Until now, the inside-secure driver required a set of firmware images
supplied by the silicon vendor, typically under NDA, to be present in
/lib/firmware/inside-secure in order to be able to function.
This patch removes the dependence on this official vendor firmware by
falling back to generic "mini" FW - developed specifically for this
driver - that can be provided under GPL 2.0 through linux-firmwares.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@xxxxxxxxxxxxxx>
---
drivers/crypto/inside-secure/safexcel.c | 194 ++++++++++++++++++++++++--------
drivers/crypto/inside-secure/safexcel.h | 6 +
2 files changed, 153 insertions(+), 47 deletions(-)
diff --git a/drivers/crypto/inside-secure/safexcel.c b/drivers/crypto/inside-secure/safexcel.c
index fe9b6d0..503fef0 100644
--- a/drivers/crypto/inside-secure/safexcel.c
+++ b/drivers/crypto/inside-secure/safexcel.c
@@ -108,44 +108,139 @@ static void eip197_trc_cache_init(struct safexcel_crypto_priv *priv)
writel(val, priv->base + EIP197_TRC_PARAMS);
}
-static void eip197_write_firmware(struct safexcel_crypto_priv *priv,
- const struct firmware *fw, int pe, u32 ctrl,
- u32 prog_en)
+static void eip197_init_firmware(struct safexcel_crypto_priv *priv)
{
- const u32 *data = (const u32 *)fw->data;
+ int pe, i;
u32 val;
- int i;
- /* Reset the engine to make its program memory accessible */
- writel(EIP197_PE_ICE_x_CTRL_SW_RESET |
- EIP197_PE_ICE_x_CTRL_CLR_ECC_CORR |
- EIP197_PE_ICE_x_CTRL_CLR_ECC_NON_CORR,
- EIP197_PE(priv) + ctrl);
+ for (pe = 0; pe < priv->config.pes; pe++) {
+ /* Configure the token FIFO's */
+ writel(3, EIP197_PE(priv) + EIP197_PE_ICE_PUTF_CTRL(pe));
+ writel(0, EIP197_PE(priv) + EIP197_PE_ICE_PPTF_CTRL(pe));
- /* Enable access to the program memory */
- writel(prog_en, EIP197_PE(priv) + EIP197_PE_ICE_RAM_CTRL(pe));
+ /* Clear the ICE scratchpad memory */
+ val = readl(EIP197_PE(priv) + EIP197_PE_ICE_SCRATCH_CTRL(pe));
+ val |= EIP197_PE_ICE_SCRATCH_CTRL_CHANGE_TIMER |
+ EIP197_PE_ICE_SCRATCH_CTRL_TIMER_EN |
+ EIP197_PE_ICE_SCRATCH_CTRL_SCRATCH_ACCESS |
+ EIP197_PE_ICE_SCRATCH_CTRL_CHANGE_ACCESS;
+ writel(val, EIP197_PE(priv) + EIP197_PE_ICE_SCRATCH_CTRL(pe));
+
+ /* clear the scratchpad RAM using 32 bit writes only */
+ for (i = 0; i < EIP197_NUM_OF_SCRATCH_BLOCKS; i++)
+ writel(0, EIP197_PE(priv) +
+ EIP197_PE_ICE_SCRATCH_RAM(pe) + (i<<2));
+
+ /* Reset the IFPP engine to make its program mem accessible */
+ writel(EIP197_PE_ICE_x_CTRL_SW_RESET |
+ EIP197_PE_ICE_x_CTRL_CLR_ECC_CORR |
+ EIP197_PE_ICE_x_CTRL_CLR_ECC_NON_CORR,
+ EIP197_PE(priv) + EIP197_PE_ICE_FPP_CTRL(pe));
+
+ /* Reset the IPUE engine to make its program mem accessible */
+ writel(EIP197_PE_ICE_x_CTRL_SW_RESET |
+ EIP197_PE_ICE_x_CTRL_CLR_ECC_CORR |
+ EIP197_PE_ICE_x_CTRL_CLR_ECC_NON_CORR,
+ EIP197_PE(priv) + EIP197_PE_ICE_PUE_CTRL(pe));
+
+ /* Enable access to all IFPP program memories */
+ writel(EIP197_PE_ICE_RAM_CTRL_FPP_PROG_EN,
+ EIP197_PE(priv) + EIP197_PE_ICE_RAM_CTRL(pe));
+ }
+
+}
+
+static int eip197_write_firmware(struct safexcel_crypto_priv *priv,
+ const struct firmware *fw)
+{
+ const u32 *data = (const u32 *)fw->data;
+ int i;
/* Write the firmware */
for (i = 0; i < fw->size / sizeof(u32); i++)
writel(be32_to_cpu(data[i]),
priv->base + EIP197_CLASSIFICATION_RAMS + i * sizeof(u32));
- /* Disable access to the program memory */
- writel(0, EIP197_PE(priv) + EIP197_PE_ICE_RAM_CTRL(pe));
+ return i - 2;
+}
+
+/*
+ * If FW is actual production firmware, then poll for its initialization
+ * to complete and check if it is good for the HW, otherwise just return OK.
+ */
+static bool poll_fw_ready(struct safexcel_crypto_priv *priv, int fpp)
+{
+ int pe, pollcnt;
+ u32 base, pollofs;
- /* Release engine from reset */
- val = readl(EIP197_PE(priv) + ctrl);
- val &= ~EIP197_PE_ICE_x_CTRL_SW_RESET;
- writel(val, EIP197_PE(priv) + ctrl);
+ if (fpp)
+ pollofs = EIP197_FW_FPP_READY;
+ else
+ pollofs = EIP197_FW_PUE_READY;
+
+ for (pe = 0; pe < priv->config.pes; pe++) {
+ base = EIP197_PE_ICE_SCRATCH_RAM(pe);
+ pollcnt = EIP197_FW_START_POLLCNT;
+ while (pollcnt &&
+ (readl(EIP197_PE(priv) + base +
+ pollofs) != 1)) {
+ pollcnt--;
+ cpu_relax();
+ }
+ if (!pollcnt) {
+ dev_err(priv->dev, "FW(%d) for PE %d failed to start",
+ fpp, pe);
+ return false;
+ }
+ }
+ return true;
+}
+
+static bool eip197_start_firmware(struct safexcel_crypto_priv *priv,
+ int ipuesz, int ifppsz, int minifw)
+{
+ int pe;
+ u32 val;
+
+ for (pe = 0; pe < priv->config.pes; pe++) {
+ /* Disable access to all program memory */
+ writel(0, EIP197_PE(priv) + EIP197_PE_ICE_RAM_CTRL(pe));
+
+ /* Start IFPP microengines */
+ if (minifw)
+ val = 0;
+ else
+ val = (((ifppsz - 1) & 0x7ff0) << 16) | BIT(3);
+ writel(val, EIP197_PE(priv) + EIP197_PE_ICE_FPP_CTRL(pe));
+
+ /* Start IPUE microengines */
+ if (minifw)
+ val = 0;
+ else
+ val = ((ipuesz - 1) & 0x7ff0) << 16 | BIT(3);
+ writel(val, EIP197_PE(priv) + EIP197_PE_ICE_PUE_CTRL(pe));
+ }
+
+ /* For miniFW startup, there is no initialization, so always succeed */
+ if (minifw)
+ return true;
+
+ /* Wait until all the firmwares have properly started up */
+ if (!poll_fw_ready(priv, 1))
+ return false;
+ if (!poll_fw_ready(priv, 0))
+ return false;
+
+ return true;
}
static int eip197_load_firmwares(struct safexcel_crypto_priv *priv)
{
const char *fw_name[] = {"ifpp.bin", "ipue.bin"};
const struct firmware *fw[FW_NB];
- char fw_path[31], *dir = NULL;
+ char fw_path[37], *dir = NULL;
int i, j, ret = 0, pe;
- u32 val;
+ int ipuesz, ifppsz, minifw = 0;
if (priv->version == EIP97IES_MRVL)
/* No firmware is required */
@@ -156,52 +251,57 @@ static int eip197_load_firmwares(struct safexcel_crypto_priv *priv)
/* Default to minimum EIP197 config */
dir = "eip197b";
+retry_fw:
for (i = 0; i < FW_NB; i++) {
- snprintf(fw_path, 31, "inside-secure/%s/%s", dir, fw_name[i]);
- ret = request_firmware(&fw[i], fw_path, priv->dev);
+ snprintf(fw_path, 37, "inside-secure/%s/%s", dir, fw_name[i]);
+ ret = firmware_request_nowarn(&fw[i], fw_path, priv->dev);
if (ret) {
- if (!(priv->version == EIP197B_MRVL))
+ if (minifw || !(priv->version == EIP197B_MRVL))
goto release_fw;
/*
* Fallback to the old firmware location for the
* EIP197b.
*/
- ret = request_firmware(&fw[i], fw_name[i], priv->dev);
- if (ret) {
- dev_err(priv->dev,
- "Failed to request firmware %s (%d)\n",
- fw_name[i], ret);
+ ret = firmware_request_nowarn(&fw[i], fw_name[i],
+ priv->dev);
+ if (ret)
goto release_fw;
- }
}
}
- for (pe = 0; pe < priv->config.pes; pe++) {
- /* Clear the scratchpad memory */
- val = readl(EIP197_PE(priv) + EIP197_PE_ICE_SCRATCH_CTRL(pe));
- val |= EIP197_PE_ICE_SCRATCH_CTRL_CHANGE_TIMER |
- EIP197_PE_ICE_SCRATCH_CTRL_TIMER_EN |
- EIP197_PE_ICE_SCRATCH_CTRL_SCRATCH_ACCESS |
- EIP197_PE_ICE_SCRATCH_CTRL_CHANGE_ACCESS;
- writel(val, EIP197_PE(priv) + EIP197_PE_ICE_SCRATCH_CTRL(pe));
+ eip197_init_firmware(priv);
+
+ ifppsz = eip197_write_firmware(priv, fw[FW_IFPP]);
- memset_io(EIP197_PE(priv) + EIP197_PE_ICE_SCRATCH_RAM(pe), 0,
- EIP197_NUM_OF_SCRATCH_BLOCKS * sizeof(u32));
+ /* Enable access to IPUE program memories */
+ for (pe = 0; pe < priv->config.pes; pe++)
+ writel(EIP197_PE_ICE_RAM_CTRL_PUE_PROG_EN,
+ EIP197_PE(priv) + EIP197_PE_ICE_RAM_CTRL(pe));
- eip197_write_firmware(priv, fw[FW_IFPP], pe,
- EIP197_PE_ICE_FPP_CTRL(pe),
- EIP197_PE_ICE_RAM_CTRL_FPP_PROG_EN);
+ ipuesz = eip197_write_firmware(priv, fw[FW_IPUE]);
- eip197_write_firmware(priv, fw[FW_IPUE], pe,
- EIP197_PE_ICE_PUE_CTRL(pe),
- EIP197_PE_ICE_RAM_CTRL_PUE_PROG_EN);
+ if (eip197_start_firmware(priv, ipuesz, ifppsz, minifw)) {
+ dev_dbg(priv->dev, "Firmware loaded successfully");
+ return 0;
}
+ ret = -ENODEV;
+
release_fw:
for (j = 0; j < i; j++)
release_firmware(fw[j]);
+ if (!minifw) {
+ /* Retry with minifw path */
+ dev_dbg(priv->dev, "Firmware set not (fully) present or init failed, falling back to BCLA mode");
+ dir = "eip197_minifw";
+ minifw = 1;
+ goto retry_fw;
+ }
+
+ dev_dbg(priv->dev, "Firmware load failed.");
+
return ret;
}
diff --git a/drivers/crypto/inside-secure/safexcel.h b/drivers/crypto/inside-secure/safexcel.h
index d07bec1..ed47df0 100644
--- a/drivers/crypto/inside-secure/safexcel.h
+++ b/drivers/crypto/inside-secure/safexcel.h
@@ -136,8 +136,10 @@
#define EIP197_PE_IN_TBUF_THRES(n) (0x0100 + (0x2000 * (n)))
#define EIP197_PE_ICE_SCRATCH_RAM(n) (0x0800 + (0x2000 * (n)))
#define EIP197_PE_ICE_PUE_CTRL(n) (0x0c80 + (0x2000 * (n)))
+#define EIP197_PE_ICE_PUTF_CTRL(n) (0x0d00 + (0x2000 * (n)))
#define EIP197_PE_ICE_SCRATCH_CTRL(n) (0x0d04 + (0x2000 * (n)))
#define EIP197_PE_ICE_FPP_CTRL(n) (0x0d80 + (0x2000 * (n)))
+#define EIP197_PE_ICE_PPTF_CTRL(n) (0x0e00 + (0x2000 * (n)))
#define EIP197_PE_ICE_RAM_CTRL(n) (0x0ff0 + (0x2000 * (n)))
#define EIP197_PE_EIP96_TOKEN_CTRL(n) (0x1000 + (0x2000 * (n)))
#define EIP197_PE_EIP96_FUNCTION_EN(n) (0x1004 + (0x2000 * (n)))
@@ -530,6 +532,10 @@ struct safexcel_command_desc {
* Internal structures & functions
*/
+#define EIP197_FW_START_POLLCNT 16
+#define EIP197_FW_PUE_READY 0x14
+#define EIP197_FW_FPP_READY 0x18
+
enum eip197_fw {
FW_IFPP = 0,
FW_IPUE,
--
1.8.3.1
