Hello, This patch series adds a new driver supporting Marvell's CESA IP. This driver addresses some limitations of the existing one. >From a performance and CPU load point of view the most important limitation in the existing driver is the lack of DMA support, thus preventing us from chaining crypto operations. I know we usually try to adapt existing drivers instead of replacing them by new ones, but after trying to refactor the mv_cesa driver I realized it would take longer than writing an new one from scratch. Here are the main features brought by this new driver: - support for armada SoCs (up to 38x) while keeping support for older ones (Orion and Kirkwood). Note that old DT bindings (those used on Orion and Kirkwood platforms) are supported, or IOTW, old DTs are compatible with this new driver. - DMA mode to offload the CPU in case of intensive crypto usage - new algorithms: SHA256, DES and 3DES In addition to this driver comes a bunch of DT updates adding crypto device nodes to several Marvell SoCs (those are only the tested ones, others might be added later). I'd like to thank Arnaud, who has carefully reviewed several iterations of this driver, helped me improved my implementation, provided support for several crypto algorithms, provided support for armada-370 and tested the driver on different platforms, hence the SoB and dual MODULE_AUTHOR in the driver code. Best Regards, Boris Changes since v2: - fixes in the cipher code (->dst_nents was assigned the ->src_nents value and CBC state was overwritten by the IV after each chunk operation) - spit the code as suggested by Sebastian Changes since v1: - (suggested by Jason) kept the existing CESA driver and added a mechanism to prevent the new driver from probing devices handled my the existing one (Orion and Kirkwood platforms) - (reported by Paul) addressed a few Kconfig and module definition issues - (suggested by Andrew) added DT changes to the series Arnaud Ebalard (6): crypto: marvell/CESA: add Triple-DES support crypto: marvell/CESA: add MD5 support crypto: marvell/CESA: add SHA256 support crypto: marvell/CESA: add support for Kirkwood SoCs ARM: marvell/dt: add crypto node to armada 370 dtsi ARM: marvell/dt: add crypto node to kirkwood dtsi Boris Brezillon (10): crypto: mv_cesa: request registers memory region crypto: add a new driver for Marvell's CESA crypto: marvell/CESA: add TDMA support crypto: marvell/CESA: add DES support crypto: marvell/CESA: add support for all armada SoCs crypto: marvell/CESA: add allhwsupport module parameter crypto: marvell/CESA: add support for Orion SoCs crypto: marvell/CESA: update DT bindings documentation ARM: marvell/dt: add crypto node to armada-xp.dtsi ARM: marvell/dt: enable crypto on armada-xp-gp .../devicetree/bindings/crypto/marvell-cesa.txt | 46 + arch/arm/boot/dts/armada-370.dtsi | 20 + arch/arm/boot/dts/armada-xp-gp.dts | 4 +- arch/arm/boot/dts/armada-xp.dtsi | 31 + arch/arm/boot/dts/kirkwood.dtsi | 2 +- drivers/crypto/Kconfig | 18 + drivers/crypto/Makefile | 1 + drivers/crypto/marvell/Makefile | 2 + drivers/crypto/marvell/cesa.c | 543 ++++++++ drivers/crypto/marvell/cesa.h | 804 ++++++++++++ drivers/crypto/marvell/cipher.c | 769 +++++++++++ drivers/crypto/marvell/hash.c | 1349 ++++++++++++++++++++ drivers/crypto/marvell/tdma.c | 224 ++++ drivers/crypto/mv_cesa.c | 13 +- 14 files changed, 3816 insertions(+), 10 deletions(-) create mode 100644 Documentation/devicetree/bindings/crypto/marvell-cesa.txt create mode 100644 drivers/crypto/marvell/Makefile create mode 100644 drivers/crypto/marvell/cesa.c create mode 100644 drivers/crypto/marvell/cesa.h create mode 100644 drivers/crypto/marvell/cipher.c create mode 100644 drivers/crypto/marvell/hash.c create mode 100644 drivers/crypto/marvell/tdma.c -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-crypto" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
