[PATCH 0/3] can/peak_usb: Added improvement to the peak_usb driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This series of patches adds the following improvements:

- allows to identify CAN ports by their LEDs
- completes the list of devices supported by the module
- adds ONE_SHOT mode to some devices

Signed-off-by: Stephane Grosjean <s.grosjean@xxxxxxxxxxxxxxx>
Stephane Grosjean (3):
  can/peak_usb: add support of ethtool set_phys_id() callback
  can/peak_usb: add forgotten supported devices
  can/peak_usb: add support of ONE_SHOT mode

 drivers/net/can/usb/peak_usb/pcan_usb.c      | 47 ++++++++++++++++++++
 drivers/net/can/usb/peak_usb/pcan_usb_core.c |  4 ++
 drivers/net/can/usb/peak_usb/pcan_usb_core.h |  2 +
 drivers/net/can/usb/peak_usb/pcan_usb_fd.c   | 47 ++++++++++++++++++--
 drivers/net/can/usb/peak_usb/pcan_usb_pro.c  | 46 +++++++++++++++++--
 drivers/net/can/usb/peak_usb/pcan_usb_pro.h  |  6 +++
 6 files changed, 144 insertions(+), 8 deletions(-)

-- 
2.25.1




[Index of Archives]     [Automotive Discussions]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]     [CAN Bus]

  Powered by Linux