Hi Marc,
On Thu, Jun 9, 2022 at 9:16 AM Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx> wrote:
>
> On 07.06.2022 11:47:45, Dario Binacchi wrote:
> > This is a preparation patch for the upcoming support to change the
> > bitrate via ip tool, reset the adapter error states via the ethtool API
> > and, more generally, send commands to the adapter.
> >
> > Since some commands (e. g. setting the bitrate) will be sent before
> > calling the open_candev(), the netif_running() will return false and so
> > a new flag bit (i. e. SLF_XCMD) for serial transmission has to be added.
> >
> > Signed-off-by: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
>
> I think this patch can be dropped, let me explain:
>
> You don't have to implement the do_set_bittiming callback. It's
> perfectly OK to set the bitrate during the ndo_open callback after
> open_candev().
I developed what you suggested (i. e. remove the SLF_XCMD bit and set the
bitrate, as well as send the "F\r" and "O\r" commands, after calling
the open_candev(),
but now I can't send the close command ("C\r") during the ndo_stop() since
netif_running() returns false. The CAN framework clears netif_running() before
calling the ndo_stop(). IMHO the SLF_XCMD bit then becomes necessary to
transmit the commands to the adapter from the ndo_open() and
ndo_stop() routines.
Any suggestions ?
Thanks and regards,
Dario
>
> regards,
> Marc
>
> --
> Pengutronix e.K. | Marc Kleine-Budde |
> Embedded Linux | https://www.pengutronix.de |
> Vertretung West/Dortmund | Phone: +49-231-2826-924 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
--
Dario Binacchi
Embedded Linux Developer
dario.binacchi@xxxxxxxxxxxxxxxxxxxx
__________________________________
Amarula Solutions SRL
Via Le Canevare 30, 31100 Treviso, Veneto, IT
T. +39 042 243 5310
info@xxxxxxxxxxxxxxxxxxxx
www.amarulasolutions.com
