From: Declan Murphy <declan.murphy@xxxxxxxxx>
Add support for the Hashing Control Unit (HCU) included in the Offload
Crypto Subsystem (OCS) of the Intel Keem Bay SoC, thus enabling
hardware-accelerated hashing on the Keem Bay SoC for the following
algorithms:
- sha256
- sha384
- sha512
- sm3
The driver is composed of two files:
- 'ocs-hcu.c' which interacts with the hardware and abstracts it by
providing an API following the usual paradigm used in hashing drivers
/ libraries (e.g., hash_init(), hash_update(), hash_final(), etc.).
NOTE: this API can block and sleep, since completions are used to wait
for the HW to complete the hashing.
- 'keembay-ocs-hcu-core.c' which exports the functionality provided by
'ocs-hcu.c' as a ahash crypto driver. The crypto engine is used to
provide asynchronous behavior. 'keembay-ocs-hcu-core.c' also takes
care of the DMA mapping of the input sg list.
The driver passes crypto manager self-tests, including the extra tests
(CRYPTO_MANAGER_EXTRA_TESTS=y).
Signed-off-by: Declan Murphy <declan.murphy@xxxxxxxxx>
Co-developed-by: Daniele Alessandrelli <daniele.alessandrelli@xxxxxxxxx>
Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@xxxxxxxxx>
Acked-by: Mark Gross <mgross@xxxxxxxxxxxxxxx>
---
drivers/crypto/keembay/Kconfig | 17 +
drivers/crypto/keembay/Makefile | 3 +
drivers/crypto/keembay/keembay-ocs-hcu-core.c | 830 ++++++++++++++++++
drivers/crypto/keembay/ocs-hcu.c | 684 +++++++++++++++
drivers/crypto/keembay/ocs-hcu.h | 98 +++
5 files changed, 1632 insertions(+)
create mode 100644 drivers/crypto/keembay/keembay-ocs-hcu-core.c
create mode 100644 drivers/crypto/keembay/ocs-hcu.c
create mode 100644 drivers/crypto/keembay/ocs-hcu.h
diff --git a/drivers/crypto/keembay/Kconfig b/drivers/crypto/keembay/Kconfig
index 3c16797b25b9..d207a4511b7e 100644
--- a/drivers/crypto/keembay/Kconfig
+++ b/drivers/crypto/keembay/Kconfig
@@ -37,3 +37,20 @@ config CRYPTO_DEV_KEEMBAY_OCS_AES_SM4_CTS
Provides OCS version of cts(cbc(aes)) and cts(cbc(sm4)).
Intel does not recommend use of CTS mode with AES/SM4.
+
+config CRYPTO_DEV_KEEMBAY_OCS_HCU
+ tristate "Support for Intel Keem Bay OCS HCU HW acceleration"
+ select CRYPTO_HASH
+ select CRYPTO_ENGINE
+ depends on OF || COMPILE_TEST
+ help
+ Support for Intel Keem Bay Offload and Crypto Subsystem (OCS) Hash
+ Control Unit (HCU) hardware acceleration for use with Crypto API.
+
+ Provides OCS HCU hardware acceleration of sha256, sha384, sha512, and
+ sm3.
+
+ Say Y or M if you're building for the Intel Keem Bay SoC. If compiled
+ as a module, the module will be called keembay-ocs-hcu.
+
+ If unsure, say N.
diff --git a/drivers/crypto/keembay/Makefile b/drivers/crypto/keembay/Makefile
index f21e2c4ab3b3..aea03d4432c4 100644
--- a/drivers/crypto/keembay/Makefile
+++ b/drivers/crypto/keembay/Makefile
@@ -3,3 +3,6 @@
#
obj-$(CONFIG_CRYPTO_DEV_KEEMBAY_OCS_AES_SM4) += keembay-ocs-aes.o
keembay-ocs-aes-objs := keembay-ocs-aes-core.o ocs-aes.o
+
+obj-$(CONFIG_CRYPTO_DEV_KEEMBAY_OCS_HCU) += keembay-ocs-hcu.o
+keembay-ocs-hcu-objs := keembay-ocs-hcu-core.o ocs-hcu.o
diff --git a/drivers/crypto/keembay/keembay-ocs-hcu-core.c b/drivers/crypto/keembay/keembay-ocs-hcu-core.c
new file mode 100644
index 000000000000..388cf9add757
--- /dev/null
+++ b/drivers/crypto/keembay/keembay-ocs-hcu-core.c
@@ -0,0 +1,830 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Intel Keem Bay OCS HCU Crypto Driver.
+ *
+ * Copyright (C) 2018-2020 Intel Corporation
+ */
+
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+
+#include <crypto/engine.h>
+#include <crypto/scatterwalk.h>
+#include <crypto/sha2.h>
+#include <crypto/sm3.h>
+#include <crypto/internal/hash.h>
+
+#include "ocs-hcu.h"
+
+#define DRV_NAME "keembay-ocs-hcu"
+
+/* Flag marking a final request. */
+#define REQ_FINAL BIT(0)
+
+/**
+ * struct ocs_hcu_ctx: OCS HCU Transform context.
+ * @engine_ctx: Crypto Engine context.
+ * @hcu_dev: The OCS HCU device used by the transformation.
+ * @is_sm3_tfm: Whether or not this is an SM3 transformation.
+ */
+struct ocs_hcu_ctx {
+ struct crypto_engine_ctx engine_ctx;
+ struct ocs_hcu_dev *hcu_dev;
+ bool is_sm3_tfm;
+};
+
+/**
+ * struct ocs_hcu_rctx - Context for the request.
+ * @hcu_dev: OCS HCU device to be used to service the request.
+ * @flags: Flags tracking request status.
+ * @algo: Algorithm to use for the request.
+ * @blk_sz: Block size of the transformation / request.
+ * @dig_sz: Digest size of the transformation / request.
+ * @dma_list: OCS DMA linked list.
+ * @hash_ctx: OCS HCU hashing context.
+ * @buffer: Buffer to store partial block of data.
+ * @buf_cnt: Number of bytes currently stored in the buffer.
+ * @buf_dma_addr: The DMA address of @buffer (when mapped).
+ * @buf_dma_count: The number of bytes in @buffer currently DMA-mapped.
+ * @sg: Head of the scatterlist entries containing data.
+ * @sg_data_total: Total data in the SG list at any time.
+ * @sg_data_offset: Offset into the data of the current individual SG node.
+ * @sg_dma_nents: Number of sg entries mapped in dma_list.
+ */
+struct ocs_hcu_rctx {
+ struct ocs_hcu_dev *hcu_dev;
+ u32 flags;
+ enum ocs_hcu_algo algo;
+ size_t blk_sz;
+ size_t dig_sz;
+ struct ocs_hcu_dma_list *dma_list;
+ struct ocs_hcu_hash_ctx hash_ctx;
+ u8 buffer[SHA512_BLOCK_SIZE];
+ size_t buf_cnt;
+ dma_addr_t buf_dma_addr;
+ size_t buf_dma_count;
+ struct scatterlist *sg;
+ unsigned int sg_data_total;
+ unsigned int sg_data_offset;
+ unsigned int sg_dma_nents;
+};
+
+/**
+ * struct ocs_hcu_drv - Driver data
+ * @dev_list: The list of HCU devices.
+ * @lock: The lock protecting dev_list.
+ */
+struct ocs_hcu_drv {
+ struct list_head dev_list;
+ spinlock_t lock; /* Protects dev_list. */
+};
+
+static struct ocs_hcu_drv ocs_hcu = {
+ .dev_list = LIST_HEAD_INIT(ocs_hcu.dev_list),
+ .lock = __SPIN_LOCK_UNLOCKED(ocs_hcu.lock),
+};
+
+/*
+ * Return the total amount of data in the request; that is: the data in the
+ * request buffer + the data in the sg list.
+ */
+static inline unsigned int kmb_get_total_data(struct ocs_hcu_rctx *rctx)
+{
+ return rctx->sg_data_total + rctx->buf_cnt;
+}
+
+/* Move remaining content of scatter-gather list to context buffer. */
+static int flush_sg_to_ocs_buffer(struct ocs_hcu_rctx *rctx)
+{
+ size_t count;
+
+ if (rctx->sg_data_total > (sizeof(rctx->buffer) - rctx->buf_cnt)) {
+ WARN(1, "%s: sg data does not fit in buffer\n", __func__);
+ return -EINVAL;
+ }
+
+ while (rctx->sg_data_total) {
+ if (!rctx->sg) {
+ WARN(1, "%s: unexpected NULL sg\n", __func__);
+ return -EINVAL;
+ }
+ /*
+ * If current sg has been fully processed, skip to the next
+ * one.
+ */
+ if (rctx->sg_data_offset == rctx->sg->length) {
+ rctx->sg = sg_next(rctx->sg);
+ rctx->sg_data_offset = 0;
+ continue;
+ }
+ /*
+ * Determine the maximum data available to copy from the node.
+ * Minimum of the length left in the sg node, or the total data
+ * in the request.
+ */
+ count = min(rctx->sg->length - rctx->sg_data_offset,
+ rctx->sg_data_total);
+ /* Copy from scatter-list entry to context buffer. */
+ scatterwalk_map_and_copy(&rctx->buffer[rctx->buf_cnt],
+ rctx->sg, rctx->sg_data_offset,
+ count, 0);
+
+ rctx->sg_data_offset += count;
+ rctx->sg_data_total -= count;
+ rctx->buf_cnt += count;
+ }
+
+ return 0;
+}
+
+static struct ocs_hcu_dev *kmb_ocs_hcu_find_dev(struct ahash_request *req)
+{
+ struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
+ struct ocs_hcu_ctx *tctx = crypto_ahash_ctx(tfm);
+
+ /* If the HCU device for the request was previously set, return it. */
+ if (tctx->hcu_dev)
+ return tctx->hcu_dev;
+
+ /*
+ * Otherwise, get the first HCU device available (there should be one
+ * and only one device).
+ */
+ spin_lock_bh(&ocs_hcu.lock);
+ tctx->hcu_dev = list_first_entry_or_null(&ocs_hcu.dev_list,
+ struct ocs_hcu_dev,
+ list);
+ spin_unlock_bh(&ocs_hcu.lock);
+
+ return tctx->hcu_dev;
+}
+
+/* Free OCS DMA linked list and DMA-able context buffer. */
+static void kmb_ocs_hcu_dma_cleanup(struct ahash_request *req,
+ struct ocs_hcu_rctx *rctx)
+{
+ struct ocs_hcu_dev *hcu_dev = rctx->hcu_dev;
+ struct device *dev = hcu_dev->dev;
+
+ /* Unmap rctx->buffer (if mapped). */
+ if (rctx->buf_dma_count) {
+ dma_unmap_single(dev, rctx->buf_dma_addr, rctx->buf_dma_count,
+ DMA_TO_DEVICE);
+ rctx->buf_dma_count = 0;
+ }
+
+ /* Unmap req->src (if mapped). */
+ if (rctx->sg_dma_nents) {
+ dma_unmap_sg(dev, req->src, rctx->sg_dma_nents, DMA_TO_DEVICE);
+ rctx->sg_dma_nents = 0;
+ }
+
+ /* Free dma_list (if allocated). */
+ if (rctx->dma_list) {
+ ocs_hcu_dma_list_free(hcu_dev, rctx->dma_list);
+ rctx->dma_list = NULL;
+ }
+}
+
+/*
+ * Prepare for DMA operation:
+ * - DMA-map request context buffer (if needed)
+ * - DMA-map SG list (only the entries to be processed, see note below)
+ * - Allocate OCS HCU DMA linked list (number of elements = SG entries to
+ * process + context buffer (if not empty)).
+ * - Add DMA-mapped request context buffer to OCS HCU DMA list.
+ * - Add SG entries to DMA list.
+ *
+ * Note: if this is a final request, we process all the data in the SG list,
+ * otherwise we can only process up to the maximum amount of block-aligned data
+ * (the remainder will be put into the context buffer and processed in the next
+ * request).
+ */
+static int kmb_ocs_dma_prepare(struct ahash_request *req)
+{
+ struct ocs_hcu_rctx *rctx = ahash_request_ctx(req);
+ struct device *dev = rctx->hcu_dev->dev;
+ unsigned int remainder = 0;
+ unsigned int total;
+ size_t nents;
+ size_t count;
+ int rc;
+ int i;
+
+ /* This function should be called only when there is data to process. */
+ total = kmb_get_total_data(rctx);
+ if (!total)
+ return -EINVAL;
+
+ /*
+ * If this is not a final DMA (terminated DMA), the data passed to the
+ * HCU must be aligned to the block size; compute the remainder data to
+ * be processed in the next request.
+ */
+ if (!(rctx->flags & REQ_FINAL))
+ remainder = total % rctx->blk_sz;
+
+ /* Determine the number of scatter gather list entries to process. */
+ nents = sg_nents_for_len(req->src, rctx->sg_data_total - remainder);
+
+ /* If there are entries to process, map them. */
+ if (nents) {
+ rctx->sg_dma_nents = dma_map_sg(dev, req->src, nents,
+ DMA_TO_DEVICE);
+ if (!rctx->sg_dma_nents) {
+ dev_err(dev, "Failed to MAP SG\n");
+ rc = -ENOMEM;
+ goto cleanup;
+ }
+ /*
+ * The value returned by dma_map_sg() can be < nents; so update
+ * nents accordingly.
+ */
+ nents = rctx->sg_dma_nents;
+ }
+
+ /*
+ * If context buffer is not empty, map it and add extra DMA entry for
+ * it.
+ */
+ if (rctx->buf_cnt) {
+ rctx->buf_dma_addr = dma_map_single(dev, rctx->buffer,
+ rctx->buf_cnt,
+ DMA_TO_DEVICE);
+ if (dma_mapping_error(dev, rctx->buf_dma_addr)) {
+ dev_err(dev, "Failed to map request context buffer\n");
+ rc = -ENOMEM;
+ goto cleanup;
+ }
+ rctx->buf_dma_count = rctx->buf_cnt;
+ /* Increase number of dma entries. */
+ nents++;
+ }
+
+ /* Allocate OCS HCU DMA list. */
+ rctx->dma_list = ocs_hcu_dma_list_alloc(rctx->hcu_dev, nents);
+ if (!rctx->dma_list) {
+ rc = -ENOMEM;
+ goto cleanup;
+ }
+
+ /* Add request context buffer (if previously DMA-mapped) */
+ if (rctx->buf_dma_count) {
+ rc = ocs_hcu_dma_list_add_tail(rctx->hcu_dev, rctx->dma_list,
+ rctx->buf_dma_addr,
+ rctx->buf_dma_count);
+ if (rc)
+ goto cleanup;
+ }
+
+ /* Add the SG nodes to be processed to the DMA linked list. */
+ for_each_sg(req->src, rctx->sg, rctx->sg_dma_nents, i) {
+ /*
+ * The number of bytes to add to the list entry is the minimum
+ * between:
+ * - The DMA length of the SG entry.
+ * - The data left to be processed.
+ */
+ count = min(rctx->sg_data_total - remainder,
+ sg_dma_len(rctx->sg) - rctx->sg_data_offset);
+ /*
+ * Do not create a zero length DMA descriptor. Check in case of
+ * zero length SG node.
+ */
+ if (count == 0)
+ continue;
+ /* Add sg to HCU DMA list. */
+ rc = ocs_hcu_dma_list_add_tail(rctx->hcu_dev,
+ rctx->dma_list,
+ rctx->sg->dma_address,
+ count);
+ if (rc)
+ goto cleanup;
+
+ /* Update amount of data remaining in SG list. */
+ rctx->sg_data_total -= count;
+
+ /*
+ * If remaining data is equal to remainder (note: 'less than'
+ * case should never happen in practice), we are done: update
+ * offset and exit the loop.
+ */
+ if (rctx->sg_data_total <= remainder) {
+ WARN_ON(rctx->sg_data_total < remainder);
+ rctx->sg_data_offset += count;
+ break;
+ }
+
+ /*
+ * If we get here is because we need to process the next sg in
+ * the list; set offset within the sg to 0.
+ */
+ rctx->sg_data_offset = 0;
+ }
+
+ return 0;
+cleanup:
+ dev_err(dev, "Failed to prepare DMA.\n");
+ kmb_ocs_hcu_dma_cleanup(req, rctx);
+
+ return rc;
+}
+
+static void kmb_ocs_hcu_secure_cleanup(struct ahash_request *req)
+{
+ struct ocs_hcu_rctx *rctx = ahash_request_ctx(req);
+
+ /* Clear buffer of any data. */
+ memzero_explicit(rctx->buffer, sizeof(rctx->buffer));
+}
+
+static int kmb_ocs_hcu_handle_queue(struct ahash_request *req)
+{
+ struct ocs_hcu_dev *hcu_dev = kmb_ocs_hcu_find_dev(req);
+
+ if (!hcu_dev)
+ return -ENOENT;
+
+ return crypto_transfer_hash_request_to_engine(hcu_dev->engine, req);
+}
+
+static int kmb_ocs_hcu_do_one_request(struct crypto_engine *engine, void *areq)
+{
+ struct ahash_request *req = container_of(areq, struct ahash_request,
+ base);
+ struct ocs_hcu_dev *hcu_dev = kmb_ocs_hcu_find_dev(req);
+ struct ocs_hcu_rctx *rctx = ahash_request_ctx(req);
+ int rc;
+
+ if (!hcu_dev) {
+ rc = -ENOENT;
+ goto error;
+ }
+
+ /* Handle update request case. */
+ if (!(rctx->flags & REQ_FINAL)) {
+ /* Update should always have input data. */
+ if (!kmb_get_total_data(rctx))
+ return -EINVAL;
+
+ /* Map input data into the HCU DMA linked list. */
+ rc = kmb_ocs_dma_prepare(req);
+ if (rc)
+ goto error;
+
+ /* Do hashing step. */
+ rc = ocs_hcu_hash_update(hcu_dev, &rctx->hash_ctx,
+ rctx->dma_list);
+
+ /* Unmap data and free DMA list regardless of return code. */
+ kmb_ocs_hcu_dma_cleanup(req, rctx);
+
+ /* Process previous return code. */
+ if (rc)
+ goto error;
+
+ /*
+ * Reset request buffer count (data in the buffer was just
+ * processed).
+ */
+ rctx->buf_cnt = 0;
+ /*
+ * Move remaining sg data into the request buffer, so that it
+ * will be processed during the next request.
+ *
+ * NOTE: we have remaining data if kmb_get_total_data() was not
+ * a multiple of block size.
+ */
+ rc = flush_sg_to_ocs_buffer(rctx);
+ if (rc)
+ goto error;
+
+ goto done;
+ }
+
+ /* If we get here, this is a final request. */
+
+ /* If there is data to process, use finup. */
+ if (kmb_get_total_data(rctx)) {
+ /* Map input data into the HCU DMA linked list. */
+ rc = kmb_ocs_dma_prepare(req);
+ if (rc)
+ goto error;
+
+ /* Do hashing step. */
+ rc = ocs_hcu_hash_finup(hcu_dev, &rctx->hash_ctx,
+ rctx->dma_list,
+ req->result, rctx->dig_sz);
+ /* Free DMA list regardless of return code. */
+ kmb_ocs_hcu_dma_cleanup(req, rctx);
+
+ /* Process previous return code. */
+ if (rc)
+ goto error;
+
+ } else { /* Otherwise (if we have no data), use final. */
+ rc = ocs_hcu_hash_final(hcu_dev, &rctx->hash_ctx, req->result,
+ rctx->dig_sz);
+ if (rc)
+ goto error;
+ }
+
+ /* Perform secure clean-up. */
+ kmb_ocs_hcu_secure_cleanup(req);
+done:
+ crypto_finalize_hash_request(hcu_dev->engine, req, 0);
+
+ return 0;
+
+error:
+ kmb_ocs_hcu_secure_cleanup(req);
+ return rc;
+}
+
+static int kmb_ocs_hcu_init(struct ahash_request *req)
+{
+ struct ocs_hcu_dev *hcu_dev = kmb_ocs_hcu_find_dev(req);
+ struct ocs_hcu_rctx *rctx = ahash_request_ctx(req);
+ struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
+ struct ocs_hcu_ctx *ctx = crypto_ahash_ctx(tfm);
+
+ if (!hcu_dev)
+ return -ENOENT;
+
+ /* Initialize entire request context to zero. */
+ memset(rctx, 0, sizeof(*rctx));
+
+ rctx->hcu_dev = hcu_dev;
+ rctx->dig_sz = crypto_ahash_digestsize(tfm);
+
+ switch (rctx->dig_sz) {
+ case SHA256_DIGEST_SIZE:
+ rctx->blk_sz = SHA256_BLOCK_SIZE;
+ /*
+ * SHA256 and SM3 have the same digest size: use info from tfm
+ * context to find out which one we should use.
+ */
+ rctx->algo = ctx->is_sm3_tfm ? OCS_HCU_ALGO_SM3 :
+ OCS_HCU_ALGO_SHA256;
+ break;
+ case SHA384_DIGEST_SIZE:
+ rctx->blk_sz = SHA384_BLOCK_SIZE;
+ rctx->algo = OCS_HCU_ALGO_SHA384;
+ break;
+ case SHA512_DIGEST_SIZE:
+ rctx->blk_sz = SHA512_BLOCK_SIZE;
+ rctx->algo = OCS_HCU_ALGO_SHA512;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* Initialize intermediate data. */
+ ocs_hcu_hash_init(&rctx->hash_ctx, rctx->algo);
+
+ return 0;
+}
+
+static int kmb_ocs_hcu_update(struct ahash_request *req)
+{
+ struct ocs_hcu_rctx *rctx = ahash_request_ctx(req);
+
+ if (!req->nbytes)
+ return 0;
+
+ rctx->sg_data_total = req->nbytes;
+ rctx->sg_data_offset = 0;
+ rctx->sg = req->src;
+
+ /*
+ * If remaining sg_data fits into ctx buffer, just copy it there; we'll
+ * process it at the next update() or final().
+ */
+ if (rctx->sg_data_total <= (sizeof(rctx->buffer) - rctx->buf_cnt))
+ return flush_sg_to_ocs_buffer(rctx);
+
+ return kmb_ocs_hcu_handle_queue(req);
+}
+
+static int kmb_ocs_hcu_final(struct ahash_request *req)
+{
+ struct ocs_hcu_rctx *rctx = ahash_request_ctx(req);
+
+ rctx->sg_data_total = 0;
+ rctx->sg_data_offset = 0;
+ rctx->sg = NULL;
+
+ rctx->flags |= REQ_FINAL;
+
+ return kmb_ocs_hcu_handle_queue(req);
+}
+
+static int kmb_ocs_hcu_finup(struct ahash_request *req)
+{
+ struct ocs_hcu_rctx *rctx = ahash_request_ctx(req);
+
+ rctx->sg_data_total = req->nbytes;
+ rctx->sg_data_offset = 0;
+ rctx->sg = req->src;
+
+ rctx->flags |= REQ_FINAL;
+
+ return kmb_ocs_hcu_handle_queue(req);
+}
+
+static int kmb_ocs_hcu_digest(struct ahash_request *req)
+{
+ int rc = 0;
+ struct ocs_hcu_dev *hcu_dev = kmb_ocs_hcu_find_dev(req);
+
+ if (!hcu_dev)
+ return -ENOENT;
+
+ rc = kmb_ocs_hcu_init(req);
+ if (rc)
+ return rc;
+
+ rc = kmb_ocs_hcu_finup(req);
+
+ return rc;
+}
+
+static int kmb_ocs_hcu_export(struct ahash_request *req, void *out)
+{
+ struct ocs_hcu_rctx *rctx = ahash_request_ctx(req);
+
+ /* Intermediate data is always stored and applied per request. */
+ memcpy(out, rctx, sizeof(*rctx));
+
+ return 0;
+}
+
+static int kmb_ocs_hcu_import(struct ahash_request *req, const void *in)
+{
+ struct ocs_hcu_rctx *rctx = ahash_request_ctx(req);
+
+ /* Intermediate data is always stored and applied per request. */
+ memcpy(rctx, in, sizeof(*rctx));
+
+ return 0;
+}
+
+/* Set request size and initialize tfm context. */
+static void __cra_init(struct crypto_tfm *tfm, struct ocs_hcu_ctx *ctx)
+{
+ crypto_ahash_set_reqsize(__crypto_ahash_cast(tfm),
+ sizeof(struct ocs_hcu_rctx));
+
+ /* Init context to 0. */
+ memzero_explicit(ctx, sizeof(*ctx));
+ /* Set engine ops. */
+ ctx->engine_ctx.op.do_one_request = kmb_ocs_hcu_do_one_request;
+}
+
+static int kmb_ocs_hcu_sha_cra_init(struct crypto_tfm *tfm)
+{
+ struct ocs_hcu_ctx *ctx = crypto_tfm_ctx(tfm);
+
+ __cra_init(tfm, ctx);
+
+ return 0;
+}
+
+static int kmb_ocs_hcu_sm3_cra_init(struct crypto_tfm *tfm)
+{
+ struct ocs_hcu_ctx *ctx = crypto_tfm_ctx(tfm);
+
+ __cra_init(tfm, ctx);
+
+ ctx->is_sm3_tfm = true;
+
+ return 0;
+}
+
+static struct ahash_alg ocs_hcu_algs[] = {
+{
+ .init = kmb_ocs_hcu_init,
+ .update = kmb_ocs_hcu_update,
+ .final = kmb_ocs_hcu_final,
+ .finup = kmb_ocs_hcu_finup,
+ .digest = kmb_ocs_hcu_digest,
+ .export = kmb_ocs_hcu_export,
+ .import = kmb_ocs_hcu_import,
+ .halg = {
+ .digestsize = SHA256_DIGEST_SIZE,
+ .statesize = sizeof(struct ocs_hcu_rctx),
+ .base = {
+ .cra_name = "sha256",
+ .cra_driver_name = "sha256-keembay-ocs",
+ .cra_priority = 255,
+ .cra_flags = CRYPTO_ALG_ASYNC,
+ .cra_blocksize = SHA256_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct ocs_hcu_ctx),
+ .cra_alignmask = 0,
+ .cra_module = THIS_MODULE,
+ .cra_init = kmb_ocs_hcu_sha_cra_init,
+ }
+ }
+},
+{
+ .init = kmb_ocs_hcu_init,
+ .update = kmb_ocs_hcu_update,
+ .final = kmb_ocs_hcu_final,
+ .finup = kmb_ocs_hcu_finup,
+ .digest = kmb_ocs_hcu_digest,
+ .export = kmb_ocs_hcu_export,
+ .import = kmb_ocs_hcu_import,
+ .halg = {
+ .digestsize = SM3_DIGEST_SIZE,
+ .statesize = sizeof(struct ocs_hcu_rctx),
+ .base = {
+ .cra_name = "sm3",
+ .cra_driver_name = "sm3-keembay-ocs",
+ .cra_priority = 255,
+ .cra_flags = CRYPTO_ALG_ASYNC,
+ .cra_blocksize = SM3_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct ocs_hcu_ctx),
+ .cra_alignmask = 0,
+ .cra_module = THIS_MODULE,
+ .cra_init = kmb_ocs_hcu_sm3_cra_init,
+ }
+ }
+},
+{
+ .init = kmb_ocs_hcu_init,
+ .update = kmb_ocs_hcu_update,
+ .final = kmb_ocs_hcu_final,
+ .finup = kmb_ocs_hcu_finup,
+ .digest = kmb_ocs_hcu_digest,
+ .export = kmb_ocs_hcu_export,
+ .import = kmb_ocs_hcu_import,
+ .halg = {
+ .digestsize = SHA384_DIGEST_SIZE,
+ .statesize = sizeof(struct ocs_hcu_rctx),
+ .base = {
+ .cra_name = "sha384",
+ .cra_driver_name = "sha384-keembay-ocs",
+ .cra_priority = 255,
+ .cra_flags = CRYPTO_ALG_ASYNC,
+ .cra_blocksize = SHA384_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct ocs_hcu_ctx),
+ .cra_alignmask = 0,
+ .cra_module = THIS_MODULE,
+ .cra_init = kmb_ocs_hcu_sha_cra_init,
+ }
+ }
+},
+{
+ .init = kmb_ocs_hcu_init,
+ .update = kmb_ocs_hcu_update,
+ .final = kmb_ocs_hcu_final,
+ .finup = kmb_ocs_hcu_finup,
+ .digest = kmb_ocs_hcu_digest,
+ .export = kmb_ocs_hcu_export,
+ .import = kmb_ocs_hcu_import,
+ .halg = {
+ .digestsize = SHA512_DIGEST_SIZE,
+ .statesize = sizeof(struct ocs_hcu_rctx),
+ .base = {
+ .cra_name = "sha512",
+ .cra_driver_name = "sha512-keembay-ocs",
+ .cra_priority = 255,
+ .cra_flags = CRYPTO_ALG_ASYNC,
+ .cra_blocksize = SHA512_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct ocs_hcu_ctx),
+ .cra_alignmask = 0,
+ .cra_module = THIS_MODULE,
+ .cra_init = kmb_ocs_hcu_sha_cra_init,
+ }
+ }
+},
+};
+
+/* Device tree driver match. */
+static const struct of_device_id kmb_ocs_hcu_of_match[] = {
+ {
+ .compatible = "intel,keembay-ocs-hcu",
+ },
+ {}
+};
+
+static int kmb_ocs_hcu_remove(struct platform_device *pdev)
+{
+ struct ocs_hcu_dev *hcu_dev;
+ int rc;
+
+ hcu_dev = platform_get_drvdata(pdev);
+ if (!hcu_dev)
+ return -ENODEV;
+
+ crypto_unregister_ahashes(ocs_hcu_algs, ARRAY_SIZE(ocs_hcu_algs));
+
+ rc = crypto_engine_exit(hcu_dev->engine);
+
+ spin_lock_bh(&ocs_hcu.lock);
+ list_del(&hcu_dev->list);
+ spin_unlock_bh(&ocs_hcu.lock);
+
+ return rc;
+}
+
+static int kmb_ocs_hcu_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct ocs_hcu_dev *hcu_dev;
+ struct resource *hcu_mem;
+ int rc;
+
+ hcu_dev = devm_kzalloc(dev, sizeof(*hcu_dev), GFP_KERNEL);
+ if (!hcu_dev)
+ return -ENOMEM;
+
+ hcu_dev->dev = dev;
+
+ platform_set_drvdata(pdev, hcu_dev);
+ rc = dma_set_mask_and_coherent(&pdev->dev, OCS_HCU_DMA_BIT_MASK);
+ if (rc)
+ return rc;
+
+ /* Get the memory address and remap. */
+ hcu_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!hcu_mem) {
+ dev_err(dev, "Could not retrieve io mem resource.\n");
+ return -ENODEV;
+ }
+
+ hcu_dev->io_base = devm_ioremap_resource(dev, hcu_mem);
+ if (IS_ERR(hcu_dev->io_base)) {
+ dev_err(dev, "Could not io-remap mem resource.\n");
+ return PTR_ERR(hcu_dev->io_base);
+ }
+
+ init_completion(&hcu_dev->irq_done);
+
+ /* Get and request IRQ. */
+ hcu_dev->irq = platform_get_irq(pdev, 0);
+ if (hcu_dev->irq < 0)
+ return hcu_dev->irq;
+
+ rc = devm_request_threaded_irq(&pdev->dev, hcu_dev->irq,
+ ocs_hcu_irq_handler, NULL, 0,
+ "keembay-ocs-hcu", hcu_dev);
+ if (rc < 0) {
+ dev_err(dev, "Could not request IRQ.\n");
+ return rc;
+ }
+
+ INIT_LIST_HEAD(&hcu_dev->list);
+
+ spin_lock_bh(&ocs_hcu.lock);
+ list_add_tail(&hcu_dev->list, &ocs_hcu.dev_list);
+ spin_unlock_bh(&ocs_hcu.lock);
+
+ /* Initialize crypto engine */
+ hcu_dev->engine = crypto_engine_alloc_init(dev, 1);
+ if (!hcu_dev->engine)
+ goto list_del;
+
+ rc = crypto_engine_start(hcu_dev->engine);
+ if (rc) {
+ dev_err(dev, "Could not start engine.\n");
+ goto cleanup;
+ }
+
+ /* Security infrastructure guarantees OCS clock is enabled. */
+
+ rc = crypto_register_ahashes(ocs_hcu_algs, ARRAY_SIZE(ocs_hcu_algs));
+ if (rc) {
+ dev_err(dev, "Could not register algorithms.\n");
+ goto cleanup;
+ }
+
+ return 0;
+
+cleanup:
+ crypto_engine_exit(hcu_dev->engine);
+list_del:
+ spin_lock_bh(&ocs_hcu.lock);
+ list_del(&hcu_dev->list);
+ spin_unlock_bh(&ocs_hcu.lock);
+
+ return rc;
+}
+
+/* The OCS driver is a platform device. */
+static struct platform_driver kmb_ocs_hcu_driver = {
+ .probe = kmb_ocs_hcu_probe,
+ .remove = kmb_ocs_hcu_remove,
+ .driver = {
+ .name = DRV_NAME,
+ .of_match_table = kmb_ocs_hcu_of_match,
+ },
+};
+
+module_platform_driver(kmb_ocs_hcu_driver);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/crypto/keembay/ocs-hcu.c b/drivers/crypto/keembay/ocs-hcu.c
new file mode 100644
index 000000000000..6a80a31d0b00
--- /dev/null
+++ b/drivers/crypto/keembay/ocs-hcu.c
@@ -0,0 +1,684 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Intel Keem Bay OCS HCU Crypto Driver.
+ *
+ * Copyright (C) 2018-2020 Intel Corporation
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/iopoll.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+
+#include <crypto/sha2.h>
+
+#include "ocs-hcu.h"
+
+/* Registers. */
+#define OCS_HCU_MODE 0x00
+#define OCS_HCU_CHAIN 0x04
+#define OCS_HCU_OPERATION 0x08
+#define OCS_HCU_KEY_0 0x0C
+#define OCS_HCU_ISR 0x50
+#define OCS_HCU_IER 0x54
+#define OCS_HCU_STATUS 0x58
+#define OCS_HCU_MSG_LEN_LO 0x60
+#define OCS_HCU_MSG_LEN_HI 0x64
+#define OCS_HCU_KEY_BYTE_ORDER_CFG 0x80
+#define OCS_HCU_DMA_SRC_ADDR 0x400
+#define OCS_HCU_DMA_SRC_SIZE 0x408
+#define OCS_HCU_DMA_DST_SIZE 0x40C
+#define OCS_HCU_DMA_DMA_MODE 0x410
+#define OCS_HCU_DMA_NEXT_SRC_DESCR 0x418
+#define OCS_HCU_DMA_MSI_ISR 0x480
+#define OCS_HCU_DMA_MSI_IER 0x484
+#define OCS_HCU_DMA_MSI_MASK 0x488
+
+/* Register bit definitions. */
+#define HCU_MODE_ALGO_SHIFT 16
+#define HCU_MODE_HMAC_SHIFT 22
+
+#define HCU_STATUS_BUSY BIT(0)
+
+#define HCU_BYTE_ORDER_SWAP BIT(0)
+
+#define HCU_IRQ_HASH_DONE BIT(2)
+#define HCU_IRQ_HASH_ERR_MASK (BIT(3) | BIT(1) | BIT(0))
+
+#define HCU_DMA_IRQ_SRC_DONE BIT(0)
+#define HCU_DMA_IRQ_SAI_ERR BIT(2)
+#define HCU_DMA_IRQ_BAD_COMP_ERR BIT(3)
+#define HCU_DMA_IRQ_INBUF_RD_ERR BIT(4)
+#define HCU_DMA_IRQ_INBUF_WD_ERR BIT(5)
+#define HCU_DMA_IRQ_OUTBUF_WR_ERR BIT(6)
+#define HCU_DMA_IRQ_OUTBUF_RD_ERR BIT(7)
+#define HCU_DMA_IRQ_CRD_ERR BIT(8)
+#define HCU_DMA_IRQ_ERR_MASK (HCU_DMA_IRQ_SAI_ERR | \
+ HCU_DMA_IRQ_BAD_COMP_ERR | \
+ HCU_DMA_IRQ_INBUF_RD_ERR | \
+ HCU_DMA_IRQ_INBUF_WD_ERR | \
+ HCU_DMA_IRQ_OUTBUF_WR_ERR | \
+ HCU_DMA_IRQ_OUTBUF_RD_ERR | \
+ HCU_DMA_IRQ_CRD_ERR)
+
+#define HCU_DMA_SNOOP_MASK (0x7 << 28)
+#define HCU_DMA_SRC_LL_EN BIT(25)
+#define HCU_DMA_EN BIT(31)
+
+#define OCS_HCU_ENDIANNESS_VALUE 0x2A
+
+#define HCU_DMA_MSI_UNMASK BIT(0)
+#define HCU_DMA_MSI_DISABLE 0
+#define HCU_IRQ_DISABLE 0
+
+#define OCS_HCU_START BIT(0)
+#define OCS_HCU_TERMINATE BIT(1)
+
+#define OCS_LL_DMA_FLAG_TERMINATE BIT(31)
+
+#define OCS_HCU_HW_KEY_LEN_U32 (OCS_HCU_HW_KEY_LEN / sizeof(u32))
+
+#define HCU_DATA_WRITE_ENDIANNESS_OFFSET 26
+
+#define OCS_HCU_NUM_CHAINS_SHA256_224_SM3 (SHA256_DIGEST_SIZE / sizeof(u32))
+#define OCS_HCU_NUM_CHAINS_SHA384_512 (SHA512_DIGEST_SIZE / sizeof(u32))
+
+/*
+ * While polling on a busy HCU, wait maximum 200us between one check and the
+ * other.
+ */
+#define OCS_HCU_WAIT_BUSY_RETRY_DELAY_US 200
+/* Wait on a busy HCU for maximum 1 second. */
+#define OCS_HCU_WAIT_BUSY_TIMEOUT_US 1000000
+
+/**
+ * struct ocs_hcu_dma_list - An entry in an OCS DMA linked list.
+ * @src_addr: Source address of the data.
+ * @src_len: Length of data to be fetched.
+ * @nxt_desc: Next descriptor to fetch.
+ * @ll_flags: Flags (Freeze @ terminate) for the DMA engine.
+ */
+struct ocs_hcu_dma_entry {
+ u32 src_addr;
+ u32 src_len;
+ u32 nxt_desc;
+ u32 ll_flags;
+};
+
+/**
+ * struct ocs_dma_list - OCS-specific DMA linked list.
+ * @head: The head of the list (points to the array backing the list).
+ * @tail: The current tail of the list; NULL if the list is empty.
+ * @dma_addr: The DMA address of @head (i.e., the DMA address of the backing
+ * array).
+ * @max_nents: Maximum number of entries in the list (i.e., number of elements
+ * in the backing array).
+ *
+ * The OCS DMA list is an array-backed list of OCS DMA descriptors. The array
+ * backing the list is allocated with dma_alloc_coherent() and pointed by
+ * @head.
+ */
+struct ocs_hcu_dma_list {
+ struct ocs_hcu_dma_entry *head;
+ struct ocs_hcu_dma_entry *tail;
+ dma_addr_t dma_addr;
+ size_t max_nents;
+};
+
+static inline u32 ocs_hcu_num_chains(enum ocs_hcu_algo algo)
+{
+ switch (algo) {
+ case OCS_HCU_ALGO_SHA224:
+ case OCS_HCU_ALGO_SHA256:
+ case OCS_HCU_ALGO_SM3:
+ return OCS_HCU_NUM_CHAINS_SHA256_224_SM3;
+ case OCS_HCU_ALGO_SHA384:
+ case OCS_HCU_ALGO_SHA512:
+ return OCS_HCU_NUM_CHAINS_SHA384_512;
+ default:
+ return 0;
+ };
+}
+
+static inline u32 ocs_hcu_digest_size(enum ocs_hcu_algo algo)
+{
+ switch (algo) {
+ case OCS_HCU_ALGO_SHA224:
+ return SHA224_DIGEST_SIZE;
+ case OCS_HCU_ALGO_SHA256:
+ case OCS_HCU_ALGO_SM3:
+ /* SM3 shares the same block size. */
+ return SHA256_DIGEST_SIZE;
+ case OCS_HCU_ALGO_SHA384:
+ return SHA384_DIGEST_SIZE;
+ case OCS_HCU_ALGO_SHA512:
+ return SHA512_DIGEST_SIZE;
+ default:
+ return 0;
+ }
+}
+
+/**
+ * ocs_hcu_wait_busy() - Wait for HCU OCS hardware to became usable.
+ * @hcu_dev: OCS HCU device to wait for.
+ *
+ * Return: 0 if device free, -ETIMEOUT if device busy and internal timeout has
+ * expired.
+ */
+static int ocs_hcu_wait_busy(struct ocs_hcu_dev *hcu_dev)
+{
+ long val;
+
+ return readl_poll_timeout(hcu_dev->io_base + OCS_HCU_STATUS, val,
+ !(val & HCU_STATUS_BUSY),
+ OCS_HCU_WAIT_BUSY_RETRY_DELAY_US,
+ OCS_HCU_WAIT_BUSY_TIMEOUT_US);
+}
+
+static void ocs_hcu_done_irq_en(struct ocs_hcu_dev *hcu_dev)
+{
+ /* Clear any pending interrupts. */
+ writel(0xFFFFFFFF, hcu_dev->io_base + OCS_HCU_ISR);
+ hcu_dev->irq_err = false;
+ /* Enable error and HCU done interrupts. */
+ writel(HCU_IRQ_HASH_DONE | HCU_IRQ_HASH_ERR_MASK,
+ hcu_dev->io_base + OCS_HCU_IER);
+}
+
+static void ocs_hcu_dma_irq_en(struct ocs_hcu_dev *hcu_dev)
+{
+ /* Clear any pending interrupts. */
+ writel(0xFFFFFFFF, hcu_dev->io_base + OCS_HCU_DMA_MSI_ISR);
+ hcu_dev->irq_err = false;
+ /* Only operating on DMA source completion and error interrupts. */
+ writel(HCU_DMA_IRQ_ERR_MASK | HCU_DMA_IRQ_SRC_DONE,
+ hcu_dev->io_base + OCS_HCU_DMA_MSI_IER);
+ /* Unmask */
+ writel(HCU_DMA_MSI_UNMASK, hcu_dev->io_base + OCS_HCU_DMA_MSI_MASK);
+}
+
+static void ocs_hcu_irq_dis(struct ocs_hcu_dev *hcu_dev)
+{
+ writel(HCU_IRQ_DISABLE, hcu_dev->io_base + OCS_HCU_IER);
+ writel(HCU_DMA_MSI_DISABLE, hcu_dev->io_base + OCS_HCU_DMA_MSI_IER);
+}
+
+static int ocs_hcu_wait_and_disable_irq(struct ocs_hcu_dev *hcu_dev)
+{
+ int rc;
+
+ rc = wait_for_completion_interruptible(&hcu_dev->irq_done);
+ if (rc)
+ goto exit;
+
+ if (hcu_dev->irq_err) {
+ /* Unset flag and return error. */
+ hcu_dev->irq_err = false;
+ rc = -EIO;
+ goto exit;
+ }
+
+exit:
+ ocs_hcu_irq_dis(hcu_dev);
+
+ return rc;
+}
+
+/**
+ * ocs_hcu_get_intermediate_data() - Get intermediate data.
+ * @hcu_dev: The target HCU device.
+ * @data: Where to store the intermediate.
+ * @algo: The algorithm being used.
+ *
+ * This function is used to save the current hashing process state in order to
+ * continue it in the future.
+ *
+ * Note: once all data has been processed, the intermediate data actually
+ * contains the hashing result. So this function is also used to retrieve the
+ * final result of a hashing process.
+ *
+ * Return: 0 on success, negative error code otherwise.
+ */
+static int ocs_hcu_get_intermediate_data(struct ocs_hcu_dev *hcu_dev,
+ struct ocs_hcu_idata *data,
+ enum ocs_hcu_algo algo)
+{
+ const int n = ocs_hcu_num_chains(algo);
+ u32 *chain;
+ int rc;
+ int i;
+
+ /* Data not requested. */
+ if (!data)
+ return -EINVAL;
+
+ chain = (u32 *)data->digest;
+
+ /* Ensure that the OCS is no longer busy before reading the chains. */
+ rc = ocs_hcu_wait_busy(hcu_dev);
+ if (rc)
+ return rc;
+
+ /*
+ * This loops is safe because data->digest is an array of
+ * SHA512_DIGEST_SIZE bytes and the maximum value returned by
+ * ocs_hcu_num_chains() is OCS_HCU_NUM_CHAINS_SHA384_512 which is equal
+ * to SHA512_DIGEST_SIZE / sizeof(u32).
+ */
+ for (i = 0; i < n; i++)
+ chain[i] = readl(hcu_dev->io_base + OCS_HCU_CHAIN);
+
+ data->msg_len_lo = readl(hcu_dev->io_base + OCS_HCU_MSG_LEN_LO);
+ data->msg_len_hi = readl(hcu_dev->io_base + OCS_HCU_MSG_LEN_HI);
+
+ return 0;
+}
+
+/**
+ * ocs_hcu_set_intermediate_data() - Set intermediate data.
+ * @hcu_dev: The target HCU device.
+ * @data: The intermediate data to be set.
+ * @algo: The algorithm being used.
+ *
+ * This function is used to continue a previous hashing process.
+ */
+static void ocs_hcu_set_intermediate_data(struct ocs_hcu_dev *hcu_dev,
+ const struct ocs_hcu_idata *data,
+ enum ocs_hcu_algo algo)
+{
+ const int n = ocs_hcu_num_chains(algo);
+ u32 *chain = (u32 *)data->digest;
+ int i;
+
+ /*
+ * This loops is safe because data->digest is an array of
+ * SHA512_DIGEST_SIZE bytes and the maximum value returned by
+ * ocs_hcu_num_chains() is OCS_HCU_NUM_CHAINS_SHA384_512 which is equal
+ * to SHA512_DIGEST_SIZE / sizeof(u32).
+ */
+ for (i = 0; i < n; i++)
+ writel(chain[i], hcu_dev->io_base + OCS_HCU_CHAIN);
+
+ writel(data->msg_len_lo, hcu_dev->io_base + OCS_HCU_MSG_LEN_LO);
+ writel(data->msg_len_hi, hcu_dev->io_base + OCS_HCU_MSG_LEN_HI);
+}
+
+static int ocs_hcu_get_digest(struct ocs_hcu_dev *hcu_dev,
+ enum ocs_hcu_algo algo, u8 *dgst, size_t dgst_len)
+{
+ u32 *chain;
+ int rc;
+ int i;
+
+ if (!dgst)
+ return -EINVAL;
+
+ /* Length of the output buffer must match the algo digest size. */
+ if (dgst_len != ocs_hcu_digest_size(algo))
+ return -EINVAL;
+
+ /* Ensure that the OCS is no longer busy before reading the chains. */
+ rc = ocs_hcu_wait_busy(hcu_dev);
+ if (rc)
+ return rc;
+
+ chain = (u32 *)dgst;
+ for (i = 0; i < dgst_len / sizeof(u32); i++)
+ chain[i] = readl(hcu_dev->io_base + OCS_HCU_CHAIN);
+
+ return 0;
+}
+
+/**
+ * ocs_hcu_hw_cfg() - Configure the HCU hardware.
+ * @hcu_dev: The HCU device to configure.
+ * @algo: The algorithm to be used by the HCU device.
+ * @use_hmac: Whether or not HW HMAC should be used.
+ *
+ * Return: 0 on success, negative error code otherwise.
+ */
+static int ocs_hcu_hw_cfg(struct ocs_hcu_dev *hcu_dev, enum ocs_hcu_algo algo,
+ bool use_hmac)
+{
+ u32 cfg;
+ int rc;
+
+ if (algo != OCS_HCU_ALGO_SHA256 && algo != OCS_HCU_ALGO_SHA224 &&
+ algo != OCS_HCU_ALGO_SHA384 && algo != OCS_HCU_ALGO_SHA512 &&
+ algo != OCS_HCU_ALGO_SM3)
+ return -EINVAL;
+
+ rc = ocs_hcu_wait_busy(hcu_dev);
+ if (rc)
+ return rc;
+
+ /* Ensure interrupts are disabled. */
+ ocs_hcu_irq_dis(hcu_dev);
+
+ /* Configure endianness, hashing algorithm and HW HMAC (if needed) */
+ cfg = OCS_HCU_ENDIANNESS_VALUE << HCU_DATA_WRITE_ENDIANNESS_OFFSET;
+ cfg |= algo << HCU_MODE_ALGO_SHIFT;
+ if (use_hmac)
+ cfg |= BIT(HCU_MODE_HMAC_SHIFT);
+
+ writel(cfg, hcu_dev->io_base + OCS_HCU_MODE);
+
+ return 0;
+}
+
+/**
+ * ocs_hcu_ll_dma_start() - Start OCS HCU hashing via DMA
+ * @hcu_dev: The OCS HCU device to use.
+ * @dma_list: The OCS DMA list mapping the data to hash.
+ * @finalize: Whether or not this is the last hashing operation and therefore
+ * the final hash should be compute even if data is not
+ * block-aligned.
+ *
+ * Return: 0 on success, negative error code otherwise.
+ */
+static int ocs_hcu_ll_dma_start(struct ocs_hcu_dev *hcu_dev,
+ const struct ocs_hcu_dma_list *dma_list,
+ bool finalize)
+{
+ u32 cfg = HCU_DMA_SNOOP_MASK | HCU_DMA_SRC_LL_EN | HCU_DMA_EN;
+ int rc;
+
+ if (!dma_list)
+ return -EINVAL;
+
+ /*
+ * For final requests we use HCU_DONE IRQ to be notified when all input
+ * data has been processed by the HCU; however, we cannot do so for
+ * non-final requests, because we don't get a HCU_DONE IRQ when we
+ * don't terminate the operation.
+ *
+ * Therefore, for non-final requests, we use the DMA IRQ, which
+ * triggers when DMA has finishing feeding all the input data to the
+ * HCU, but the HCU may still be processing it. This is fine, since we
+ * will wait for the HCU processing to be completed when we try to read
+ * intermediate results, in ocs_hcu_get_intermediate_data().
+ */
+ if (finalize)
+ ocs_hcu_done_irq_en(hcu_dev);
+ else
+ ocs_hcu_dma_irq_en(hcu_dev);
+
+ reinit_completion(&hcu_dev->irq_done);
+ writel(dma_list->dma_addr, hcu_dev->io_base + OCS_HCU_DMA_NEXT_SRC_DESCR);
+ writel(0, hcu_dev->io_base + OCS_HCU_DMA_SRC_SIZE);
+ writel(0, hcu_dev->io_base + OCS_HCU_DMA_DST_SIZE);
+
+ writel(OCS_HCU_START, hcu_dev->io_base + OCS_HCU_OPERATION);
+
+ writel(cfg, hcu_dev->io_base + OCS_HCU_DMA_DMA_MODE);
+
+ if (finalize)
+ writel(OCS_HCU_TERMINATE, hcu_dev->io_base + OCS_HCU_OPERATION);
+
+ rc = ocs_hcu_wait_and_disable_irq(hcu_dev);
+ if (rc)
+ return rc;
+
+ return 0;
+}
+
+struct ocs_hcu_dma_list *ocs_hcu_dma_list_alloc(struct ocs_hcu_dev *hcu_dev,
+ int max_nents)
+{
+ struct ocs_hcu_dma_list *dma_list;
+
+ dma_list = kmalloc(sizeof(*dma_list), GFP_KERNEL);
+ if (!dma_list)
+ return NULL;
+
+ /* Total size of the DMA list to allocate. */
+ dma_list->head = dma_alloc_coherent(hcu_dev->dev,
+ sizeof(*dma_list->head) * max_nents,
+ &dma_list->dma_addr, GFP_KERNEL);
+ if (!dma_list->head) {
+ kfree(dma_list);
+ return NULL;
+ }
+ dma_list->max_nents = max_nents;
+ dma_list->tail = NULL;
+
+ return dma_list;
+}
+
+void ocs_hcu_dma_list_free(struct ocs_hcu_dev *hcu_dev,
+ struct ocs_hcu_dma_list *dma_list)
+{
+ if (!dma_list)
+ return;
+
+ dma_free_coherent(hcu_dev->dev,
+ sizeof(*dma_list->head) * dma_list->max_nents,
+ dma_list->head, dma_list->dma_addr);
+
+ kfree(dma_list);
+}
+
+/* Add a new DMA entry at the end of the OCS DMA list. */
+int ocs_hcu_dma_list_add_tail(struct ocs_hcu_dev *hcu_dev,
+ struct ocs_hcu_dma_list *dma_list,
+ dma_addr_t addr, u32 len)
+{
+ struct device *dev = hcu_dev->dev;
+ struct ocs_hcu_dma_entry *old_tail;
+ struct ocs_hcu_dma_entry *new_tail;
+
+ if (!len)
+ return 0;
+
+ if (!dma_list)
+ return -EINVAL;
+
+ if (addr & ~OCS_HCU_DMA_BIT_MASK) {
+ dev_err(dev,
+ "Unexpected error: Invalid DMA address for OCS HCU\n");
+ return -EINVAL;
+ }
+
+ old_tail = dma_list->tail;
+ new_tail = old_tail ? old_tail + 1 : dma_list->head;
+
+ /* Check if list is full. */
+ if (new_tail - dma_list->head >= dma_list->max_nents)
+ return -ENOMEM;
+
+ /*
+ * If there was an old tail (i.e., this is not the first element we are
+ * adding), un-terminate the old tail and make it point to the new one.
+ */
+ if (old_tail) {
+ old_tail->ll_flags &= ~OCS_LL_DMA_FLAG_TERMINATE;
+ /*
+ * The old tail 'nxt_desc' must point to the DMA address of the
+ * new tail.
+ */
+ old_tail->nxt_desc = dma_list->dma_addr +
+ sizeof(*dma_list->tail) * (new_tail -
+ dma_list->head);
+ }
+
+ new_tail->src_addr = (u32)addr;
+ new_tail->src_len = (u32)len;
+ new_tail->ll_flags = OCS_LL_DMA_FLAG_TERMINATE;
+ new_tail->nxt_desc = 0;
+
+ /* Update list tail with new tail. */
+ dma_list->tail = new_tail;
+
+ return 0;
+}
+
+/**
+ * ocs_hcu_hash_init() - Initialize hash operation context.
+ * @ctx: The context to initialize.
+ * @algo: The hashing algorithm to use.
+ *
+ * Return: 0 on success, negative error code otherwise.
+ */
+int ocs_hcu_hash_init(struct ocs_hcu_hash_ctx *ctx, enum ocs_hcu_algo algo)
+{
+ if (!ctx)
+ return -EINVAL;
+
+ ctx->algo = algo;
+ ctx->idata.msg_len_lo = 0;
+ ctx->idata.msg_len_hi = 0;
+ /* No need to set idata.digest to 0. */
+
+ return 0;
+}
+
+/**
+ * ocs_hcu_digest() - Perform a hashing iteration.
+ * @hcu_dev: The OCS HCU device to use.
+ * @ctx: The OCS HCU hashing context.
+ * @dma_list: The OCS DMA list mapping the input data to process.
+ *
+ * Return: 0 on success; negative error code otherwise.
+ */
+int ocs_hcu_hash_update(struct ocs_hcu_dev *hcu_dev,
+ struct ocs_hcu_hash_ctx *ctx,
+ const struct ocs_hcu_dma_list *dma_list)
+{
+ int rc;
+
+ if (!hcu_dev || !ctx)
+ return -EINVAL;
+
+ /* Configure the hardware for the current request. */
+ rc = ocs_hcu_hw_cfg(hcu_dev, ctx->algo, false);
+ if (rc)
+ return rc;
+
+ /* If we already processed some data, idata needs to be set. */
+ if (ctx->idata.msg_len_lo || ctx->idata.msg_len_hi)
+ ocs_hcu_set_intermediate_data(hcu_dev, &ctx->idata, ctx->algo);
+
+ /* Start linked-list DMA hashing. */
+ rc = ocs_hcu_ll_dma_start(hcu_dev, dma_list, false);
+ if (rc)
+ return rc;
+
+ /* Update idata and return. */
+ return ocs_hcu_get_intermediate_data(hcu_dev, &ctx->idata, ctx->algo);
+}
+
+/**
+ * ocs_hcu_hash_final() - Update and finalize hash computation.
+ * @hcu_dev: The OCS HCU device to use.
+ * @ctx: The OCS HCU hashing context.
+ * @dma_list: The OCS DMA list mapping the input data to process.
+ * @dgst: The buffer where to save the computed digest.
+ * @dgst_len: The length of @dgst.
+ *
+ * Return: 0 on success; negative error code otherwise.
+ */
+int ocs_hcu_hash_finup(struct ocs_hcu_dev *hcu_dev,
+ const struct ocs_hcu_hash_ctx *ctx,
+ const struct ocs_hcu_dma_list *dma_list,
+ u8 *dgst, size_t dgst_len)
+{
+ int rc;
+
+ if (!hcu_dev || !ctx)
+ return -EINVAL;
+
+ /* Configure the hardware for the current request. */
+ rc = ocs_hcu_hw_cfg(hcu_dev, ctx->algo, false);
+ if (rc)
+ return rc;
+
+ /* If we already processed some data, idata needs to be set. */
+ if (ctx->idata.msg_len_lo || ctx->idata.msg_len_hi)
+ ocs_hcu_set_intermediate_data(hcu_dev, &ctx->idata, ctx->algo);
+
+ /* Start linked-list DMA hashing. */
+ rc = ocs_hcu_ll_dma_start(hcu_dev, dma_list, true);
+ if (rc)
+ return rc;
+
+ /* Get digest and return. */
+ return ocs_hcu_get_digest(hcu_dev, ctx->algo, dgst, dgst_len);
+}
+
+/**
+ * ocs_hcu_hash_final() - Finalize hash computation.
+ * @hcu_dev: The OCS HCU device to use.
+ * @ctx: The OCS HCU hashing context.
+ * @dgst: The buffer where to save the computed digest.
+ * @dgst_len: The length of @dgst.
+ *
+ * Return: 0 on success; negative error code otherwise.
+ */
+int ocs_hcu_hash_final(struct ocs_hcu_dev *hcu_dev,
+ const struct ocs_hcu_hash_ctx *ctx, u8 *dgst,
+ size_t dgst_len)
+{
+ int rc;
+
+ if (!hcu_dev || !ctx)
+ return -EINVAL;
+
+ /* Configure the hardware for the current request. */
+ rc = ocs_hcu_hw_cfg(hcu_dev, ctx->algo, false);
+ if (rc)
+ return rc;
+
+ /* If we already processed some data, idata needs to be set. */
+ if (ctx->idata.msg_len_lo || ctx->idata.msg_len_hi)
+ ocs_hcu_set_intermediate_data(hcu_dev, &ctx->idata, ctx->algo);
+
+ /*
+ * Enable HCU interrupts, so that HCU_DONE will be triggered once the
+ * final hash is computed.
+ */
+ ocs_hcu_done_irq_en(hcu_dev);
+ reinit_completion(&hcu_dev->irq_done);
+ writel(OCS_HCU_TERMINATE, hcu_dev->io_base + OCS_HCU_OPERATION);
+
+ rc = ocs_hcu_wait_and_disable_irq(hcu_dev);
+ if (rc)
+ return rc;
+
+ /* Get digest and return. */
+ return ocs_hcu_get_digest(hcu_dev, ctx->algo, dgst, dgst_len);
+}
+
+irqreturn_t ocs_hcu_irq_handler(int irq, void *dev_id)
+{
+ struct ocs_hcu_dev *hcu_dev = dev_id;
+ u32 hcu_irq;
+ u32 dma_irq;
+
+ /* Read and clear the HCU interrupt. */
+ hcu_irq = readl(hcu_dev->io_base + OCS_HCU_ISR);
+ writel(hcu_irq, hcu_dev->io_base + OCS_HCU_ISR);
+
+ /* Read and clear the HCU DMA interrupt. */
+ dma_irq = readl(hcu_dev->io_base + OCS_HCU_DMA_MSI_ISR);
+ writel(dma_irq, hcu_dev->io_base + OCS_HCU_DMA_MSI_ISR);
+
+ /* Check for errors. */
+ if (hcu_irq & HCU_IRQ_HASH_ERR_MASK || dma_irq & HCU_DMA_IRQ_ERR_MASK) {
+ hcu_dev->irq_err = true;
+ goto complete;
+ }
+
+ /* Check for DONE IRQs. */
+ if (hcu_irq & HCU_IRQ_HASH_DONE || dma_irq & HCU_DMA_IRQ_SRC_DONE)
+ goto complete;
+
+ return IRQ_NONE;
+
+complete:
+ complete(&hcu_dev->irq_done);
+
+ return IRQ_HANDLED;
+}
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/crypto/keembay/ocs-hcu.h b/drivers/crypto/keembay/ocs-hcu.h
new file mode 100644
index 000000000000..6a467dcaf99c
--- /dev/null
+++ b/drivers/crypto/keembay/ocs-hcu.h
@@ -0,0 +1,98 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Intel Keem Bay OCS HCU Crypto Driver.
+ *
+ * Copyright (C) 2018-2020 Intel Corporation
+ */
+
+#include <linux/dma-mapping.h>
+
+#ifndef _CRYPTO_OCS_HCU_H
+#define _CRYPTO_OCS_HCU_H
+
+#define OCS_HCU_DMA_BIT_MASK DMA_BIT_MASK(32)
+
+#define OCS_HCU_HW_KEY_LEN 64
+
+struct ocs_hcu_dma_list;
+
+enum ocs_hcu_algo {
+ OCS_HCU_ALGO_SHA256 = 2,
+ OCS_HCU_ALGO_SHA224 = 3,
+ OCS_HCU_ALGO_SHA384 = 4,
+ OCS_HCU_ALGO_SHA512 = 5,
+ OCS_HCU_ALGO_SM3 = 6,
+};
+
+/**
+ * struct ocs_hcu_dev - OCS HCU device context.
+ * @list: List of device contexts.
+ * @dev: OCS HCU device.
+ * @io_base: Base address of OCS HCU registers.
+ * @engine: Crypto engine for the device.
+ * @irq: IRQ number.
+ * @irq_done: Completion for IRQ.
+ * @irq_err: Flag indicating an IRQ error has happened.
+ */
+struct ocs_hcu_dev {
+ struct list_head list;
+ struct device *dev;
+ void __iomem *io_base;
+ struct crypto_engine *engine;
+ int irq;
+ struct completion irq_done;
+ bool irq_err;
+};
+
+/**
+ * struct ocs_hcu_idata - Intermediate data generated by the HCU.
+ * @msg_len_lo: Length of data the HCU has operated on in bits, low 32b.
+ * @msg_len_hi: Length of data the HCU has operated on in bits, high 32b.
+ * @digest: The digest read from the HCU. If the HCU is terminated, it will
+ * contain the actual hash digest. Otherwise it is the intermediate
+ * state.
+ */
+struct ocs_hcu_idata {
+ u32 msg_len_lo;
+ u32 msg_len_hi;
+ u8 digest[SHA512_DIGEST_SIZE];
+};
+
+/**
+ * struct ocs_hcu_hash_ctx - Context for OCS HCU hashing operation.
+ * @algo: The hashing algorithm being used.
+ * @idata: The current intermediate data.
+ */
+struct ocs_hcu_hash_ctx {
+ enum ocs_hcu_algo algo;
+ struct ocs_hcu_idata idata;
+};
+
+irqreturn_t ocs_hcu_irq_handler(int irq, void *dev_id);
+
+struct ocs_hcu_dma_list *ocs_hcu_dma_list_alloc(struct ocs_hcu_dev *hcu_dev,
+ int max_nents);
+
+void ocs_hcu_dma_list_free(struct ocs_hcu_dev *hcu_dev,
+ struct ocs_hcu_dma_list *dma_list);
+
+int ocs_hcu_dma_list_add_tail(struct ocs_hcu_dev *hcu_dev,
+ struct ocs_hcu_dma_list *dma_list,
+ dma_addr_t addr, u32 len);
+
+int ocs_hcu_hash_init(struct ocs_hcu_hash_ctx *ctx, enum ocs_hcu_algo algo);
+
+int ocs_hcu_hash_update(struct ocs_hcu_dev *hcu_dev,
+ struct ocs_hcu_hash_ctx *ctx,
+ const struct ocs_hcu_dma_list *dma_list);
+
+int ocs_hcu_hash_finup(struct ocs_hcu_dev *hcu_dev,
+ const struct ocs_hcu_hash_ctx *ctx,
+ const struct ocs_hcu_dma_list *dma_list,
+ u8 *dgst, size_t dgst_len);
+
+int ocs_hcu_hash_final(struct ocs_hcu_dev *hcu_dev,
+ const struct ocs_hcu_hash_ctx *ctx, u8 *dgst,
+ size_t dgst_len);
+
+#endif /* _CRYPTO_OCS_HCU_H */
--
2.26.2
