Hello Jakub, hello David, this is a pull request of 46 patches for net-next/master. The first 6 patches target the CAN J1939 protocol. One is from gushengxian, fixing a grammatical error, 5 are by me fixing a checkpatch warning, make use of the fallthrough pseudo-keyword, and use consistent variable naming. The next 3 patches target the rx-offload helper, are by me and improve the performance and fix the local softirq work pending error, when napi_schedule() is called from threaded IRQ context. The next 3 patches are by Vincent Mailhol and me update the CAN bittiming and transmitter delay compensation, the documentation for the struct can_tdc is fixed, clear data_bittiming if FD mode is turned off and a redundant check is removed. Followed by 4 patches targeting the m_can driver. Faiz Abbas's patches add support for CAN PHY via the generic phy subsystem. Yang Yingliang converts the driver to use devm_platform_ioremap_resource_byname(). And a patch by me which removes the unused support for custom bit timing. Andy Shevchenko contributes 2 patches for the mcp251xfd driver to prepare the driver for ACPI support. A patch by me adds support for shared IRQ handlers. Zhen Lei contributes 3 patches to convert the esd_usb2, janz-ican3 and the at91_can driver to make use of the DEVICE_ATTR_RO/RW() macros. The next 8 patches are by Peng Li and provide general cleanups for the at91_can driver. The next 7 patches target the peak driver. Frist 2 cleanup patches by me for the peak_pci driver, followed by Stephane Grosjean' patch to print the name and firmware version of the detected hardware. The peak_usb driver gets a cleanup patch, loopback and one-shot mode and an upgrading of the bus state change handling in Stephane Grosjean's patches. Vincent Mailhol provides 6 cleanup patches for the etas_es58x driver. In the last 3 patches Angelo Dureghello add support for the mcf5441x SoC to the flexcan driver. regards, Marc --- The following changes since commit 0e804326759de7b9991353dd66b03595b5c3f544: Merge branch 'nfc-const' (2021-07-25 09:21:32 +0100) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next.git tags/linux-can-next-for-5.15-20210725 for you to fetch changes up to 8dad5561c13ade87238d9de6dd410b43f7562447: can: flexcan: update Kconfig to enable coldfire (2021-07-25 11:36:29 +0200) ---------------------------------------------------------------- linux-can-next-for-5.15-20210725 ---------------------------------------------------------------- Andy Shevchenko (2): can: mcp251xfd: mcp251xfd_probe(): try to get crystal clock rate from property can: mcp251xfd: Fix header block to clarify independence from OF Angelo Dureghello (3): can: flexcan: add platform data header can: flexcan: add mcf5441x support can: flexcan: update Kconfig to enable coldfire Faiz Abbas (2): dt-bindings: net: can: Document transceiver implementation as phy can: m_can: Add support for transceiver as phy Marc Kleine-Budde (13): can: j1939: fix checkpatch warnings can: j1939: replace fall through comment by fallthrough pseudo-keyword can: j1939: j1939_session_completed(): use consistent name se_skb for the session skb can: j1939: j1939_session_tx_dat(): use consistent name se_skcb for session skb control buffer can: j1939: j1939_xtp_rx_dat_one(): use separate pointer for session skb control buffer can: rx-offload: add skb queue for use during ISR can: rx-offload: can_rx_offload_irq_finish(): directly call napi_schedule() can: rx-offload: can_rx_offload_threaded_irq_finish(): add new function to be called from threaded interrupt can: bittiming: fix documentation for struct can_tdc can: m_can: remove support for custom bit timing can: mcp251xfd: mcp251xfd_open(): request IRQ as shared can: peak_pci: convert comments to network style comments can: peak_pci: fix checkpatch warnings Peng Li (8): net: at91_can: remove redundant blank lines net: at91_can: add blank line after declarations net: at91_can: fix the code style issue about macro net: at91_can: use BIT macro net: at91_can: fix the alignment issue net: at91_can: add braces {} to all arms of the statement net: at91_can: remove redundant space net: at91_can: fix the comments style issue Stephane Grosjean (5): can: peak_pci: Add name and FW version of the card in kernel buffer can: peak_usb: pcan_usb_get_device_id(): read value only in case of success can: peak_usb: PCAN-USB: add support of loopback and one-shot mode can: peak_usb: pcan_usb_encode_msg(): add information can: peak_usb: pcan_usb_decode_error(): upgrade handling of bus state changes Vincent Mailhol (8): can: netlink: clear data_bittiming if FD is turned off can: netlink: remove redundant check in can_validate() can: etas_es58x: fix three typos in author name and documentation can: etas_es58x: use error pointer during device probing can: etas_es58x: use devm_kzalloc() to allocate device resources can: etas_es58x: add es58x_free_netdevs() to factorize code can: etas_es58x: use sizeof and sizeof_field macros instead of constant values can: etas_es58x: rewrite the message cast in es58{1,_fd}_tx_can_msg to increase readability Yang Yingliang (1): can: m_can: use devm_platform_ioremap_resource_byname Zhen Lei (3): can: esd_usb2: use DEVICE_ATTR_RO() helper macro can: janz-ican3: use DEVICE_ATTR_RO/RW() helper macro can: at91_can: use DEVICE_ATTR_RW() helper macro gushengxian (1): can: j1939: j1939_sk_sock_destruct(): correct a grammatical error .../devicetree/bindings/net/can/bosch,m_can.yaml | 3 + drivers/net/can/Kconfig | 3 +- drivers/net/can/at91_can.c | 137 ++++++------- drivers/net/can/dev/netlink.c | 9 +- drivers/net/can/dev/rx-offload.c | 90 +++++--- drivers/net/can/flexcan.c | 127 ++++++++++-- drivers/net/can/janz-ican3.c | 23 +-- drivers/net/can/m_can/m_can.c | 38 ++-- drivers/net/can/m_can/m_can.h | 5 +- drivers/net/can/m_can/m_can_platform.c | 16 +- drivers/net/can/sja1000/peak_pci.c | 119 ++++++----- drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c | 28 ++- drivers/net/can/ti_hecc.c | 2 + drivers/net/can/usb/esd_usb2.c | 12 +- drivers/net/can/usb/etas_es58x/es581_4.c | 5 +- drivers/net/can/usb/etas_es58x/es58x_core.c | 82 ++++---- drivers/net/can/usb/etas_es58x/es58x_core.h | 2 +- drivers/net/can/usb/etas_es58x/es58x_fd.c | 19 +- drivers/net/can/usb/peak_usb/pcan_usb.c | 228 +++++++++------------ include/linux/can/bittiming.h | 4 +- include/linux/can/platform/flexcan.h | 23 +++ include/linux/can/rx-offload.h | 8 +- net/can/j1939/socket.c | 2 +- net/can/j1939/transport.c | 42 ++-- 24 files changed, 584 insertions(+), 443 deletions(-) create mode 100644 include/linux/can/platform/flexcan.h