From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> In some configurations, mainly ACPI-based, the clock frequency of the device is supplied by very well established 'clock-frequency' property. Hence, try to get it from the property at last if no other providers are available. Link: https://lore.kernel.org/r/20210531084444.1785397-1-mkl@xxxxxxxxxxxxxx Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> Signed-off-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx> --- drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c index 6962ab2749df..1544e19b60b9 100644 --- a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c +++ b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c @@ -2860,7 +2860,7 @@ static int mcp251xfd_probe(struct spi_device *spi) struct gpio_desc *rx_int; struct regulator *reg_vdd, *reg_xceiver; struct clk *clk; - u32 freq; + u32 freq = 0; int err; if (!spi->irq) @@ -2887,11 +2887,19 @@ static int mcp251xfd_probe(struct spi_device *spi) return dev_err_probe(&spi->dev, PTR_ERR(reg_xceiver), "Failed to get Transceiver regulator!\n"); - clk = devm_clk_get(&spi->dev, NULL); + clk = devm_clk_get_optional(&spi->dev, NULL); if (IS_ERR(clk)) return dev_err_probe(&spi->dev, PTR_ERR(clk), "Failed to get Oscillator (clock)!\n"); - freq = clk_get_rate(clk); + if (clk) { + freq = clk_get_rate(clk); + } else { + err = device_property_read_u32(&spi->dev, "clock-frequency", + &freq); + if (err) + return dev_err_probe(&spi->dev, err, + "Failed to get clock-frequency!\n"); + } /* Sanity check */ if (freq < MCP251XFD_SYSCLOCK_HZ_MIN || -- 2.30.2
