Hi, Add new driver for Freescale/NXP Vybrid CRC HW accelerator along with prerequisities: 1. Clock, 2. Bindings, 3. CRC16 test tables for testing. Patch 3/6 (ARM: dts: vfxxx: Add node for CRC hardware block) depends on patch 2/6 (clk) so it should go in following cycle (after clk change hits mainline). Best regards, Krzysztof Krzysztof Kozlowski (6): dt-bindings: crypto: Add Freescale Vybrid CRC clk: imx: vf610: Add CRC clock ARM: dts: vfxxx: Add node for CRC hardware block crypto: testmgr - Add CRC16 test tables crypto - Group Freescale/NXP ARM architecture Kconfig entires together crypto: vf-crc - Add new driver for Freescale Vybrid CRC .../devicetree/bindings/crypto/fsl-vf610-crc.txt | 16 + MAINTAINERS | 7 + arch/arm/boot/dts/vfxxx.dtsi | 7 + crypto/testmgr.c | 6 + crypto/testmgr.h | 386 ++++++++++++++++++++ drivers/clk/imx/clk-vf610.c | 1 + drivers/crypto/Kconfig | 42 ++- drivers/crypto/Makefile | 1 + drivers/crypto/vf-crc.c | 387 +++++++++++++++++++++ include/dt-bindings/clock/vf610-clock.h | 3 +- include/linux/crc32poly.h | 7 + 11 files changed, 846 insertions(+), 17 deletions(-) create mode 100644 Documentation/devicetree/bindings/crypto/fsl-vf610-crc.txt create mode 100644 drivers/crypto/vf-crc.c -- 2.14.1
