As suggested by Marc there now is a union plus a struct ev_can_err_ext for easier decoding of an ESD_EV_CAN_ERROR_EXT event message (which simply is a rx_msg with some dedicated data). Suggested-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx> Link: https://lore.kernel.org/linux-can/20220621071152.ggyhrr5sbzvwpkpx@xxxxxxxxxxxxxx/ Signed-off-by: Frank Jungclaus <frank.jungclaus@xxxxxx> --- drivers/net/can/usb/esd_usb.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) diff --git a/drivers/net/can/usb/esd_usb.c b/drivers/net/can/usb/esd_usb.c index 09745751f168..f90bb2c0ba15 100644 --- a/drivers/net/can/usb/esd_usb.c +++ b/drivers/net/can/usb/esd_usb.c @@ -127,7 +127,15 @@ struct rx_msg { u8 dlc; __le32 ts; __le32 id; /* upper 3 bits contain flags */ - u8 data[8]; + union { + u8 data[8]; + struct { + u8 status; /* CAN Controller Status */ + u8 ecc; /* Error Capture Register */ + u8 rec; /* RX Error Counter */ + u8 tec; /* TX Error Counter */ + } ev_can_err_ext; /* For ESD_EV_CAN_ERROR_EXT */ + }; }; struct tx_msg { @@ -229,10 +237,10 @@ static void esd_usb_rx_event(struct esd_usb_net_priv *priv, u32 id = le32_to_cpu(msg->msg.rx.id) & ESD_IDMASK; if (id == ESD_EV_CAN_ERROR_EXT) { - u8 state = msg->msg.rx.data[0]; - u8 ecc = msg->msg.rx.data[1]; - u8 rxerr = msg->msg.rx.data[2]; - u8 txerr = msg->msg.rx.data[3]; + u8 state = msg->msg.rx.ev_can_err_ext.status; + u8 ecc = msg->msg.rx.ev_can_err_ext.ecc; + u8 rxerr = msg->msg.rx.ev_can_err_ext.rec; + u8 txerr = msg->msg.rx.ev_can_err_ext.tec; netdev_dbg(priv->netdev, "CAN_ERR_EV_EXT: dlc=%#02x state=%02x ecc=%02x rec=%02x tec=%02x\n", -- 2.25.1
