owner = TEGRA_GPSE_ID;
> + se->hw = device_get_match_data(&pdev->dev);
> +
> + se->base = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(se->base))
> + return PTR_ERR(se->base);
> +
> + dma_set_mask_and_coherent(dev, DMA_BIT_MASK(39));
> + platform_set_drvdata(pdev, se);
> +
> + ret = tegra_se_clk_init(se);
> + if (ret) {
> + dev_err(dev, "failed to init clocks\n");
Syntax is:
return dev_err_probe
> + return ret;
> + }
> +
> + if (!tegra_dev_iommu_get_stream_id(dev, &se->stream_id)) {
> + dev_err(dev, "failed to get IOMMU stream ID\n");
dev_err_probe
> + goto clk_deinit;
> + }
> +
> + se_writel(se, se->stream_id, SE_STREAM_ID);
> +
> + se->engine = crypto_engine_alloc_init(dev, 0);
> + if (!se->engine) {
> + dev_err(dev, "failed to init crypto engine\n");
Really? Test your code with coccinelle. Drop.
> + ret = -ENOMEM;
> + goto iommu_free;
> + }
> +
> + ret = crypto_engine_start(se->engine);
> + if (ret) {
> + dev_err(dev, "failed to start crypto engine\n");
dev_err_probe
> + goto engine_exit;
> + }
> +
> + ret = tegra_se_host1x_register(se);
> + if (ret) {
> + dev_err(dev, "failed to init host1x params\n");
dev_err_probe
> + goto engine_stop;
> + }
> +
> + return 0;
> +
> +engine_stop:
> + crypto_engine_stop(se->engine);
> +engine_exit:
> + crypto_engine_exit(se->engine);
> +iommu_free:
> + iommu_fwspec_free(se->dev);
> +clk_deinit:
> + tegra_se_clk_deinit(se);
> +
> + return ret;
> +}
> +
> +static int tegra_se_remove(struct platform_device *pdev)
> +{
> + struct tegra_se *se = platform_get_drvdata(pdev);
> +
> + crypto_engine_stop(se->engine);
> + crypto_engine_exit(se->engine);
> + iommu_fwspec_free(se->dev);
> + host1x_client_unregister(&se->client);
> + tegra_se_clk_deinit(se);
> +
> + return 0;
> +}
> +
> +static const struct tegra_se_regs tegra234_aes1_regs = {
> + .config = SE_AES1_CFG,
> + .op = SE_AES1_OPERATION,
> + .last_blk = SE_AES1_LAST_BLOCK,
> + .linear_ctr = SE_AES1_LINEAR_CTR,
> + .aad_len = SE_AES1_AAD_LEN,
> + .cryp_msg_len = SE_AES1_CRYPTO_MSG_LEN,
> + .manifest = SE_AES1_KEYMANIFEST,
> + .key_addr = SE_AES1_KEY_ADDR,
> + .key_data = SE_AES1_KEY_DATA,
> + .key_dst = SE_AES1_KEY_DST,
> + .result = SE_AES1_CMAC_RESULT,
> +};
> +
> +static const struct tegra_se_regs tegra234_hash_regs = {
> + .config = SE_SHA_CFG,
> + .op = SE_SHA_OPERATION,
> + .manifest = SE_SHA_KEYMANIFEST,
> + .key_addr = SE_SHA_KEY_ADDR,
> + .key_data = SE_SHA_KEY_DATA,
> + .key_dst = SE_SHA_KEY_DST,
> + .result = SE_SHA_HASH_RESULT,
> +};
> +
> +static const struct tegra_se_hw tegra234_aes_hw = {
> + .regs = &tegra234_aes1_regs,
> + .kac_ver = 1,
> + .host1x_class = 0x3b,
> + .init_alg = tegra_init_aes,
> + .deinit_alg = tegra_deinit_aes,
> +};
> +
> +static const struct tegra_se_hw tegra234_hash_hw = {
> + .regs = &tegra234_hash_regs,
> + .kac_ver = 1,
> + .host1x_class = 0x3d,
> + .init_alg = tegra_init_hash,
> + .deinit_alg = tegra_deinit_hash,
> +};
> +
> +static const struct of_device_id tegra_se_of_match[] = {
> + {
> + .compatible = "nvidia,tegra234-se2-aes",
> + .data = &tegra234_aes_hw
> + }, {
> + .compatible = "nvidia,tegra234-se4-hash",
> + .data = &tegra234_hash_hw,
> + },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, tegra_se_of_match);
> +
> +static struct platform_driver tegra_se_driver = {
> + .driver = {
> + .name = "tegra-se",
> + .of_match_table = tegra_se_of_match,
> + },
> + .probe = tegra_se_probe,
> + .remove = tegra_se_remove,
> +};
> +
> +static int tegra_se_host1x_probe(struct host1x_device *dev)
> +{
> + return host1x_device_init(dev);
> +}
> +
> +static int tegra_se_host1x_remove(struct host1x_device *dev)
> +{
> + host1x_device_exit(dev);
> +
> + return 0;
> +}
> +
...
> + return -EINVAL;
> +}
> +
> +/* Functions */
> +int tegra_init_aead(struct tegra_se *se);
I look for it and cannot find it... Drop.
> +int tegra_init_aes(struct tegra_se *se);
> +int tegra_init_hash(struct tegra_se *se);
> +void tegra_deinit_aes(struct tegra_se *se);
> +void tegra_deinit_hash(struct tegra_se *se);
> +
> +int tegra_key_submit(struct tegra_se *se, const u8 *key, u32 keylen, u32 alg, u32 *keyid);
> +unsigned int tegra_key_get_idx(struct tegra_se *se, u32 keyid);
> +void tegra_key_invalidate(struct tegra_se *se, u32 keyid, u32 alg);
> +
> +int tegra_se_host1x_register(struct tegra_se *se);
> +int tegra_se_host1x_submit(struct tegra_se *se, u32 size);
Everything looks bogus...
> +
> +static inline void se_writel(struct tegra_se *se, u32 val,
> + unsigned int offset)
> +{
> + writel_relaxed(val, se->base + offset);
> +}
> +
> +static inline u32 se_readl(struct tegra_se *se, unsigned int offset)
> +{
> + return readl_relaxed(se->base + offset);
> +}
Both wrappers are useless.
> +
> +/****
> + *
Use Linux coding style comments.
> + * HOST1x OPCODES
> + *
> + ****/
> +
...
> +
> +static inline u32 host1x_opcode_nonincr(unsigned int offset, unsigned int count)
> +{
> + return (2 << 28) | (offset << 16) | count;
> +}
> +
> +static inline u32 host1x_uclass_incr_syncpt_cond_f(u32 v)
> +{
> + return (v & 0xff) << 10;
Fix indentation, in other places as well.
Best regards,
Krzysztof
