From: Jimmy Assarsson <extja@xxxxxxxxxx>
Under certain circumstances, when switching from Kvaser's linuxcan driver
(kvpciefd) to the SocketCAN driver (kvaser_pciefd), the bus load reporting
is not disabled.
This is flooding the kernel log with prints like:
[3485.574677] kvaser_pciefd 0000:02:00.0: Received unexpected packet type 0x00000009
Always put the controller in the expected state, instead of assuming that
bus load reporting is inactive.
Note: If bus load reporting is enabled when the driver is loaded, you will
still get a number of bus load packages (and printouts), before it is
disabled.
Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices")
Signed-off-by: Jimmy Assarsson <extja@xxxxxxxxxx>
---
drivers/net/can/kvaser_pciefd.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/net/can/kvaser_pciefd.c b/drivers/net/can/kvaser_pciefd.c
index 37e05010ca91..74d9899fc904 100644
--- a/drivers/net/can/kvaser_pciefd.c
+++ b/drivers/net/can/kvaser_pciefd.c
@@ -57,6 +57,7 @@ MODULE_DESCRIPTION("CAN driver for Kvaser CAN/PCIe devices");
#define KVASER_PCIEFD_KCAN_STAT_REG 0x418
#define KVASER_PCIEFD_KCAN_MODE_REG 0x41c
#define KVASER_PCIEFD_KCAN_BTRN_REG 0x420
+#define KVASER_PCIEFD_KCAN_BUS_LOAD_REG 0x424
#define KVASER_PCIEFD_KCAN_BTRD_REG 0x428
#define KVASER_PCIEFD_KCAN_PWM_REG 0x430
/* Loopback control register */
@@ -949,6 +950,9 @@ static int kvaser_pciefd_setup_can_ctrls(struct kvaser_pciefd *pcie)
timer_setup(&can->bec_poll_timer, kvaser_pciefd_bec_poll_timer,
0);
+ /* Disable Bus load reporting */
+ iowrite32(0, can->reg_base + KVASER_PCIEFD_KCAN_BUS_LOAD_REG);
+
tx_npackets = ioread32(can->reg_base +
KVASER_PCIEFD_KCAN_TX_NPACKETS_REG);
if (((tx_npackets >> KVASER_PCIEFD_KCAN_TX_NPACKETS_MAX_SHIFT) &
--
2.30.0
