This patch fixes two grammar errors in the documentation for struct
can_tdc.
First grammar error: add a missing third person 's'.
Second grammar error: replace "such as" by "such that". The intent is
to give a condition, not an example.
Fixes: 289ea9e4ae59 ("can: add new CAN FD bittiming parameters: Transmitter Delay Compensation (TDC)")
Signed-off-by: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
---
Hi Marc,
If that makes sense to you, feel free to squash this in your other
patch.
---
include/linux/can/bittiming.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/include/linux/can/bittiming.h b/include/linux/can/bittiming.h
index d61d8716345e..9de6e9053e34 100644
--- a/include/linux/can/bittiming.h
+++ b/include/linux/can/bittiming.h
@@ -37,7 +37,7 @@
* quanta, from when the bit is sent on the TX pin to when it is
* received on the RX pin of the transmitter. Possible options:
*
- * 0: automatic mode. The controller dynamically measure @tdcv
+ * 0: automatic mode. The controller dynamically measures @tdcv
* for each transmitted CAN FD frame.
*
* Other values: manual mode. Use the fixed provided value.
@@ -45,7 +45,7 @@
* @tdco: Transmitter Delay Compensation Offset. Offset value, in time
* quanta, defining the distance between the start of the bit
* reception on the RX pin of the transceiver and the SSP
- * position such as SSP = @tdcv + @tdco.
+ * position such that SSP = @tdcv + @tdco.
*
* If @tdco is zero, then TDC is disabled and both @tdcv and
* @tdcf should be ignored.
--
2.31.1
