Hi Krzysztof,
Some comments inline.
On Thu, Aug 30, 2018 at 07:15:39PM +0200, Krzysztof Kozlowski wrote:
> Add driver for using the Freescale/NXP Vybrid processor CRC block for
> CRC16 and CRC32 offloading. The driver implements shash_alg and was
> tested using internal testmgr tests and libkcapi.
>
> Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
> ---
> MAINTAINERS | 7 +
> drivers/crypto/Kconfig | 10 ++
> drivers/crypto/Makefile | 1 +
> drivers/crypto/vf-crc.c | 387 ++++++++++++++++++++++++++++++++++++++++++++++
> include/linux/crc32poly.h | 7 +
> 5 files changed, 412 insertions(+)
> create mode 100644 drivers/crypto/vf-crc.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 0a340f680230..e84fa829a4e4 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -15388,6 +15388,13 @@ S: Maintained
> F: Documentation/fb/uvesafb.txt
> F: drivers/video/fbdev/uvesafb.*
>
> +VF500/VF610 HW CRC DRIVER
> +M: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
> +L: linux-crypto@xxxxxxxxxxxxxxx
> +S: Maintained
> +F: drivers/crypto/vf-crc.c
> +F: Documentation/devicetree/bindings/crypto/fsl-vf610-crc.txt
> +
> VF610 NAND DRIVER
> M: Stefan Agner <stefan@xxxxxxxx>
> L: linux-mtd@xxxxxxxxxxxxxxxxxxx
> diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig
> index 20314d7a7b58..0ade940ac79c 100644
> --- a/drivers/crypto/Kconfig
> +++ b/drivers/crypto/Kconfig
> @@ -418,6 +418,16 @@ config CRYPTO_DEV_MXS_DCP
> To compile this driver as a module, choose M here: the module
> will be called mxs-dcp.
>
> +config CRYPTO_DEV_VF_CRC
> + tristate "Support for Freescale/NXP Vybrid CRC HW accelerator"
> + select CRYPTO_HASH
> + help
> + This option enables support for the CRC16/32 hardware accelerator
> + on Freescale/NXP Vybrid VF500/VF610 SoCs.
> +
> + To compile this driver as a module, choose M here: the module
> + will be called vf-crc.
> +
> config CRYPTO_DEV_EXYNOS_RNG
> tristate "EXYNOS HW pseudo random number generator support"
> depends on ARCH_EXYNOS || COMPILE_TEST
> diff --git a/drivers/crypto/Makefile b/drivers/crypto/Makefile
> index c23396f32c8a..418c08bdc19c 100644
> --- a/drivers/crypto/Makefile
> +++ b/drivers/crypto/Makefile
> @@ -41,6 +41,7 @@ obj-$(CONFIG_ARCH_STM32) += stm32/
> obj-$(CONFIG_CRYPTO_DEV_SUN4I_SS) += sunxi-ss/
> obj-$(CONFIG_CRYPTO_DEV_TALITOS) += talitos.o
> obj-$(CONFIG_CRYPTO_DEV_UX500) += ux500/
> +obj-$(CONFIG_CRYPTO_DEV_VF_CRC) += vf-crc.o
> obj-$(CONFIG_CRYPTO_DEV_VIRTIO) += virtio/
> obj-$(CONFIG_CRYPTO_DEV_VMX) += vmx/
> obj-$(CONFIG_CRYPTO_DEV_BCM_SPU) += bcm/
> +static int vf_crc_update_prepare(struct vf_crc_tfm_ctx *mctx,
> + struct vf_crc_desc_ctx *desc_ctx)
> +{
> + struct vf_crc *crc = desc_ctx->crc;
> + int ret;
> +
> + ret = clk_prepare_enable(crc->clk);
> + if (ret) {
> + dev_err(crc->dev, "Failed to enable clock\n");
> + return ret;
> + }
Generally have you measured the performance of this driver? Is it faster
than the software implementation?
Under certain circumstances a clk_prepare_enable might become expensive,
so it could happen that all this clk enabling/disabling takes longer
than the action you do in between. Using pm_runtime might help here.
> +
> + mutex_lock(&crc->lock);
> +
> + /*
> + * Check if we are continuing to process request already configured
> + * in HW. HW has to be re-initialized only on first update() for given
> + * request or if new request was processed after last call to update().
> + */
> + if (crc->processed_desc == desc_ctx)
> + return 0;
You never set crc->processed_desc to anything, so this optimization
never triggers.
Unless properly implementing this skip-to-reinitialize-hardware really
brings a measurerable performance gain I would just drop this
optimization. In the end you only save a few register writes, but it
makes the driver more complicated.
> +
> + vf_crc_initialize_regs(mctx, desc_ctx);
> +
> + return 0;
> +}
> +
> +static int vf_crc_finup(struct shash_desc *desc, const u8 *data,
> + unsigned int len, u8 *out)
> +{
> + return vf_crc_update(desc, data, len) ?:
> + vf_crc_final(desc, out);
> +}
> +
> +static int vf_crc_digest(struct shash_desc *desc, const u8 *data,
> + unsigned int leng, u8 *out)
> +{
> + return vf_crc_init(desc) ?: vf_crc_finup(desc, data, leng, out);
> +}
These seem unnecessary. The crypto core will set these with similar
wrappers if unspecified.
> +static int vf_crc_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct resource *res;
> + struct vf_crc *crc;
> + int ret;
> +
> + if (vf_crc_data) {
> + dev_err(dev, "Device already registered (only one instance allowed)\n");
> + return -EINVAL;
> + }
> +
> + crc = devm_kzalloc(dev, sizeof(*crc), GFP_KERNEL);
> + if (!crc)
> + return -ENOMEM;
> +
> + crc->dev = dev;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + crc->iobase = devm_ioremap_resource(dev, res);
> + if (IS_ERR(crc->iobase))
> + return PTR_ERR(crc->iobase);
> +
> + crc->clk = devm_clk_get(dev, "crc");
> + if (IS_ERR(crc->clk)) {
> + dev_err(dev, "Could not get clock\n");
> + return PTR_ERR(crc->clk);
> + }
> +
> + vf_crc_data = crc;
> +
> + ret = crypto_register_shashes(algs, ARRAY_SIZE(algs));
> + if (ret) {
> + dev_err(dev, "Failed to register crypto algorithms\n");
> + goto err;
> + }
> +
> + mutex_init(&crc->lock);
Should be done before the shashes are registered.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
