Re: [PATCH v2 1/5] dt-bindings: net: can: renesas,rcar-canfd: Document RZ/G2L SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Lad,

On Mon, 2021-07-19 at 15:38 +0100, Lad Prabhakar wrote:
> Add CANFD binding documentation for Renesas RZ/G2L SoC.
> 
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> Reviewed-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> ---
>  .../bindings/net/can/renesas,rcar-canfd.yaml  | 66 +++++++++++++++++--
>  1 file changed, 60 insertions(+), 6 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml b/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml
> index 0b33ba9ccb47..4fb6dd370904 100644
> --- a/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml
> +++ b/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml
> @@ -30,13 +30,15 @@ properties:
>                - renesas,r8a77995-canfd     # R-Car D3
>            - const: renesas,rcar-gen3-canfd # R-Car Gen3 and RZ/G2
>  
> +      - items:
> +          - enum:
> +              - renesas,r9a07g044-canfd    # RZ/G2{L,LC}
> +          - const: renesas,rzg2l-canfd     # RZ/G2L family
> +
>    reg:
>      maxItems: 1
>  
> -  interrupts:
> -    items:
> -      - description: Channel interrupt
> -      - description: Global interrupt
> +  interrupts: true
>  
>    clocks:
>      maxItems: 3
> @@ -50,8 +52,7 @@ properties:
>    power-domains:
>      maxItems: 1
>  
> -  resets:
> -    maxItems: 1
> +  resets: true
>  
>    renesas,no-can-fd:
>      $ref: /schemas/types.yaml#/definitions/flag
> @@ -91,6 +92,59 @@ required:
>    - channel0
>    - channel1
>  
> +if:
> +  properties:
> +    compatible:
> +      contains:
> +        enum:
> +          - renesas,rzg2l-canfd
> +then:
> +  properties:
> +    interrupts:
> +      items:
> +        - description: CAN global error interrupt
> +        - description: CAN receive FIFO interrupt
> +        - description: CAN0 error interrupt
> +        - description: CAN0 transmit interrupt
> +        - description: CAN0 transmit/receive FIFO receive completion interrupt
> +        - description: CAN1 error interrupt
> +        - description: CAN1 transmit interrupt
> +        - description: CAN1 transmit/receive FIFO receive completion interrupt
> +
> +    interrupt-names:
> +      items:
> +        - const: g_error
> +        - const: g_rx_fifo
> +        - const: can0_error
> +        - const: can0_tx
> +        - const: can0_tx_rx_fifo_receive_completion
> +        - const: can1_error
> +        - const: can1_tx
> +        - const: can1_tx_rx_fifo_receive_completion
> +
> +    resets:
> +      items:
> +        - description: CANFD_RSTP_N
> +        - description: CANFD_RSTC_N

Do you know what the "P" and "C" stands for? It would be nice if the
description could tell us what the reset lines are used for.

I would prefer if you used these names (or shortened versions, for
example "rstp_n", "rstc_n") as "reset-names" and let the driver
reference the resets by name instead of by index.

regards
Philipp



[Index of Archives]     [Automotive Discussions]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]     [CAN Bus]

  Powered by Linux