Re: [PATCH net v2 3/3] can: j1939: j1939_tp_cmd_recv(): check the dst address of TP.CM_BAM

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Oct 28, 2021 at 10:38:27PM +0800, Zhang Changzhong wrote:
> The TP.CM_BAM message must be sent to the global address [1], so add a
> check to drop TP.CM_BAM sent to a non-global address.
> 
> Without this patch, the receiver will treat the following packets as
> normal RTS/CTS tranport:
> 18EC0102#20090002FF002301
> 18EB0102#0100000000000000
> 18EB0102#020000FFFFFFFFFF
> 
> [1] SAE-J1939-82 2015 A.3.3 Row 1.
> 
> Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
> Signed-off-by: Zhang Changzhong <zhangchangzhong@xxxxxxxxxx>

Acked-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>

> ---
>  net/can/j1939/transport.c | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/net/can/j1939/transport.c b/net/can/j1939/transport.c
> index 05eb3d0..a271688 100644
> --- a/net/can/j1939/transport.c
> +++ b/net/can/j1939/transport.c
> @@ -2023,6 +2023,11 @@ static void j1939_tp_cmd_recv(struct j1939_priv *priv, struct sk_buff *skb)
>  		extd = J1939_ETP;
>  		fallthrough;
>  	case J1939_TP_CMD_BAM:
> +		if (cmd == J1939_TP_CMD_BAM && !j1939_cb_is_broadcast(skcb)) {
> +			netdev_err_once(priv->ndev, "%s: BAM to unicast (%02x), ignoring!\n",
> +					__func__, skcb->addr.sa);
> +			return;
> +		}
>  		fallthrough;
>  	case J1939_TP_CMD_RTS:
>  		if (skcb->addr.type != extd)
> -- 
> 2.9.5
> 
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |



[Index of Archives]     [Automotive Discussions]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]     [CAN Bus]

  Powered by Linux